network card problem

Below is how I do to configure the 3com Ethernet card on my laptop.

I has qnx4.25 patch G and the update version of network driver.

I have problem showing “Total Packets Txd OK and Rxd OK” are all zero

Any solution?

pccard -v

20:40:55 18 5 Socket state 80

20:40:55 18 5 Card Inserted
20:40:55 18 5 3.3V Card
20:40:55 18 5 Powered up 2
20:40:56 18 5 Single-function Card
20:40:56 18 5 Window 6 - Socket 1 - Size 0
20:40:56 18 5 State - I/O / Disabled
20:40:56 18 5 Base 0
20:40:56 18 5 Window 4 - Socket 1 - Size 0
20:40:56 18 5 State - Memory / Disabled
20:40:56 18 5 Base 0
00000000: 1303 4349 5320 0401 0157 5204 0603 0100 “…CIS …WR…”
00000010: 0000 0005 0d41 9a01 b51e 01b5 1e02 30ff “…A…0.”
00000020: ff01 0706 1100 4000 0000 1534 0500 3343 “…@…4…3C”
00000030: 6f6d 2043 6f72 706f 7261 7469 6f6e 0033 “om Corporation.3”
00000040: 4343 4645 3537 3543 5400 4c41 4e20 4361 “CCFE575CT.LAN Ca”
00000050: 7264 6275 7320 4361 7264 0030 3034 00ff “rdbus Card.004…”
00000060: 2102 0601 ffff ffff 8080 19ff ffff ffff “!..”

20:40:56 18 5 Socket state c0
20:40:56 18 5 Card Inserted

pc-pin

Sock Func Type Flags PID Base Size IRQ
1 Empty ----MF---------- None
1 Empty ----MF---------- None
2 0 Network C—I-±-----SAW None 0x1000 256 3
0x8101000 4096
2 Empty ----MF---------- None

netinfo -l

Total Number Of Net Driver Slots: 2

Driver Slot 0: Driver Pid 171 Logical Net 1 Network Card: Ethernet/
3Com575C Ethernet Controller
Vendor ID … 0x10b7
Device ID … 0x5257
Revision … 0x10
Physical Node ID … 000086 544262
Media Rate … 100Mb/s HDX
Mtu … 1514
I/O Port Range … 0x1000 → 0x107F
Hardware Interrupt … 3

Total Packets Txd OK ............. 0
Total Packets Txd Bad ............ 0
Tx Collision Errors .............. 0
Tx Collision Errors (aborted) .... 0
Carrier Sense Lost on Tx ......... 0
FIFO Underruns During Tx ......... 0
Tx deferred ...................... 0
Out of Window Collisions ......... 0

Total Packets Rxd OK ............. 0
Total Rx Errors .................. 0
FIFO Overruns During Rx .......... 0
Alignment errors ................. 0
CRC errors ....................... 0

Driver Slot 1: Unused