Hi together,
if have a VMWare Image wich is running QNX 6.3… In the VME config is newUSBcore = “FALSE”. When I start the Image in VmWare Player, I connect my USBstick (or any other USB drive) and do this:
io-usb -duhci -dohci -dehci
usb -V
devb-umass cam pnp &
after enter “usb -V” I receive this error message:
device 1 - descriptors - Input/Output error
in VMLog I can see:
Jul 21 10:49:09.872: vmx| USB: Found device [name:Datafab\ Removable\ Disk vid:07c4 pid:a600 path:1/3/4 speed:high family:storage]
Jul 21 10:49:11.204: vmx| USB: Device [name:Datafab\ Removable\ Disk vid:07c4 pid:a600 path:1/3/4 speed:high family:storage] should already be connected
Jul 21 10:49:13.527: vmx| USB: Device [name:Datafab\ Removable\ Disk vid:07c4 pid:a600 path:1/3/4 speed:high family:storage] should already be connected
Jul 21 10:49:22.300: vcpu-0| UHCI: Global Reset
Jul 21 10:49:23.301: vcpu-0| UHCI: HCReset
Jul 21 10:49:37.512: vmx| UHCI: unexpected in/out 0 pid 69
Jul 21 10:49:37.532: vmx| UHCI: unexpected in/out 0 pid 69
Jul 21 10:51:58.294: usbEnum| USB: Disconnecting device 0xe300000407c4a600
when I start the same VM Image wiht VmWare Server USb works fine - this will happen only on VMWare Player!
Any idea whats wrong ?
Thanks
Matthias