I just installed an Adaptec 1540CF ISA SCSI Adapter and an Iomega Jaz
Drive.
When I run Fsys.aha4scsi QNX identifies the drive but then
nothing shows up in /dev. I expected to see hd2.
My regular hard drive is IDE. The Jaz drive is the only SCSI device.
I don’t know how to mount the drive so I can read/write Jaz disks.
I just installed an Adaptec 1540CF ISA SCSI Adapter and an Iomega Jaz
Drive.
When I run Fsys.aha4scsi QNX identifies the drive but then
nothing shows up in /dev. I expected to see hd2.
My regular hard drive is IDE. The Jaz drive is the only SCSI device.
I don’t know how to mount the drive so I can read/write Jaz disks.
I have also used the Fsys.aha7scsi driver with this card and scsi hard
drives and JAZ drive connected to it. Good Luck.
John
Mitchell Schoenbrun wrote in message …
Try something like this
Fsys.aha4scsi fsys -n0=scsi
Then look for /dev/scsi0
rsperos@yahoo.com > wrote:
I just installed an Adaptec 1540CF ISA SCSI Adapter and an Iomega Jaz
Drive.
When I run Fsys.aha4scsi QNX identifies the drive but then
nothing shows up in /dev. I expected to see hd2.
My regular hard drive is IDE. The Jaz drive is the only SCSI device.
I don’t know how to mount the drive so I can read/write Jaz disks.