Hi!
I am wondering if anybody has ported Tcl/Tk and Tcl-DP for QNX4 and
Photon.
Kind Regards,
Henrik W. Maier
Senior Software Engineer
Henrik W. Maier Diplom-Ingenieur (Professional Engineer)
Powercorp Pty Ltd
3406 Export Drive
Trade Development Zone
Northern Territory 0822 Australia
Tel: +61 (0)8 8947 0933
Fax: +61 (0)8 8947 0925
Email: henrik@pcorp.com.au
Web Site: www.pcorp.com.au
Is there any possibility how to obtain binaries of TCL/Tk 8.4 or modified
sources for QNX ? I have potred version 8.0, but attempt to port version 8.4
wasn’t successful.
Jaro.
“Bruce Edge” <bedge@sattel.com> wrote in message
news:3992C984.C7D545E9@sattel.com…
The latest, 8.4 works great on QNX.
There’s a couple of minor nits in getting it built still, but it’s a very
usable package.
I’ve been using it for about 6 months now with good results.
The tuba debugger works on QNX, and, if you have TclPro for some other
platform, you can use it to remotely debug TCL apps on QNX.
Let me know if you have any problems building it.-Bruce.
Henrik W Maier wrote:
Hi!
I am wondering if anybody has ported Tcl/Tk and Tcl-DP for QNX4 and
Photon.Kind Regards,
Henrik W. Maier
Senior Software Engineer
Henrik W. Maier Diplom-Ingenieur (Professional Engineer)
Powercorp Pty Ltd
3406 Export Drive
Trade Development Zone
Northern Territory 0822 Australia
Tel: +61 (0)8 8947 0933
Fax: +61 (0)8 8947 0925
Email: > henrik@pcorp.com.au
Web Site: > www.pcorp.com.au
My own e-mail address: jarob@atlas.cz
E-mail of firm: info@sae-control.sk (this way is faster, but in the
‘subject’ place write ‘BELLAN’).
Thanks
Jaro.
“Bruce Edge” <bedge@sattel.com> wrote in message
news:3994192B.4DB249A@sattel.com…
Anyone have an FTP site I can put binaries on?
If not, I can mail them to anyone who’s interested.-Bruce.
Jaro Bellan wrote:
Is there any possibility how to obtain binaries of TCL/Tk 8.4 or
modified
sources for QNX ? I have potred version 8.0, but attempt to port version
8.4
wasn’t successful.Jaro.
“Bruce Edge” <> bedge@sattel.com> > wrote in message
news:> 3992C984.C7D545E9@sattel.com> …
The latest, 8.4 works great on QNX.
There’s a couple of minor nits in getting it built still, but it’s a
very
usable package.
I’ve been using it for about 6 months now with good results.
The tuba debugger works on QNX, and, if you have TclPro for some other
platform, you can use it to remotely debug TCL apps on QNX.
Let me know if you have any problems building it.-Bruce.
Henrik W Maier wrote:
Hi!
I am wondering if anybody has ported Tcl/Tk and Tcl-DP for QNX4 and
Photon.Kind Regards,
Henrik W. Maier
Senior Software Engineer
Henrik W. Maier Diplom-Ingenieur (Professional Engineer)
Powercorp Pty Ltd
3406 Export Drive
Trade Development Zone
Northern Territory 0822 Australia
Tel: +61 (0)8 8947 0933
Fax: +61 (0)8 8947 0925
Email: > henrik@pcorp.com.au
Web Site: > www.pcorp.com.au
In article <39921A6D.D7F4E269@pcorp.com.au>,
Henrik W Maier <henrik@pcorp.com.au> wrote:
Hi!
I am wondering if anybody has ported Tcl/Tk and Tcl-DP for QNX4 and
Photon.
Tcl/Tk has been ported a number of times to qnx 4, but for X11 and
not for Photon.
–
http://www.math.fsu.edu/~bellenot
bellenot math.fsu.edu
+1.850.644.7189 (4053fax)
The latest, 8.4 works great on QNX.
There’s a couple of minor nits in getting it built still, but it’s a very
usable package.
I’ve been using it for about 6 months now with good results.
The tuba debugger works on QNX, and, if you have TclPro for some other
platform, you can use it to remotely debug TCL apps on QNX.
Let me know if you have any problems building it.
-Bruce.
Henrik W Maier wrote:
Hi!
I am wondering if anybody has ported Tcl/Tk and Tcl-DP for QNX4 and
Photon.Kind Regards,
Henrik W. Maier
Senior Software Engineer
Henrik W. Maier Diplom-Ingenieur (Professional Engineer)
Powercorp Pty Ltd
3406 Export Drive
Trade Development Zone
Northern Territory 0822 Australia
Tel: +61 (0)8 8947 0933
Fax: +61 (0)8 8947 0925
Email: > henrik@pcorp.com.au
Web Site: > www.pcorp.com.au
Anyone have an FTP site I can put binaries on?
If not, I can mail them to anyone who’s interested.
-Bruce.
Jaro Bellan wrote:
Is there any possibility how to obtain binaries of TCL/Tk 8.4 or modified
sources for QNX ? I have potred version 8.0, but attempt to port version 8.4
wasn’t successful.Jaro.
“Bruce Edge” <> bedge@sattel.com> > wrote in message
news:> 3992C984.C7D545E9@sattel.com> …
The latest, 8.4 works great on QNX.
There’s a couple of minor nits in getting it built still, but it’s a very
usable package.
I’ve been using it for about 6 months now with good results.
The tuba debugger works on QNX, and, if you have TclPro for some other
platform, you can use it to remotely debug TCL apps on QNX.
Let me know if you have any problems building it.-Bruce.
Henrik W Maier wrote:
Hi!
I am wondering if anybody has ported Tcl/Tk and Tcl-DP for QNX4 and
Photon.Kind Regards,
Henrik W. Maier
Senior Software Engineer
Henrik W. Maier Diplom-Ingenieur (Professional Engineer)
Powercorp Pty Ltd
3406 Export Drive
Trade Development Zone
Northern Territory 0822 Australia
Tel: +61 (0)8 8947 0933
Fax: +61 (0)8 8947 0925
Email: > henrik@pcorp.com.au
Web Site: > www.pcorp.com.au
I’d like to get them too, Bruce. Do you know if you you can email me yet?
Thanks,
Marty Doane
doanemr@rapistan.com
“Bruce Edge” <bedge@sattel.com> wrote in message
news:3994192B.4DB249A@sattel.com…
Anyone have an FTP site I can put binaries on?
If not, I can mail them to anyone who’s interested.-Bruce.
Jaro Bellan wrote:
Is there any possibility how to obtain binaries of TCL/Tk 8.4 or
modified
sources for QNX ? I have potred version 8.0, but attempt to port version
8.4
wasn’t successful.Jaro.
“Bruce Edge” <> bedge@sattel.com> > wrote in message
news:> 3992C984.C7D545E9@sattel.com> …
The latest, 8.4 works great on QNX.
There’s a couple of minor nits in getting it built still, but it’s a
very
usable package.
I’ve been using it for about 6 months now with good results.
The tuba debugger works on QNX, and, if you have TclPro for some other
platform, you can use it to remotely debug TCL apps on QNX.
Let me know if you have any problems building it.-Bruce.
Henrik W Maier wrote:
Hi!
I am wondering if anybody has ported Tcl/Tk and Tcl-DP for QNX4 and
Photon.Kind Regards,
Henrik W. Maier
Senior Software Engineer
Henrik W. Maier Diplom-Ingenieur (Professional Engineer)
Powercorp Pty Ltd
3406 Export Drive
Trade Development Zone
Northern Territory 0822 Australia
Tel: +61 (0)8 8947 0933
Fax: +61 (0)8 8947 0925
Email: > henrik@pcorp.com.au
Web Site: > www.pcorp.com.au