Matrox G400 , Voodoo 3 , Banshee , or ? ...

QNX Newsgroups (Archives) comp.os.qnx
1

Hi .

I want to buy some of these cards :

  • Matrox G400
  • Voodoo 3 (1000,2000 )
  • Voodoo Velocity 100
  • Voodoo Banshee

I need support for refresh rate , 1024X768 , 16bit colors …
Hope that someone could help me with advice .

Kind regards ,
Nikola Popovic

P.S.

I have QNX 4.24 and Photon 1.13 ,

2

On Mon, 7 Aug 2000 16:42:04 +0200, “Nikola Popovic” <pnikola@ptt.yu>
wrote:

Nikola,

I would suggest the Voodoo 3 2000 or 3000, but that would require
photon 1.14.

We’ve standardized on this board because the QNX photon 1.14 driver
supports high resolutions and refresh rates (eg 1600x1200 16 bit 72Hz)
and also because under the QNX RTP, hardware 3d acceleration is
supported (through OpenGL and Glide) for these boards.

You should be able to get a v3 2000 for about $80 and a v3 3000 for
about $110.

Hi .

I want to buy some of these cards :

  • Matrox G400
  • Voodoo 3 (1000,2000 )
  • Voodoo Velocity 100
  • Voodoo Banshee

I need support for refresh rate , 1024X768 , 16bit colors …
Hope that someone could help me with advice .

Kind regards ,
Nikola Popovic

P.S.

I have QNX 4.24 and Photon 1.13 ,