Dual monitor setup

QNX Newsgroups (Archives) comp.os.qnx
1

Hi,

does anybody know if the Voodoo 3 2000 or 3000 works for dual monitor setup ?
What about accel. mode ?
Any driver vor accel. mode available other then the Bannshee-card ?
Bannshee-card is outdatet and not in stock anymore.

Thanks

J. Bremer

2

JrgBremer <jrgbremer@aol.com> wrote:

does anybody know if the Voodoo 3 2000 or 3000 works for dual monitor setup ?

I run two Voodoo3 2000’s, One AGP and the other PCI with dual monitors.
The setup is manual, and a little tricky. The Configure display
program ceases to be useful.

What about accel. mode ?

Same as for single card.

\

Mitchell Schoenbrun --------- maschoen@pobox.com

3

On Thu, 10 Aug 2000 22:12:08 GMT, Mitchell Schoenbrun
<maschoen@tsoft.com> wrote:

I run two Voodoo3 2000’s, One AGP and the other PCI with dual monitors.
The setup is manual, and a little tricky. The Configure display
program ceases to be useful.

Do post your trap file entry please! :slight_smile:

4

Nicolae P. Costescu <nick@qrts.com> wrote:

On Thu, 10 Aug 2000 22:12:08 GMT, Mitchell Schoenbrun
maschoen@tsoft.com> > wrote:

I run two Voodoo3 2000’s, One AGP and the other PCI with dual monitors.
The setup is manual, and a little tricky. The Configure display
program ceases to be useful.

Do post your trap file entry please! > :slight_smile:

Do post your trap file entry please! > :slight_smile:

–
Mitchell Schoenbrun --------- maschoen@pobox.com

Nic,

This is the first line, which of course is the only one that matters.
The parameters of interest are -g and -o. Of course you might have to switch
the -I0 and -I1 depending on placement.

Null.ms;Pg.Banshee -HNqnx/crt -g1280x1024x32
-I0 -d0x121A,0x0005 -WB5120 -WV0x01000000;
Pg.Banshee -o1280 -HNqnx/crt -g1024x768x32
-I1 -d0x121A,0x0005 -WB4096 -WV0x01000000;
#1024,768,32,300,1rCB,Banshee - 3Dfx Voodoo Banshee

Mitchell


\

Mitchell Schoenbrun --------- maschoen@pobox.com