Hi, I have a question, I get "Unknown Flash when I try to install QNX
(4.23) in a Celeron machine. Would this be a problem with
incompatability with celerons or something else?
Thanks Jimmy
“Unknown Flash” ???
Where do you see this? At what point in the installation?
QNX works fine on Celeron. Look somewhere else.
“Jimmy” <mcs1957@hotmail.com> wrote in message
news:39A80F92.ADA6ABC3@hotmail.com…
Hi, I have a question, I get "Unknown Flash when I try to install QNX
(4.23) in a Celeron machine. Would this be a problem with
incompatability with celerons or something else?
Thanks Jimmy
IBM DOS???
Can’t be. Are you sure you disk is OK.
What kind of machine is this? What type of
installation are you trying to do? Does the
machine has a FLASH or DOC (DiskOnChip)?
“Jimmy” <mcs1957@hotmail.com> wrote in message
news:39A82D1B.B998F06@hotmail.com…
Thanks for replying,
I get it when I put in the installation boot disk, it does all the usual
stuff then goes to boot using the floppy, it says unknown flash then
boots to ibm dos.Mario Charest wrote:
“Unknown Flash” ???
Where do you see this? At what point in the installation?
QNX works fine on Celeron. Look somewhere else.
“Jimmy” <> mcs1957@hotmail.com> > wrote in message
news:> 39A80F92.ADA6ABC3@hotmail.com> …
Hi, I have a question, I get "Unknown Flash when I try to install QNX
(4.23) in a Celeron machine. Would this be a problem with
incompatability with celerons or something else?
Thanks Jimmy
Thanks for replying,
I get it when I put in the installation boot disk, it does all the usual
stuff then goes to boot using the floppy, it says unknown flash then
boots to ibm dos.
Mario Charest wrote:
“Unknown Flash” ???
Where do you see this? At what point in the installation?
QNX works fine on Celeron. Look somewhere else.
“Jimmy” <> mcs1957@hotmail.com> > wrote in message
news:> 39A80F92.ADA6ABC3@hotmail.com> …
Hi, I have a question, I get "Unknown Flash when I try to install QNX
(4.23) in a Celeron machine. Would this be a problem with
incompatability with celerons or something else?
Thanks Jimmy
This problem has been solved but not yet release.
Problem is not specify to Celeron.
“Alex Yakovlev” <versy59@chat.ru> wrote in message
news:8ofsaa$5c0$1@inn.qnx.com…
Hi, I have a question, I get "Unknown Flash when I try to install QNX
(4.23) in a Celeron machine. Would this be a problem with
incompatability with celerons or something else?
Thanks Jimmy
Qnx work fine on Celeron, but may be HIGH SPEED problem.
I have Cel660 and have one problem:
Dev.par crashed.
But I recompile Dev.par32 from /free and It work fine !
Hi, I have a question, I get "Unknown Flash when I try to install QNX
(4.23) in a Celeron machine. Would this be a problem with
incompatability with celerons or something else?
Thanks Jimmy
Qnx work fine on Celeron, but may be HIGH SPEED problem.
I have Cel660 and have one problem:
Dev.par crashed.
But I recompile Dev.par32 from /free and It work fine !