QNX did not configure my modem or my sound card
I got the modem working manually but dont know the flags for my audio to work
it is sb compatible
and here is what pci -v outputed
Class = Multimedia (Audio)
Vendor ID = 4005h, Avance Logic Inc.
Device ID = 300h, Unknown Unknown
PCI index = 0h
Class Codes = 040100h
Revision ID = 0h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 200h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 50h
Cache Line Size= 0h
IO Address = e400h length 16 enabled
Mem Address = ea000000h 32bit length 2097152 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 7
what exactly do i have to put to start manually the audio server?
QNX did not configure my modem or my sound card
I got the modem working manually but dont know the flags for my audio to work
it is sb compatible
and here is what pci -v outputed
Class = Multimedia (Audio)
Vendor ID = 4005h, Avance Logic Inc.
Device ID = 300h, Unknown Unknown
PCI index = 0h
Class Codes = 040100h
Revision ID = 0h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 200h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 50h
Cache Line Size= 0h
IO Address = e400h length 16 enabled
Mem Address = ea000000h 32bit length 2097152 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 7
what exactly do i have to put to start manually the audio server?
Please post audio issues under ‘SBlaster 16 problem or bug’
Thanks,
and here is what pci -v outputed
Class = Multimedia (Audio)
Vendor ID = 4005h, Avance Logic Inc.
Device ID = 300h, Unknown Unknown
PCI index = 0h
Class Codes = 040100h
Revision ID = 0h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 200h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 50h
Cache Line Size= 0h
IO Address = e400h length 16 enabled
Mem Address = ea000000h 32bit length 2097152 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 7
what exactly do i have to put to start manually the audio server?
Please post audio issues under ‘SBlaster 16 problem or bug’