When I start QNX for the first time after the Install, devg-tnt.so is loaded
but the load fails with a “Alloc mem failed” and then falls back to Vesa Mode.
The video card in question is a Hercules (Guillemot) 3D Prophet DDR-DVI
(nVidia GeForce with 32mb RAM)
Bus 1, device 0, function 0:
VGA compatible controller: NVidia Unknown device (rev 16).
Vendor id=10de. Device id=101.
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. !Latency=64. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe9000000 [0xe9000000].
Prefetchable 32 bit memory at 0xf0000000 [0xf0000008].
The computer is a Pentium III 450MHz with 128MB RAM.
When I start QNX for the first time after the Install, devg-tnt.so is
loaded
but the load fails with a “Alloc mem failed” and then falls back to Vesa
Mode.
The video card in question is a Hercules (Guillemot) 3D Prophet DDR-DVI
(nVidia GeForce with 32mb RAM)
Bus 1, device 0, function 0:
VGA compatible controller: NVidia Unknown device (rev 16).
Vendor id=10de. Device id=101.
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable.
!Latency=64. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe9000000 [0xe9000000].
Prefetchable 32 bit memory at 0xf0000000 [0xf0000008].
The computer is a Pentium III 450MHz with 128MB RAM.
When I start QNX for the first time after the Install, devg-tnt.so is
loaded
but the load fails with a “Alloc mem failed” and then falls back to Vesa
Mode.
The video card in question is a Hercules (Guillemot) 3D Prophet DDR-DVI
(nVidia GeForce with 32mb RAM)
Bus 1, device 0, function 0:
VGA compatible controller: NVidia Unknown device (rev 16).
Vendor id=10de. Device id=101.
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable.
!Latency=64. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe9000000 [0xe9000000].
Prefetchable 32 bit memory at 0xf0000000 [0xf0000008].
The computer is a Pentium III 450MHz with 128MB RAM.
–
“Computers are like air conditioners :
They stop working properly when you open Windows” relnev@themail.com> > a écrit dans le message :
VgbB5.23284$> WK6.404750@typhoon.austin.rr.com> …
When I start QNX for the first time after the Install, devg-tnt.so is
loaded
but the load fails with a “Alloc mem failed” and then falls back to Vesa
Mode.
The video card in question is a Hercules (Guillemot) 3D Prophet DDR-DVI
(nVidia GeForce with 32mb RAM)
Bus 1, device 0, function 0:
VGA compatible controller: NVidia Unknown device (rev 16).
Vendor id=10de. Device id=101.
Medium devsel. Fast back-to-back capable. IRQ 11. Master
Capable.
!Latency=64. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe9000000 [0xe9000000].
Prefetchable 32 bit memory at 0xf0000000 [0xf0000008].
The computer is a Pentium III 450MHz with 128MB RAM.
But not on everyones machine. Depending on the system, some people
run into the problem described below. It is being worked on…
(Some people with 3dfx adapters have also experienced this problem,
it is not specific to any graphics card).
–
“Computers are like air conditioners :
They stop working properly when you open Windows” relnev@themail.com> > a ecrit dans le message :
VgbB5.23284$> WK6.404750@typhoon.austin.rr.com> …
When I start QNX for the first time after the Install, devg-tnt.so is
loaded
but the load fails with a “Alloc mem failed” and then falls back to Vesa
Mode.
The video card in question is a Hercules (Guillemot) 3D Prophet DDR-DVI
(nVidia GeForce with 32mb RAM)
Bus 1, device 0, function 0:
VGA compatible controller: NVidia Unknown device (rev 16).
Vendor id=10de. Device id=101.
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable.
!Latency=64. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe9000000 [0xe9000000].
Prefetchable 32 bit memory at 0xf0000000 [0xf0000008].
The computer is a Pentium III 450MHz with 128MB RAM.