Hi,
when I boot to the QNX-GUI, the refreshrate is inacceptable low (60Hz).
QNX identified my graphics-adapter during installation, the driver seems
to be the right one (mga100). It let me choos a refreshrate (60, 70, 75,
80 Hz). Tried them all, but it keeps doing 60 Hz.
Any suggestions?
Bye,
Robert
“Robert Gummi” <smachaga@sp.zrz.tu-berlin.de> wrote in message
news:39D9AAEC.ABB3E7F4@sp.zrz.tu-berlin.de…
Hi,
when I boot to the QNX-GUI, the refreshrate is inacceptable low (60Hz).
QNX identified my graphics-adapter during installation, the driver seems
to be the right one (mga100). It let me choos a refreshrate (60, 70, 75,
80 Hz). Tried them all, but it keeps doing 60 Hz.
After a new refresh rate has been tried, either successfully or not, you
have to set the new refresh rate AGAIN before choosing ‘done’.