I’ve bought a s3 Trio64V2-DX/GX card (PCI). I’ve got another video card
integrated to my mother board. My screen is connected to my s3.
But when I launch QNX, cttrap seems to detected my s3trio, and launch the
video mode. But my screen stay black ! I’ve try to re-install QNX, but it
doesn’t work.
Well the first thing is to try to disable the
motherboard video in your bios setup.
Previously, Damien wrote in comp.os.qnx:
Hi !
I’ve bought a s3 Trio64V2-DX/GX card (PCI). I’ve got another video card
integrated to my mother board. My screen is connected to my s3.
But when I launch QNX, cttrap seems to detected my s3trio, and launch the
video mode. But my screen stay black ! I’ve try to re-install QNX, but it
doesn’t work.
Well the first thing is to try to disable the
motherboard video in your bios setup.
Previously, Damien wrote in comp.os.qnx:
Hi !
I’ve bought a s3 Trio64V2-DX/GX card (PCI). I’ve got another video card
integrated to my mother board. My screen is connected to my s3.
But when I launch QNX, cttrap seems to detected my s3trio, and launch
the
video mode. But my screen stay black ! I’ve try to re-install QNX, but
it
doesn’t work.
Hi, Assuming that your motherboard’s graphics chips is not in the S3 family,
you can unambiguously force crrtrap to detect the S3 video card in preference
to all others by running:
I’ve bought a s3 Trio64V2-DX/GX card (PCI). I’ve got another video card
integrated to my mother board. My screen is connected to my s3.
But when I launch QNX, cttrap seems to detected my s3trio, and launch
the
video mode. But my screen stay black ! I’ve try to re-install QNX, but
it
doesn’t work.
Hi, Assuming that your motherboard’s graphics chips is not in the S3
family,
you can unambiguously force crrtrap to detect the S3 video card in
preference
to all others by running:
I’ve bought a s3 Trio64V2-DX/GX card (PCI). I’ve got another video
card
integrated to my mother board. My screen is connected to my s3.
But when I launch QNX, cttrap seems to detected my s3trio, and
launch
the
video mode. But my screen stay black ! I’ve try to re-install QNX,
but
it
doesn’t work.
Hi,
Sorry I forgot to include the vital command ‘trap’
try
crttrap -F s3 trap
Like I said, I’m not an expert…
All the documentation for crttrap appears in the photon online help.
But if you can’t run photon, you can’t display the help!
Within a shell you can type
use
to discover the command line options of any particular executable.
Hope this helps.
I’ve bought a s3 Trio64V2-DX/GX card (PCI). I’ve got another video card
integrated to my mother board. My screen is connected to my s3.
But when I launch QNX, cttrap seems to detected my s3trio, and launch
the
video mode. But my screen stay black ! I’ve try to re-install QNX, but
it
doesn’t work.
I can’t set up the motherboard VGA. There is nothing to do that…
You mean that you can’t plug a VGA card into the motherboard
VGA port? When you boot, are you in text mode on your other
card? If so, here is one more shot.
Run: “crttrap trap”. Edit the /etc/config/trap/crt.XXX file.
Look for a driver listed that is not the motherboard VGA.
Move this line to the top of the file. Then try starting
Photon.