When com a new qnx when it support NE2000 compatibel net ca

Linux Windows3.1/95/98/NT OS/2 Unix DOS BeOS NewDeal and all other OS
can use this net card but QNX can not use Ne2000 ISA


BN

this is simply not true. QNX 4 supports many kinds of NE2000 compatible
ISA-Cards. and also Neutrino
2.0 has a good NE2000 resource manager for an ISA ethernet card (I am
using it on a very old
486 system under Nto). When you mean something different, please make
your statements more specific
and precise.

Bent Nielsen schrieb:

Linux Windows3.1/95/98/NT OS/2 Unix DOS BeOS NewDeal and all other OS
can use this net card but QNX can not use Ne2000 ISA

BN

Joerg Kampmann
IBK-Consult - (embedded Systems)
WWW: http://www.ibk-consult.de

I use an isa ne2000 card with no problems.
slay the io-net driver and restart it with the options:
io-net -pttcpip -dne2000

“Bent Nielsen” <postmaster@x2000.dk> wrote in message
news:39E0BD08.B5066BB3@x2000.dk

Linux Windows3.1/95/98/NT OS/2 Unix DOS BeOS NewDeal and all other OS
can use this net card but QNX can not use Ne2000 ISA


BN

Kieran Tyrrell skrev:

I use an isa ne2000 card with no problems.
slay the io-net driver and restart it with the options:
io-net -pttcpip -dne2000

Tanks it works, but after reboot the net card is not on when the qnx
start and the setup is not more
Can you help to get back after reboot??

I have troble to use my PS printer The ERROR
OFFENDING COMMAND: setpagedevice
ERRORINFO: Key= – nostringval-- Value=nostringval –

STACK:

dicttype


The printer Lexmark Optra Color 40


Bent Nielsen
Denmark

Jörg Kampmann skrev:

this is simply not true. QNX 4 supports many kinds of NE2000 compatible
ISA-Cards. and also Neutrino
2.0 has a good NE2000 resource manager for an ISA ethernet card (I am
using it on a very old
486 system under Nto). When you mean something different, please make
your statements more specific
and precise.

I write bad english, but I try.
I get downlaod the qnxrtp.iso.
Make a cdrom.
Install it on 3 PC all have a ISA NE2000 RTL8019AS chips on
The new install can`t see the device.
Then I pluk in a other PCI NE2000 RTL8029AS chips on
When I boot the qmx can now see 2 net card and I can set up tcp and use
ISA card 192.168.0.60 and PCI card 192.168.0.80 and use the card.
It works after reboot to.
I pluk the PCI out and when the QNX boot there is no device on the GDI.
Then I try the setup Kieran Tyrrel write.
io-net -pttcpip -dne2000 and the device is on the GDI setup-
I setup the tcp dns and it run.
After reboot the decice is not more.

Can I get the ne2000 to run??