When I print it print blank pages
I try phs-to-pcl and then send page stil blank
try from dos copy /b file.pcl prn still blank
preview works fine
On Fri, 8 Dec 2000 19:25:41 +0100, “Marko Srepfler” <marko@jware.net>
wrote:
When I print it print blank pages
I try phs-to-pcl and then send page stil blank
try from dos copy /b file.pcl prn still blank
preview works fineUnder QNX4 and Photon the Pp.pcl filter works fine, the setting
is the following:
[HP Laserjet]
Filter = Pp.pcl
Device = /dev/spool/pcl.phs
Location = HP 1100A
Properties = prprops
Preview = preview
NonPrintable = 500
Supported Resolution = 75,150,300,600
Supported PaperSize = 8500x11000:Letter,8500x14000:Legal
Supported Color = 0:B&W,2:Color
Supported Dithering = 5:ErrorDiffussion,6:HalfTone
Supported Orientation = 0:Portrait,1:Landscape
Supported Intensity = 100
Supported InkType = 1:B&W
Resolution = 300
PaperSize = 8500x11000
Color = 1
Dithering = 5
Orientation = 0
Intensity = 50
InkType = 1
\
| | | | | |_ |_ || || |
|| || |_ | | | | | | |_
Jozsef Pal, Ph.D.El.Eng. Voice: +36 1 457-82-26
VEIKI Research Institute Fax: +36 1 457-82-28
Division for Control Engineering Mobil: +36 30 960-69-23
H-1251 Budapest, P.O.B. 80. Email: j.pal@veiki.hu
HUNGARY Web: http://www.veiki.hu