On Thu, 21 Dec 2000 11:10:53 -0800, user <@jpl.nasa.gov> wrote:
[…] Better yet, does anyone know if a QNX4 driver has been written
for the PX610? Or even the PX500 series?
do you know which framegrabber chip Imagenation uses on that board? We
have a driver for Brooktree Bt848 based cards under QNX4. If they use
a variant of that chip, our driver should work with the card.
There exists a QNX 4 driver for the Imagenation PXC200 frame grabber.
Imagenation did not write it. Does anyone know of the person who did?
I need to write a driver for the PX610 frame grabber and it would help
me to have access to the QNX4 source for the PXC200 driver. Imagenation
does not currently support the PX610 for QNX.
Better yet, does anyone know if a QNX4 driver has been written for the
PX610? Or even the PX500 series?
I wrote a QNX4 drivers for the PX610 and more recently for the PX610A, using
sources and informations given by Imagenation under NDA. I send them the
sources of both versions. I am working with QNX 4.25D.
Contact Imagenation and ask them the PX610 development kit (with NDA). Then I
shall ask if they allow me to send you the sources.
The PX610 (no longer sold) and PX610A are using a different PCI chip. It makes
the drivers quite different.
The PX610A (monochrome) and PXC200 (color) are completely different cards.
Arnaud Delmas e-mail: firstname.lastname@example.org
CEA - CEREM
Centre de Saclay, STA/LMS Bat. 611
F-91191 GIF SUR YVETTE CEDEX, FRANCE
Ph.: +33 1 69 08 48 96 Fax: +33 1 69 08 75 97