Is there a solution for MODBUS/TCP protocol available for the QNX
RTP?
Likewise, for Profibus?
–
Jeff Maass jmaass@columbus.rr.com Located near Columbus Ohio
USPSA # L-1192 NROI/CRO Amateur Radio K8ND
Maass’ IPSC Resources Page: http://home.columbus.rr.com/jmaass
Jeff Maass wrote:
Is there a solution for MODBUS/TCP protocol available for the QNX
RTP?
Likewise, for Profibus?
PROFIBUS is available for Neutrino (QNX6, RTP, …).
Hardware formats: PC/104, ISA, PCI, cPCI
Do you need FMS or DP ?
For more information just drop me an email to
js@steinhoff-automation.com
Jutta
Let me add something …
Jutta Steinhoff wrote:
Jeff Maass wrote:
Is there a solution for MODBUS/TCP protocol available for the QNX
RTP?
There are sources available for MODBUS/TCP at
http://www.modicon.com/openmbus/
A modbus protocol spec is available at
http://www.modicon.com/techpubs/intr7.html
Likewise, for Profibus?
PROFIBUS is available for Neutrino (QNX6, RTP, …).
Hardware formats: PC/104, ISA, PCI, cPCI
Do you need FMS or DP ?
For our fieldbus independent application interface have a look at:
http://www.steinhoff.de/process-image.htm
Notice, we don’t use DMA with PCI boards (from leading vendors),
what means there are no negative impacts for the real-time behavior
of the rest of the system.
Our PROFIBUS solution allows small cycle times in the range of
200-1000us and our Photon based DACHS-PROFIBUS-CMD (Configuration-,
Management- & Diagnosis Tool) allows configuration throughout the
network.
Armin
Has someone connected to the WAGO Fieldbus via TCP/IP? We’re looking at
a project
that would be a perfect match. I have a demo sales guy from WAGO comming
in soon, I
just want to be prepared to ask him some serious questions…
What programming would I expect? Simple connections via LAN, or do I
need to define
a DHCP for the IP addresses? Am I asking the impossible? Can I simply
open a port
and query?
Thanks in advance
~ Jeff
Armin Steinhoff wrote:
Let me add something …
Jutta Steinhoff wrote:
Jeff Maass wrote:
Is there a solution for MODBUS/TCP protocol available for the QNX
RTP?
There are sources available for MODBUS/TCP at
http://www.modicon.com/openmbus/
A modbus protocol spec is available at
http://www.modicon.com/techpubs/intr7.html
Likewise, for Profibus?
PROFIBUS is available for Neutrino (QNX6, RTP, …).
Hardware formats: PC/104, ISA, PCI, cPCI
Do you need FMS or DP ?
For our fieldbus independent application interface have a look at:
http://www.steinhoff.de/process-image.htm
Notice, we don’t use DMA with PCI boards (from leading vendors),
what means there are no negative impacts for the real-time behavior
of the rest of the system.
Our PROFIBUS solution allows small cycle times in the range of
200-1000us and our Photon based DACHS-PROFIBUS-CMD (Configuration-,
Management- & Diagnosis Tool) allows configuration throughout the
network.
Armin