compile tcsh on QNX

QNX Newsgroups (Archives) comp.os.qnx
1

I tried to compile tcsh on QNX and encountered some problems. I also
sent an email
earlier asked if any one has done it before. Unfortunately did not get
any response.
The problem I am running into was in sh.exe.c, tw.init.c and tc.os.c the
‘d_stat’ was not
defined if the TARGET is QNX. I downloaded the tcsh-6.04 src from qnx
contributed
software section.


Does anyone have any comments, suggestions?

Thanks in advance.

–
Gerald Li
Fresher Information Corp
415.536.5373, fresher.com

2

Gerald LI wrote:

I tried to compile tcsh on QNX and encountered some problems. I also
sent an email
earlier asked if any one has done it before. Unfortunately did not get
any response.
The problem I am running into was in sh.exe.c, tw.init.c and tc.os.c the
‘d_stat’ was not
defined if the TARGET is QNX. I downloaded the tcsh-6.04 src from qnx
contributed software section.

The version 6.04 is more than outdated =8-/

You can download a precompiled 8.3 version from
http://www.sf.net/projects/pyqnx

Armin


Does anyone have any comments, suggestions?

Thanks in advance.

–
Gerald Li
Fresher Information Corp
415.536.5373, fresher.com

3

Gerald,
when you say QNX, do you mean qnx4 or qnx6?
Armin,
the latest version of tcsh is 6.11 (based on http://www.tcsh.org),
you are probably thinking of tk/tcl??

Armin Steinhoff <a-steinhoff@web_.de> wrote:

Gerald LI wrote:

I tried to compile tcsh on QNX and encountered some problems. I also
sent an email
earlier asked if any one has done it before. Unfortunately did not get
any response.
The problem I am running into was in sh.exe.c, tw.init.c and tc.os.c the
‘d_stat’ was not
defined if the TARGET is QNX. I downloaded the tcsh-6.04 src from qnx
contributed software section.

The version 6.04 is more than outdated =8-/

You can download a precompiled 8.3 version from
http://www.sf.net/projects/pyqnx

Armin


Does anyone have any comments, suggestions?

Thanks in advance.

–
Gerald Li
Fresher Information Corp
415.536.5373, fresher.com

–

My public key can be found at
http://mama.indstate.edu/users/liug/key.txt

4

LiuG wrote:

Gerald,
when you say QNX, do you mean qnx4 or qnx6?
Armin,
the latest version of tcsh is 6.11 (based on > http://www.tcsh.org> ),
you are probably thinking of tk/tcl??

Yes … you are right :slight_smile: … I did in the meantime a quick hack with
tcsh.
It’s now available at projects/openqnx.

Armin

Armin Steinhoff <a-steinhoff@web_.de> wrote:
Gerald LI wrote:

I tried to compile tcsh on QNX and encountered some problems. I also
sent an email
earlier asked if any one has done it before. Unfortunately did not get
any response.
The problem I am running into was in sh.exe.c, tw.init.c and tc.os.c the
‘d_stat’ was not
defined if the TARGET is QNX. I downloaded the tcsh-6.04 src from qnx
contributed software section.

The version 6.04 is more than outdated =8-/

You can download a precompiled 8.3 version from
http://www.sf.net/projects/pyqnx

Armin


Does anyone have any comments, suggestions?

Thanks in advance.

–
Gerald Li
Fresher Information Corp
415.536.5373, fresher.com

–

My public key can be found at
http://mama.indstate.edu/users/liug/key.txt