Little help please…
I have been using QNX 4.24 and 4.25 together for some time on several
machines connected via wireless serial modem (ie - for research in small
flying craft with computers onboard). New systems are coming into use here.
Can QNX 6.1 be networked transparently via QNX protocols to a QNX 4.24 node
as you could between nodes in QNX 4 (ie - equivalent to old style node
listing in /etc/config/netmap under QNX4, but instead between QNX6 and
QNX4).
-Ryan Eubank
QNX 6 does not use QNX4 native networking.
If your QNX4 apps use or can use TCP/IP then your OK.
“Ryan Eubank” <eubankrd@wam.umd.edu> wrote in message
news:agfp4s$14h$1@inn.qnx.com…
Little help please…
I have been using QNX 4.24 and 4.25 together for some time on several
machines connected via wireless serial modem (ie - for research in small
flying craft with computers onboard). New systems are coming into use
here.
Can QNX 6.1 be networked transparently via QNX protocols to a QNX 4.24
node
as you could between nodes in QNX 4 (ie - equivalent to old style node
listing in /etc/config/netmap under QNX4, but instead between QNX6 and
QNX4).-Ryan Eubank
“Bill Caroselli (Q-TPS)” wrote:
QNX 6 does not use QNX4 native networking.
If your QNX4 apps use or can use TCP/IP then your OK.
Or use simply PVM! It’s available at http://www.sf.net/projects/openqnx/
…
If you need a distributed file system between QNX4 and QNX6 … try to
port
PIOUS → http://www.mathcs.emory.edu/pious (still on my to-do list …)
Armin
“Ryan Eubank” <> eubankrd@wam.umd.edu> > wrote in message
news:agfp4s$14h$> 1@inn.qnx.com> …
Little help please…
I have been using QNX 4.24 and 4.25 together for some time on several
machines connected via wireless serial modem (ie - for research in small
flying craft with computers onboard). New systems are coming into use
here.
Can QNX 6.1 be networked transparently via QNX protocols to a QNX 4.24
node
as you could between nodes in QNX 4 (ie - equivalent to old style node
listing in /etc/config/netmap under QNX4, but instead between QNX6 and
QNX4).-Ryan Eubank
Armin Steinhoff wrote:
“Bill Caroselli (Q-TPS)” wrote:
QNX 6 does not use QNX4 native networking.
If your QNX4 apps use or can use TCP/IP then your OK.
Or use simply PVM! It’s available at > http://www.sf.net/projects/openqnx/
…If you need a distributed file system between QNX4 and QNX6 … try to
port
PIOUS → > http://www.mathcs.emory.edu/pious > (still on my to-do list …)
It’s now available at http://www.sf.net/projects/openqnx/ 
Armin
Armin
“Ryan Eubank” <> eubankrd@wam.umd.edu> > wrote in message
news:agfp4s$14h$> 1@inn.qnx.com> …
Little help please…
I have been using QNX 4.24 and 4.25 together for some time on several
machines connected via wireless serial modem (ie - for research in small
flying craft with computers onboard). New systems are coming into use
here.
Can QNX 6.1 be networked transparently via QNX protocols to a QNX 4.24
node
as you could between nodes in QNX 4 (ie - equivalent to old style node
listing in /etc/config/netmap under QNX4, but instead between QNX6 and
QNX4).-Ryan Eubank
hello sir,
where qnx 4.24 uses fleet networking native protocol & your qnx 6.1 uses
qnet native networking protocol both are from the same family. It should
work. pls check for the necessary things.
“Ryan Eubank” <eubankrd@wam.umd.edu> wrote in message
news:agfp4s$14h$1@inn.qnx.com…
Little help please…
I have been using QNX 4.24 and 4.25 together for some time on several
machines connected via wireless serial modem (ie - for research in small
flying craft with computers onboard). New systems are coming into use
here.
Can QNX 6.1 be networked transparently via QNX protocols to a QNX 4.24
node
as you could between nodes in QNX 4 (ie - equivalent to old style node
listing in /etc/config/netmap under QNX4, but instead between QNX6 and
QNX4).-Ryan Eubank
“sridhar” <sridharbin@hotmail.com> wrote in message
news:ak518h$ctu$2@inn.qnx.com…
hello sir,
where qnx 4.24 uses fleet networking native protocol & your qnx 6.1 uses
qnet native networking protocol both are from the same family. It should
work. pls check for the necessary things.
No it does not. Both are totaly incompatible
“Ryan Eubank” <> eubankrd@wam.umd.edu> > wrote in message
news:agfp4s$14h$> 1@inn.qnx.com> …
Little help please…
I have been using QNX 4.24 and 4.25 together for some time on several
machines connected via wireless serial modem (ie - for research in small
flying craft with computers onboard). New systems are coming into use
here.
Can QNX 6.1 be networked transparently via QNX protocols to a QNX 4.24
node
as you could between nodes in QNX 4 (ie - equivalent to old style node
listing in /etc/config/netmap under QNX4, but instead between QNX6 and
QNX4).-Ryan Eubank
\