It looks like I’ll have to write my own for these DAQ and counter-timer
cards. I have the memory maps for the cards, just need to know how to
write the drivers in QNX.
Should I use QNX 4 or 6?
Thanks,
Jason
Jason <jsouder@vehicle.me.berkeley.edu> wrote:
It looks like I’ll have to write my own for these DAQ and counter-timer
cards. I have the memory maps for the cards, just need to know how to
write the drivers in QNX.Should I use QNX 4 or 6?
Doesn’t matter to me, I sell books for both 
I’d go with QNX 6 though, it’s a lot easier.
Check out www.parse.com/books/book_v3/
Cheers,
-RK
–
Robert Krten, PARSE Software Devices +1 613 599 8316.
Realtime Systems Architecture, Books, Video-based and Instructor-led
Training and Consulting at www.parse.com.
Email my initials at parse dot com.
Easier?
To sell the book or write the driver
Thanks …I needed that one, it’s been hectic here today.
ms…
“Robert Krten” <nospam86@parse.com> wrote in message
news:ahru4g$kvk$1@inn.qnx.com…
Jason <> jsouder@vehicle.me.berkeley.edu> > wrote:
It looks like I’ll have to write my own for these DAQ and counter-timer
cards. I have the memory maps for the cards, just need to know how to
write the drivers in QNX.Should I use QNX 4 or 6?
Doesn’t matter to me, I sell books for both >
I’d go with QNX 6 though, it’s a lot easier.Check out > www.parse.com/books/book_v3/
Cheers,
-RK–
Robert Krten, PARSE Software Devices +1 613 599 8316.
Realtime Systems Architecture, Books, Video-based and Instructor-led
Training and Consulting at > www.parse.com> .
Email my initials at parse dot com.
Mike Schneider <Mike.Schneider@us.heidelberg.com> wrote:
Easier?
To sell the book or write the driver >
To sell the book; the QNX 4 books are buried in the back room
(You’re welcome! )
Cheers,
-RK
Thanks …I needed that one, it’s been hectic here today.
ms…“Robert Krten” <> nospam86@parse.com> > wrote in message
news:ahru4g$kvk$> 1@inn.qnx.com> …
Jason <> jsouder@vehicle.me.berkeley.edu> > wrote:
It looks like I’ll have to write my own for these DAQ and counter-timer
cards. I have the memory maps for the cards, just need to know how to
write the drivers in QNX.Should I use QNX 4 or 6?
Doesn’t matter to me, I sell books for both >
I’d go with QNX 6 though, it’s a lot easier.Check out > www.parse.com/books/book_v3/
Cheers,
-RK–
Robert Krten, PARSE Software Devices +1 613 599 8316.
Realtime Systems Architecture, Books, Video-based and Instructor-led
Training and Consulting at > www.parse.com> .
Email my initials at parse dot com.
–
Robert Krten, PARSE Software Devices +1 613 599 8316.
Realtime Systems Architecture, Books, Video-based and Instructor-led
Training and Consulting at www.parse.com.
Email my initials at parse dot com.
Jason,
I have been using digital input/output and counter/timer cards in QNX4,
however I just access the hardware inside the program application. I am not
using any specific driver.
Oscar E. Soto
Control Adaptable SA de CV
Tel: +52 (81) 8340·0006
Fax: +52 (81) 8340·0014
“Jason” <jsouder@vehicle.me.berkeley.edu> escribió en el mensaje
news:3D4178DD.4090000@vehicle.me.berkeley.edu…
It looks like I’ll have to write my own for these DAQ and counter-timer
cards. I have the memory maps for the cards, just need to know how to
write the drivers in QNX.Should I use QNX 4 or 6?
Thanks,
Jason