CAN Bus support

Hi to all, I would like to use QNX 6.2 as the operating system of an
embedded device that as to acquire data from the serial port and send it via
a CAN bus to a logging station. The problem is I wasn’t able to find any
information about supported CAN controllers on the QNX website. Does anyone
has suggestions on where to find informations about this ?
Any help would be appreciated, thanx.


\

Alessandro Mirri, Eng.
University of Bologna
Via Seganti, 103
47100 Forlì
Italy
Tel. +39543786931
Cell. +393478302755
e-mail: amirriNOSPAM@libero.it

Alessandro,

have a look to
http://www.dachs.info/CAN.htm it’s all available!

There are board/QNX-driver packages and C-APIs,
IEC 61131-3 etc. for QNX 4.25 and QNX Neutrino RTOS v.6.2

For QNX Neutrino RTOS v.6.2 are offered additional
options like Python-API, PVM-API, DACHSview etc.

DACHSview is a real-time component-based programming tool
for easy cross-development, no compiler needed!
Programming like playing with visual objects :slight_smile:
http://www.qnx.com/partners/news/pa_nw_steinhoff.html

you will find some screen dumps of a CAN application
with DACHSview at http://www.steinhoff-automation.com

If it’s interesting for you, you can contact me directly
under js@steinhoff-automation.com or +49 6431 529366

Best regards,
Jutta


Alessandro Mirri wrote:

Hi to all, I would like to use QNX 6.2 as the operating system of an
embedded device that as to acquire data from the serial port and send it via
a CAN bus to a logging station. The problem is I wasn’t able to find any
information about supported CAN controllers on the QNX website. Does anyone
has suggestions on where to find informations about this ?
Any help would be appreciated, thanx.


Alessandro Mirri, Eng.
University of Bologna
Via Seganti, 103
47100 Forlì
Italy
Tel. +39543786931
Cell. +393478302755
e-mail: > amirriNOSPAM@libero.it

We have CAN drivers and CAN resource managers for QNX4 and QNX6.
Please have a look at

http://www.bitctrl.com/produkte/can/ueberblick.htm

Regards
Dr. G. Geigemüller


BitCtrl Systems GmbH
Weißenfelser Str. 67
04229 Leipzig, Germany

E-Mail: info@bitctrl.de
Internet: www.bitctrl.de, www.bitctrl.com
Tel: +49 341-490670
Fax: +49 341-4906715



“Alessandro Mirri” <mirri@usa.net> schrieb im Newsbeitrag
news:b4not0$bmi$1@inn.qnx.com

Hi to all, I would like to use QNX 6.2 as the operating system of an
embedded device that as to acquire data from the serial port and send it
via
a CAN bus to a logging station. The problem is I wasn’t able to find any
information about supported CAN controllers on the QNX website. Does
anyone
has suggestions on where to find informations about this ?
Any help would be appreciated, thanx.


\

Alessandro Mirri, Eng.
University of Bologna
Via Seganti, 103
47100 Forlì
Italy
Tel. +39543786931
Cell. +393478302755
e-mail: > amirriNOSPAM@libero.it