Trying to run: QNX 4.25
On a Compaq Presario 633 486DX2
-24 Meg of Ram.
-HDD: Seagate 212M, ST3243A
- video is on the mother board.
When ever I attempt to boot the system without the CD I get a
mount () of /dev/hd0.0t77 failed: Corrupted file system detected.
The simple solution, I know, is to leave the CD Rom in there, however
that’s not possible.
I have reinstalled 3 times, the last time after I performed
dinit -hr /dev/hd0.0t77 which was followed by a hearty
chkfsys -Pru /dev/hd0.0t77
The boot floppy won’t when the CD-ROM is not present.
I’m at a loss. Any help would be appreciated
Thanx,
Brian K. Hlady
Check you’re BIOS settings for boot device order
Brian K. Hlady <hlady@kos.net> wrote in message
news:39C16A1A.B28A4126@kos.net…
Trying to run: QNX 4.25
On a Compaq Presario 633 486DX2
-24 Meg of Ram.
-HDD: Seagate 212M, ST3243A
- video is on the mother board.
When ever I attempt to boot the system without the CD I get a
mount () of /dev/hd0.0t77 failed: Corrupted file system detected.
The simple solution, I know, is to leave the CD Rom in there, however
that’s not possible.
I have reinstalled 3 times, the last time after I performed
dinit -hr /dev/hd0.0t77 which was followed by a hearty
chkfsys -Pru /dev/hd0.0t77
The boot floppy won’t when the CD-ROM is not present.
I’m at a loss. Any help would be appreciated
Thanx,
Brian K. Hlady