Problem with TNT2

Hi,

we have some Problem with TNT2 Graphic Card on QNX4.25 (not RTP), the
crttrap only recognize it as Vesabios.
The tnt.trap doesn’t seem to snap.
Could anybody help us ?

Ulf

Could you please post the output of /usr/bin/show_pci -v?
(This needs to be run as root)

Herbst , Ulf <u.herbst@tu-bs.de> wrote:

Hi,

we have some Problem with TNT2 Graphic Card on QNX4.25 (not RTP), the
crttrap only recognize it as Vesabios.
The tnt.trap doesn’t seem to snap.
Could anybody help us ?

Ulf

Here is the output for the graphic card:

Vendor ID = 10deh,
Device ID = 2dh,
PCI index = 0h
Class Code = 030000h Display (VGA) ProgIF=0
Revision ID = 15h
Bus number = 1
Device number = 5
Function num = 0
Status Reg = 2b0h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Base Address = MEM@ee000000h,32bit length 16777216
MEM@e2000000h,Prefetchable,32bit length 3355443
2
Subsystem Vendor ID = 1102h
Subsystem ID = 102ch
Expansion ROM = efef0000h length 65536 disabled
Max Lat = 1ns
Min Gnt = 5ns
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 11


The Graphic Card is not a TNT2 but a TNT2 M64. Is that a problem?

Ulf


Michael Van Reenen <mvr@qnx.com> schrieb in im Newsbeitrag:
8tc87o$d6o$1@nntp.qnx.com

Could you please post the output of /usr/bin/show_pci -v?
(This needs to be run as root)

Herbst , Ulf <> u.herbst@tu-bs.de> > wrote:
Hi,

we have some Problem with TNT2 Graphic Card on QNX4.25 (not RTP), the
crttrap only recognize it as Vesabios.
The tnt.trap doesn’t seem to snap.
Could anybody help us ?

Ulf

There is a new tnt.trap, which contains more device ids. You
should download the latest beta graphics patch. The patch is:

001010.graphics.v1.14B.beta.tar.gz

You need to be a member of the beta program to access this patch. To
become a member send email to beta@qnx.com

Try to run crttrap trap after you install this patch and see if
your card is then detected.


Here is the output for the graphic card:

Vendor ID = 10deh,
Device ID = 2dh,

The Graphic Card is not a TNT2 but a TNT2 M64. Is that a problem?

No, it shouldn’t be.