ACCTON EN1207D-TX DRIVER

QNX Newsgroups (Archives) qdn.public.qnx4
1

Hi,
Does anyone know if QNX has a driver for the ACCTON EN1207D-TX Ethernet card
? They indicated that they were working on driver called Net.ether21x4x,
but it don’t work.

Thanks in advance.

2

“John” <z1j@21cn.com> wrote in message news:8vas0g$r0e$1@inn.qnx.com…

Hi,
Does anyone know if QNX has a driver for the ACCTON EN1207D-TX Ethernet
card
? They indicated that they were working on driver called Net.ether21x4x,
but it don’t work.

Net.ether21x4x is an old driver I don’t think it comes with QNX 4.25? What

version of QNX 4 do you have. The driver has been replaced by Net.tulip.
It supports wider range of card.

Thanks in advance.
\

3

I have QNX4.23A and QNX4.25. I use Net.tulip driver,but it display
“DriverInit: Unable to locate adapter.” .I use “Net.ether2100 -v” ,it can
get the MAC ,but also can’t init. And I use
‘Net.ether21x4x -i12 -pe000 -a"0000e8 937c90"’, it display none but don’t
work.

4

Previously, John wrote in qdn.public.qnx4:

I have QNX4.23A and QNX4.25. I use Net.tulip driver,but it display
“DriverInit: Unable to locate adapter.” .I use “Net.ether2100 -v” ,it can
get the MAC ,but also can’t init. And I use
‘Net.ether21x4x -i12 -pe000 -a"0000e8 937c90"’, it display none but don’t
work.

Please post the output from ‘show_pci -v’

Thanks, Hugh.

–

Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8

5

Hugh
The output from ‘show_pci -v’ is on
the below,

Vendor ID = 1113h,
Device ID = 1211h,
PCI index = 0h
Class Code = 20000h Network
(Ethernet) ProgIF=0
Revision ID = 10h
Bus number = 0
Device number = 10
Function num = 0
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test
not supported
Latency Timer = 0h
Cache Line Size= 0h
Base Address = IO@e000h length 256
bytes MEM@e7000000h,32bit length 256
Max Lat = 64ns
Min Gnt = 32ns
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 12


Thanks.

John

6

Previously, John wrote in qdn.public.qnx4:

Hugh
The output from ‘show_pci -v’ is on
the below,

This adapter is supported by the Net.rtl driver.

Vendor ID = 1113h,
Device ID = 1211h,
PCI index = 0h
Class Code = 20000h Network
(Ethernet) ProgIF=0
Revision ID = 10h
Bus number = 0
Device number = 10
Function num = 0
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test
not supported
Latency Timer = 0h
Cache Line Size= 0h
Base Address = IO@e000h length 256
bytes MEM@e7000000h,32bit length 256
Max Lat = 64ns
Min Gnt = 32ns
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 12


Thanks.

John
\

–

Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8