Adaptec SlimSCSI 1460 PCMCIA

Hi.

I have a DELL Inpiron 5000 Laptop. I’m trying to setup an Adaptec SlimSCSI
1460 PCMCIA card. The Fsys.aha2scsi driver keeps complaining about no
adapter found. Why? Please Help.

I start the driver using…

Fsys.aha2scsi -v fsys -n0=scsi aha2scsi -a340 -i11 &

Here is the config for my system.

Sock Win Type Flags PID Base Size IRQ Base Size
DMA
1 0 Network C—I-±-------W None 0x320 16 7
2 0 T340 C—I-±-------W None 0x340 16 11

; socket 1
[device]
manufacturer = “3Com”
product = “Megahertz 589E”
info1 = “TP/BNC LAN PC Card”
info2 = “005”
regbase = 0x10000
config = 0x01, 0x0601, irq any, io any+16 (width=16)
config = 0x03, 0x0601, irq any, io any+16 (width=16)
register = 0, 0x40, 0x40 ; level mode interrupts
; socket 2
[device]
manufacturer = “Adaptec, Inc.”
product = “APA-1460 SCSI Host Adapter”
info1 = “Version 0.01”
regbase = 0x2000
config = 0x09, 0xffff, irq 9|10|11|12, io 0x340-0x35f (width=16)
config = 0x08, 0xffff, irq 9|10|11|12, io 0x140-0x15f (width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

free memory: 0xD5000-0xD5FFF
in-use memory: 0xD4000-0xD4FFF
free io ports: 0x330-0x330 0x350-0x350
reserved free io ports: 0x170-0x177 0x2E8-0x2EF 0x330-0x33F 0x376-0x377
0x3E8-0x3EF
in-use io ports: 0x320-0x32F 0x340-0x34F
reserved free interrupts: 5 10
in-use interrupts: 7 11

; pcmcia.cfg
;
; Minimal resource set
;

[resources]
memory = 0xd4000-0xd5fff
;ports = 0x320+16, 0x340-0x33f
ports = 0x340-0x33f
rports = 0x2e8+8, 0x330+16, 0x3e8+8, 0x170+8, 0x376+2
irqs = 5, 7, 11, 12

; pcmcia.5
;
; Minimal resource set
;

[resources]
memory = 0xd4000-0xd5fff
ports = 0x320-0x330, 0x340-0x350
rports = 0x2e8+8, 0x330+16, 0x3e8+8, 0x170+8, 0x376+2
rirqs = 5, 10
irqs = 7, 11

;
; PCMCIA card definitions file
;
; Describes configurations for all the PCMCIA cards we know about.
;

; socket 1
[device]
manufacturer = “3Com Corporation”
product = “3C589D”
info1 = “TP/BNC LAN Card Ver. 2a”
info2 = “000002”
regbase = 0x10000
config = 0x01, 0x0601, irq any, io any+16 (width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “Adaptec, Inc.”
product = “APA-1460 SCSI Host Adapter”
info1 = “Version 0.01”
regbase = 0x2000
config = 0x09, 0x8001, irq any, io any+16 (width=16)
config = 0x08, 0x8001, irq any, io 0x140-0x15f (width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “SunDisk”
product = “SDP”
info1 = “5/3 0.6”
regbase = 0x200
config = 0x01, 0x0401, irq any, io any+16 (width=16)
config = 0x02, 0x0401, irq 14, io 0x1f0-0x1f7 (width=16), io 0x3f6-0x3f7
(width=16)
config = 0x03, 0x0401, irq 14, io 0x170-0x177 (width=16), io 0x376-0x377
(width=16)
register = 0,0x40,0x40

[device]
manufacturer = “Intel”
product = “MODEM 2400*”
info1 = “iNC110US”
regbase = 0x100
config = 0x01, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x02, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x03, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x04, 0x0201, irq any, io 0x2e8-0x2ef (width=8)
vpp = 12.0

[device]
manufacturer = “MEGAHERTZ”
product = “XJ??44”
info1 = “A5”
info2 = “PCMCIA MODEM”
regbase = 0x100
config = 0x20, 0x0201, irq any, io 0x3f8+8
config = 0x21, 0x0201, irq any, io 0x2f8+8
config = 0x22, 0x0201, irq any, io 0x3e8+8
config = 0x23, 0x0201, irq any, io 0x2e8+8

[device]
manufacturer = “SunDisk”
product = “SDP5”
regbase = 0x200
config = 0x01, 0x0401, irq any, io any+16 (width=16)
config = 0x02, 0x401, irq any, io 0x1f0-0x1f7(width=16), io 0x3f6-0x3f7
config = 0x03, 0x401, irq any, io 0x170-0x177(width=16), io 0x376-0x377
register = 0,0x40,0x40

[device]
manufacturer = “MINISTOR”
product = “MP85P”
regbase = 0x200
config = 0x01, 0x401, irq any, io any+16
config = 0x02, 0x401, irq any, io 0x1f0-0x1f7 (width=16), io 0x3f6-0x3f7
(width=16)
config = 0x03, 0x401, irq any, io 0x170-0x177(width=16), io 0x376-0x377
register = 0,0x40,0x40

[device]
manufacturer = “NCR”
product = “WaveLAN/PCMCIA”
info1 = “Version 1.0?”
regbase = 0x4000
config = 0x41, 0x0602, irq any, io any+8 (width=8), mem any+0x8000
(offset=0, attribute)

[device]
manufacturer = “New Media Corporation”
product = “Sound”
regbase = 0x100
config = 0x20, 0x9001, irq any, io any+16 (width=16), io 0x388-0x38b
(width=16)
config = 0x02, 0x9001, irq any, io 0x300-0x31f (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “Trantor Systems, Ltd.”
product = “T460 SCSI Host Adapter”
regbase = 0x8000
config = 0x08, 0x8001, irq any, io 0x360-0x370 (width=16), io 0xa830-0xa904
(width=16)
config = 0x09, 0x8001, irq any, io 0x350-0x360 (width=16), io 0x3010-0x30b8
(width=16)
config = 0x0c, 0x8001, irq any, io 0x260-0x270 (width=16), io 0x3010-0x30b8
(width=16)
config = 0x0d, 0x8001, irq any, io 0x250-0x260 (width=16), io 0x3010-0x30b8
(width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

;
; LinkSys EC2T NE2000 Card
; Irvine, CA 92714 (714)261-1288
; This is the old-style LinkSys EC2T.
; If you have a combo card, use the next entry.

[device]
manufacturer = “E-CARD”
product = “E-CARD”
info1 = “Ver 01.00”
regbase = 0x400
config = 0x20, 0x0601, irq any, io 0x300-0x31f (width=16)
config = 0x21, 0x0601, irq any, io 0x320-0x33f (width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “Linksys”
product = “Combo PCMCIA EthernetCard (EC2T)”
info1 = “2.0”
regbase = 0xfd0
config = 0x00, 0x0601, irq 2|3|4|5|6|7|9|10|11|12|13|15, io any+32
(width=16)
config = 0x01, 0x0601, irq 2|3|4|5|6|7|9|10|11|12|13|15, io 0x300-0x31f
(width=16)
config = 0x02, 0x0601, irq 2|3|4|5|6|7|9|10|11|12|13|15, io 0x320-0x33f
(width=16)
config = 0x03, 0x0601, irq 2|3|4|5|6|7|9|10|11|12|13|15, io 0x340-0x35f
(width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “LINKSYS”
product = “E-CARD”
info1 = “Ver 02.00”
regbase = 0x400
config = 0x20, 0x0601, irq 2|3|4|5|6|7|9|10|11|12|13|15, io any+32
(width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

;
; Accton EN2212 NE2000 Ethernet Card
;
; NOTE: This card does not work with the NE2000 driver, and
; the CIS is unreliable.
;

[device]
manufacturer = “ACCTON”
product = “EN2212”
info1 = “ETHERNET”
info2 = “R04”
regbase = 0x100
config = 0x01, 0x0601, irq any, io 0x300-0x31f (width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

;
; Megahertz 14.4 FAX Modem (may be branded as a Dell)
;

[device]
manufacturer = “MEGAHERTZ”
product = “CC3144”
info1 = “A5”
info2 = “PCMCIA MODEM”
regbase = 0x200
config = 0x20, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq any, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

;
; ChemCard/ThinFAX PCMCIA Series 14.4k modem
;

[device]
manufacturer = “EXP”
product = “ThinFax 1414”
info1 = “FM-1134”
info2 = “1.0”
regbase = 0x100
config = 0x20, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq any, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

;
; D-Link DE-650 NE2000 Ethernet Card

[device]
manufacturer = “D-Link”
product = “DE-650”
regbase = 0x0400
config = 0x20, 0x0601, irq any, io 0x300-0x31f (width=16)
config = 0x21, 0x0601, irq any, io 0x320-0x33f (width=16)
register = 0, 0x40, 0x40

;
; Mitsubishi modem
;

[device]
manufacturer = “MITSUBISHI”
product = “CC3144”
info1 = “A5”
info2 = “PCMCIA MODEM”
regbase = 0x200
config = 0x20, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq any, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

;
; Data Race RediCARD v.32bis data, v.17 FAX
; From: Ross Koningstein rkoningstein@quics
;

[device]
manufacturer = “DATA RACE”
product = “V.32bis/FAX 145-01-24”
info1 = “5.50”
info2 = “”
regbase = 0x100
config = 0x20, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq any, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

;
; USRobotics modem
;

[device]
manufacturer = “USRobotics”
product = “PCMCIA 14,400 Fax”
info1 = “V1.0”
regbase = 0x1e6
config = 0x01, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x03, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x02, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x04, 0x0201, irq any, io 0x2e8-0x2ef (width=8)
;register = 0, 0x40, 0x40 ; level mode interrupts
vpp = 12.0

;
; Intel Fax modem
;

[device]
manufacturer = “Intel”
product = “Fax 9600”
info1 = “iNC210US”
regbase = 0x200
config = 0x20, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq any, io 0x2e8-0x2ef (width=8)

[device]
manufacturer = “Socket Communications, Inc.”
product = “Ethernet EA Lan Adapter”
info1 = “Revision H”
info2 = “10/17/95”
regbase = 0x3f8
config = 0x20, 0x0601, irq any, io 0x300-0x31f
config = 0x21, 0x0601, irq any, io 0x320-0x33f
config = 0x22, 0x0601, irq any, io 0x340-0x35f
config = 0x23, 0x0601, irq any, io 0x360-0x37f
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “Socket Communications Inc”
product = “Socket EA PCMCIA LAN Adapter Revision D”
regbase = 0x10000
config = 0x01, 0x0601, irq any, io any+32 (width=16)
config = 0x03, 0x0601, irq any, io 0x2a0-0x2bf (width=16)
config = 0x05, 0x0601, irq any, io 0x2c0-0x2df (width=16)
config = 0x07, 0x0601, irq any, io 0x2e0-0x2ff (width=16)
config = 0x09, 0x0601, irq any, io 0x300-0x31f (width=16)
config = 0x0b, 0x0601, irq any, io 0x320-0x33f (width=16)
config = 0x0d, 0x0601, irq any, io 0x340-0x35f (width=16)
config = 0x0f, 0x0601, irq any, io 0x360-0x37f (width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

;
; New Socket EA card
;

[device]
manufacturer = “Socket Communications Inc”
product = “Socket EA PCMCIA LAN Adapter Revision E”
regbase = 0x10000
config = 0x01, 0x0601, irq any, io any+32 (width=16)
config = 0x03, 0x0601, irq any, io 0x2a0-0x2bf (width=16)
config = 0x05, 0x0601, irq any, io 0x2c0-0x2df (width=16)
config = 0x07, 0x0601, irq any, io 0x2e0-0x2ff (width=16)
config = 0x09, 0x0601, irq any, io 0x300-0x31f (width=16)
config = 0x0b, 0x0601, irq any, io 0x320-0x33f (width=16)
config = 0x0d, 0x0601, irq any, io 0x340-0x35f (width=16)
config = 0x0f, 0x0601, irq any, io 0x360-0x37f (width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
regbase = 0x200
manufacturer = “Intel”
product = “FlashDrive”
info1 = “iFDP2SA”
config = 0x02, 0x0401, irq any, io 0x1f0-0x1f7, io 0x3f6-0x3f7
config = 0x03, 0x0401, irq any, io 0x170-0x177, io 0x376-0x377
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “SunDisk”
product = “SDP5”
info1 = “1.0”
regbase = 0x200
config = 0x01, 0x0401, irq any, io any+16 (width=16)
config = 0x02, 0x0401, irq any, io 0x1f0-0x1f7, io 0x3f6-0x3f7
config = 0x03, 0x0401, irq any, io 0x170-0x177, io 0x376-0x377
register = 0, 0x40, 0x40 ; level mode interrupts


[device]
manufacturer = “Contemporary Control Systems, Inc.”
product = “PCM20 Arcnet Adapter”
info1 = “Rev A.”
regbase = 0x200
config = 0x01, 0x0601, irq 3|5|9|10|11|12|15, io any+16 (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “INTEGRAL PERIPHERALS”
product = “ATA CARD”
regbase = 0x200
config = 0x02, 0x0401, irq any, io 0x1f0-0x1f7, io 0x3f6-0x3f6
config = 0x03, 0x0401, irq any, io 0x170-0x177, io 0x376-0x376
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “SunDisk”
product = “SDP”
info1 = “5A1.1”
regbase = 0x200
config = 0x01, 0x0401, irq any, io any+16 (width=16)
config = 0x02, 0x0401, irq any, io 0x1f0-0x1f7 (width=16), io 0x3f6-0x3f7
(width=16)
config = 0x03, 0x0401, irq any, io 0x170-0x177 (width=16), io 0x376-0x377
(width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “MEGAHERTZ”
product = “XJ2288”
info1 = “V.34 PCMCIA MODEM”
regbase = 0x100
config = 0x20, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq any, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “Socket Communications Inc”
product = “Serial Port Adapter Revision B”
regbase = 0x8000
config = 0x01, 0x0201, irq any, io any+8 (width=8)
config = 0x03, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x05, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x07, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x09, 0x0201, irq any, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts
; socket 2
[device]
manufacturer = “Megahertz”
product = “CC10BT/2”
info1 = “PCMCIA 10BASE-T/2 ETHERNET ADAPTER”
info2 = “0000860503F6”
regbase = 0x300
config = 0x01, 0x0601, irq any, io any+16 (width=16)
config = 0x03, 0x0601, irq any, io any+32 (width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

; socket 1
[device]
manufacturer = “Maxtor”
product = “MXL171”
regbase = 0x200
config = 0x01, 0x0401, irq any, io any+16 (width=16)
config = 0x02, 0x0401, irq 14, io 0x1f0-0x1f7 (width=16), io 0x3f6-0x3f7
(width=16)
config = 0x03, 0x0401, irq 14, io 0x170-0x177 (width=16), io 0x376-0x377
(width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

; socket 1
[device]
manufacturer = “SunDisk”
product = “SDP”
info1 = “5/3 0.5”
regbase = 0x200
config = 0x01, 0x0401, irq any, io any+16 (width=16)
config = 0x02, 0x0401, irq 14, io 0x1f0-0x1f7 (width=16), io 0x3f6-0x3f7
(width=16)
config = 0x03, 0x0401, irq 14, io 0x170-0x177 (width=16), io 0x376-0x377
(width=16)
register = 0, 0x40, 0x40 ; level mode interrupts

; socket 1
[device]
manufacturer = “COM1 SA”
product = “MGSM CARD”
info1 = “REV#1 0”
info2 = “4T129000000fXX”
regbase = 0x7e0
config = 0x01, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x3f8-0x3ff (width=8)
config = 0x02, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x2f8-0x2ff (width=8)
config = 0x03, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x3e8-0x3ef (width=8)
config = 0x04, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

; socket 1
[device]
manufacturer = “AD2880WRLD”
product = “International_V.34_PC-Card_Modem”
info1 = “003”
info2 = “A”
regbase = 0x200
config = 0x20, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x2e8-0x2ef (width=8)
config = 0x30, 0x0201, irq 2|3|4|5|7|9|10|15, io any+8 (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “MEGAHERTZ”
product = “XJ1144”
info1 = “A5”
info2 = “PCMCIA MODEM”
regbase = 0x100
config = 0x20, 0x0201, irq 2|3|4|5, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq 2|3|4|5, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq 2|3|4|5, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq 2|3|4|5, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “AD2880WRLD”
product = “International_V.34_PC-Card_Modem”
info1 = “003”
info2 = “A”
regbase = 0x200
config = 0x20, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x2e8-0x2ef (width=8)
config = 0x30, 0x0201, irq 2|3|4|5|7|9|10|15, io any+8 (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “U.S. Robotics”
product = “SP1336”
info1 = “Sportster V.34/ x2 Upgradeable”
regbase = 0x300
config = 0x20, 0x0201, irq any, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq any, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq any, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq any, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts

[device]
manufacturer = “Motorola”
product = “MONTANA 33.6 FAX/MODEM”
info1 = “V2.0”
regbase = 0x100
config = 0x20, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0201, irq 2|3|4|5|7|9|10|15, io 0x2e8-0x2ef (width=8)
register = 0, 0x40, 0x40 ; level mode interrupts


; CNet CN40BC NE2000 Card
; CN40BC CNet TP/BNC
;
; CNet USA
; 1455 McCandless Dr.
; Milpitas, CA 95035, USA
;
; CNet Europa
; Kleinh