Fsys.sym8scsi with 895 controller

QNX Newsgroups (Archives) qdn.public.qnx4
1

Hi,
I’m having trouble finding a hard disk attached to a Symbios 895 onboard
SCSI controller. Is there a newer version of the driver than the one I have
after Patch E, or might I need some special command line options to the
driver. After starting Fsys (I boot from the network) and then
Fsys.sym8scsi,
path 0 points to the controller, it seems, but no drives are found.

Thanks for any info,

David Sheinberg

2

Do you correct your problem, because i have an HP E800 server, with the same
controller, and i got the same problem.

Thanks.

“David Sheinberg” <sheinb@brown.edu> a écrit dans le message news:
9g8l6c$mjt$1@inn.qnx.com…

Hi,
I’m having trouble finding a hard disk attached to a Symbios 895 onboard
SCSI controller. Is there a newer version of the driver than the one I
have
after Patch E, or might I need some special command line options to the
driver. After starting Fsys (I boot from the network) and then
Fsys.sym8scsi,
path 0 points to the controller, it seems, but no drives are found.

Thanks for any info,

David Sheinberg

3

Hi David,

Can you post the output from ‘show_pci -v’

Regards,

Joe


David Sheinberg <sheinb@brown.edu> wrote:

Hi,
I’m having trouble finding a hard disk attached to a Symbios 895 onboard
SCSI controller. Is there a newer version of the driver than the one I have
after Patch E, or might I need some special command line options to the
driver. After starting Fsys (I boot from the network) and then
Fsys.sym8scsi,
path 0 points to the controller, it seems, but no drives are found.

Thanks for any info,

David Sheinberg