Please excuse my english
Hi I have some troubles with net cards
I,ve trying with
dlink de660+, detected like memory card.
generic and is detected like a ne2000, but not recognized for nettrap.
please help me
http://qdn.qnx.com/support/bok/solution.qnx?868
“Francisco Philip” <fphilip@sortearsa.com.ar> wrote in message
news:9h3aqh$4fn$1@inn.qnx.com…
Please excuse my english
Hi I have some troubles with net cards
I,ve trying with
dlink de660+, detected like memory card.
generic and is detected like a ne2000, but not recognized for nettrap.please help me
Previously, Francisco Philip wrote in qdn.public.qnx4:
Please excuse my english
Hi I have some troubles with net cards
I,ve trying with
dlink de660+, detected like memory card.
generic and is detected like a ne2000, but not recognized for nettrap.
The D-link DE660 is supported. You have to add the card to the
/etc/config/pcmcia.cards file by doing ‘pin con >> /etc/config/pcmcia.cards’.
After doing this, edit the pcmcia.cards file and remove the “width=16” from
the end of the lines for the entry for the D-Link card. After this you will
have to slay and re-start Pcmcia.generic. It is advisable to start
‘Pcmcia.generic -i0’.
please help me
\
Hugh,
I seem to remember QNX4 does not support any 100M pcmcia net card.
is it still true?
frank
On Mon, 25 Jun 2001, Hugh Brown wrote:
Previously, Francisco Philip wrote in qdn.public.qnx4:
Please excuse my english
Hi I have some troubles with net cards
I,ve trying with
dlink de660+, detected like memory card.
generic and is detected like a ne2000, but not recognized for nettrap.
The D-link DE660 is supported. You have to add the card to the
/etc/config/pcmcia.cards file by doing ‘pin con >> /etc/config/pcmcia.cards’.
After doing this, edit the pcmcia.cards file and remove the “width=16” from
the end of the lines for the entry for the D-Link card. After this you will
have to slay and re-start Pcmcia.generic. It is advisable to start
‘Pcmcia.generic -i0’.please help me
\
Previously, Frank Liu wrote in qdn.public.qnx4:
Hugh,
I seem to remember QNX4 does not support any 100M pcmcia net card.
is it still true?
frank
This is a 10Mbit card.
On Mon, 25 Jun 2001, Hugh Brown wrote:
Previously, Francisco Philip wrote in qdn.public.qnx4:
Please excuse my english
Hi I have some troubles with net cards
I,ve trying with
dlink de660+, detected like memory card.
generic and is detected like a ne2000, but not recognized for nettrap.
The D-link DE660 is supported. You have to add the card to the
/etc/config/pcmcia.cards file by doing ‘pin con >> /etc/config/pcmcia.cards’.
After doing this, edit the pcmcia.cards file and remove the “width=16” from
the end of the lines for the entry for the D-Link card. After this you will
have to slay and re-start Pcmcia.generic. It is advisable to start
‘Pcmcia.generic -i0’.please help me
\
Previously, Hugh Brown wrote in qdn.public.qnx4:
Previously, Francisco Philip wrote in qdn.public.qnx4:
Please excuse my english
Hi I have some troubles with net cards
I,ve trying with
dlink de660+, detected like memory card.
generic and is detected like a ne2000, but not recognized for nettrap.
The D-link DE660 is supported. You have to add the card to the
/etc/config/pcmcia.cards file by doing ‘pin con >> /etc/config/pcmcia.cards’.
After doing this, edit the pcmcia.cards file and remove the “width=16” from
the end of the lines for the entry for the D-Link card. After this you will
have to slay and re-start Pcmcia.generic. It is advisable to start
‘Pcmcia.generic -i0’.please help me
With regard to your e-mail, please don’t send e-mail directly to developers,
as the continuity will be lost in this thread. Try removing IRQ 5 from your
/etc/config/pcmcia.cfg file as this is normally used by audio.
On Mon, 25 Jun 2001, Hugh Brown wrote:
Previously, Frank Liu wrote in qdn.public.qnx4:
Hugh,
I seem to remember QNX4 does not support any 100M pcmcia net card.
is it still true?
frank
This is a 10Mbit card.
I’ll take it QNX4 still does not support any 100Mbit pcmcia net card.
Do you have any plans to add the support in the future? Or you pretty
much stopped the new development for QNX4?
frank
On Mon, 25 Jun 2001, Hugh Brown wrote:
Previously, Francisco Philip wrote in qdn.public.qnx4:
Please excuse my english
Hi I have some troubles with net cards
I,ve trying with
dlink de660+, detected like memory card.
generic and is detected like a ne2000, but not recognized for nettrap.
The D-link DE660 is supported. You have to add the card to the
/etc/config/pcmcia.cards file by doing ‘pin con >> /etc/config/pcmcia.cards’.
After doing this, edit the pcmcia.cards file and remove the “width=16” from
the end of the lines for the entry for the D-Link card. After this you will
have to slay and re-start Pcmcia.generic. It is advisable to start
‘Pcmcia.generic -i0’.please help me
\
Previously, Frank Liu wrote in qdn.public.qnx4:
On Mon, 25 Jun 2001, Hugh Brown wrote:
Previously, Frank Liu wrote in qdn.public.qnx4:Hugh,
I seem to remember QNX4 does not support any 100M pcmcia net card.
is it still true?
frank
This is a 10Mbit card.I’ll take it QNX4 still does not support any 100Mbit pcmcia net card.
Do you have any plans to add the support in the future? Or you pretty
much stopped the new development for QNX4?
frank
No, there will be no PCMCIA 100Mbit support under QNX4.
On Mon, 25 Jun 2001, Hugh Brown wrote:
Previously, Francisco Philip wrote in qdn.public.qnx4:
Please excuse my english
Hi I have some troubles with net cards
I,ve trying with
dlink de660+, detected like memory card.
generic and is detected like a ne2000, but not recognized for nettrap.
The D-link DE660 is supported. You have to add the card to the
/etc/config/pcmcia.cards file by doing ‘pin con >> /etc/config/pcmcia.cards’.
After doing this, edit the pcmcia.cards file and remove the “width=16” from
the end of the lines for the entry for the D-Link card. After this you will
have to slay and re-start Pcmcia.generic. It is advisable to start
‘Pcmcia.generic -i0’.please help me
\