Network and memory

QNX Newsgroups (Archives) qdn.public.qnx4
1

I have upgraded RAM and I can not connect to network. My computer is Compaq
Deskpro 2000 with Pentium 200 MHz. When I start netstart socket can not be
created. Also I noticed that nameloc can not attach the name. This happend
once before when I upgraded RAM. I had to reinstall QNX4. As the alternative
boot I have QNX_RTP connected to network. It works fine, so there is no
hardware fault. Any suggestions (I rebuild the image but it does not help)?

Regards

,-._|\ Vladimir Kanovnik Melbourne PC UsersGroup
/ Oz \ Email: vlad@melbpc.org.au
_,–.x/ Telephone: +61 3 9563 2335
v Fax: +61 3 9563 2450
Mobile: 0412 134 012
~~ Australia ~~

2

Hi

Is the driver running at the time you run netstart? (output of sin).

Thanks

Erick.


Vladimir Kanovnik <vlad@melbpc.org.au> wrote:

I have upgraded RAM and I can not connect to network. My computer is Compaq
Deskpro 2000 with Pentium 200 MHz. When I start netstart socket can not be
created. Also I noticed that nameloc can not attach the name. This happend
once before when I upgraded RAM. I had to reinstall QNX4. As the alternative
boot I have QNX_RTP connected to network. It works fine, so there is no
hardware fault. Any suggestions (I rebuild the image but it does not help)?

Regards

,-._|\ Vladimir Kanovnik Melbourne PC UsersGroup
/ Oz \ Email: > vlad@melbpc.org.au
_,–.x/ Telephone: +61 3 9563 2335
v Fax: +61 3 9563 2450
Mobile: 0412 134 012
~~ Australia ~~