The QNX do not start up after I did the instalation procedure for qnxos in
/dev/hd1 from Qnx web site
" http://qdn.qnx.com/support/bok/solution.qnx?3955 "
No probles ocured in my boot manager LILO but after the qnx lilo’s option
selected, the screen shows:
“Press Esc for alternate OS…”
And do not show’s before it:
" Loader partition 1 "
Previously, Ricardo Az wrote in qdn.public.qnx4:
The QNX do not start up after I did the instalation procedure for qnxos in
/dev/hd1 from Qnx web site
Is your QNX partition on /dev/hd1 within the first 1024 cylinders of
the drive?
Mitchell Schoenbrun --------- maschoen@pobox.com
Yes it is.
But I can’t configure parameters for the second ide with Fsys.eide.
Mine Seagate drive parameters are:
16 heads
1223 cylinders
63 sector
601 MB
(ps. Schoenbrun from Vienna ?)
“Mitchell Schoenbrun” <maschoen@pobox.com> wrote in message
news:Voyager.010731224217.214B@schoenbrun.com…
Previously, Ricardo Az wrote in qdn.public.qnx4:
The QNX do not start up after I did the instalation procedure for qnxos
in
/dev/hd1 from Qnx web site
Is your QNX partition on /dev/hd1 within the first 1024 cylinders of
the drive?
Mitchell Schoenbrun --------- > maschoen@pobox.com