I am attempting to setup my QNX 4.25 system to utilize an Elo Accutouch
touchscreen but I am unable to get it working. inputtrap does not find the
touchscreen and I have attempted to use Input intellitch and various
arguments but nothing seems to be working. The touchscreen uses a serial
input and I have attempted to use both COM1 and COM2 with no success. Any
kind of assistance would be greatly appreciated.
Thank you,
Ross Brantner
brantner@nrc.net
I don’t think inputtrap detects touch screens. Have you tried
“smartset”?
Previously, Ross Brantner wrote in qdn.public.qnx4:
I am attempting to setup my QNX 4.25 system to utilize an Elo Accutouch
touchscreen but I am unable to get it working. inputtrap does not find the
touchscreen and I have attempted to use Input intellitch and various
arguments but nothing seems to be working. The touchscreen uses a serial
input and I have attempted to use both COM1 and COM2 with no success. Any
kind of assistance would be greatly appreciated.Thank you,
Ross Brantner
brantner@nrc.net
\
–
Mitchell Schoenbrun --------- maschoen@pobox.com
Ross,
Touchscreens usually come with drivers for Windows platforms, so you
can spend some extra time confirming that that particular PC’s
ports properly communicate with the touch screen controller.
I used Elographics Accutouch touchscreen E271-2210 and for a while
insisted on Intellitouch protocol instead of Smartset which
immediately worked. Unfortunately, Photon documentation is not very
specific about the touch screen hardware it supports…
Hope this helps,
Zeljko Fucek
Ross Brantner <brantner@nrc.net> wrote in message
news:9lh9ab$d98$1@inn.qnx.com…
I am attempting to setup my QNX 4.25 system to utilize an Elo Accutouch
touchscreen but I am unable to get it working. inputtrap does not find
the
touchscreen and I have attempted to use Input intellitch and various
arguments but nothing seems to be working. The touchscreen uses a serial
input and I have attempted to use both COM1 and COM2 with no success. Any
kind of assistance would be greatly appreciated.Thank you,
Ross Brantner
brantner@nrc.net
\
Thanks for your help but I was not lucky enough to see if using “smartset”
instead of “intellitch” would work. I determined that I had a hardware
problem within the touchmonitor when I tried to install on a Windows 2000
machine. I’ll let you know what happens when the replacement touchmonitor
arrives.
Thanks
Ross
“Ross Brantner” <brantner@nrc.net> wrote in message
news:9lh9ab$d98$1@inn.qnx.com…
I am attempting to setup my QNX 4.25 system to utilize an Elo Accutouch
touchscreen but I am unable to get it working. inputtrap does not find
the
touchscreen and I have attempted to use Input intellitch and various
arguments but nothing seems to be working. The touchscreen uses a serial
input and I have attempted to use both COM1 and COM2 with no success. Any
kind of assistance would be greatly appreciated.Thank you,
Ross Brantner
brantner@nrc.net
\