Hi,
We have recently purchased QNX-compatible CPCI based data acquisition
cards, CPU card and serial cards of Inova make.
BSP for QNX has been made available by the manufacturer. Due to this,
the serial ports(2) present on the CPU card get detected by Dev.ser and are
working fine. The system has 2 more serial ports on another CPCI card. How
to configure those for use with QNX? Does Dev.ser look for presence of PCI
serial cards in the system?
Thanks,
Krupa
Krupa, ask your Inova distributor for product ID 12084 (Ser2) or 12085
(Ser1)
Krupa wrote:
Hi,
We have recently purchased QNX-compatible CPCI based data acquisition
cards, CPU card and serial cards of Inova make.BSP for QNX has been made available by the manufacturer. Due to this,
the serial ports(2) present on the CPU card get detected by Dev.ser and are
working fine. The system has 2 more serial ports on another CPCI card. How
to configure those for use with QNX? Does Dev.ser look for presence of PCI
serial cards in the system?Thanks,
Krupa
Hello,
We are trying to obtain the product id from Inova…The board has the
following printed on it : LP-PB-SER2-C.
We are using ICP_CARR (Dual Piggy back carrier board) with IPB-SER (serial
communication piggybacks)
We had sent a copy of this query to Inova. We have not received any response
from them.
Regards,
Krupa
Jutta Steinhoff <j-steinhoff@web.de> wrote in message
news:3BBC3FC4.93E3A756@web.de…
Krupa, ask your Inova distributor for product ID 12084 (Ser2) or 12085
(Ser1)
Krupa wrote:Hi,
We have recently purchased QNX-compatible CPCI based data
acquisition
cards, CPU card and serial cards of Inova make.BSP for QNX has been made available by the manufacturer. Due to
this,
the serial ports(2) present on the CPU card get detected by Dev.ser and
are
working fine. The system has 2 more serial ports on another CPCI card.
How
to configure those for use with QNX? Does Dev.ser look for presence of
PCI
serial cards in the system?Thanks,
Krupa
I’ll send you an email address for direct Inova contact in a separate
email
Krupa wrote:
Hello,
We are trying to obtain the product id from Inova…The board has the
following printed on it : LP-PB-SER2-C.We are using ICP_CARR (Dual Piggy back carrier board) with IPB-SER (serial
communication piggybacks)
We had sent a copy of this query to Inova. We have not received any response
from them.Regards,
KrupaJutta Steinhoff <> j-steinhoff@web.de> > wrote in message
news:> 3BBC3FC4.93E3A756@web.de> …Krupa, ask your Inova distributor for product ID 12084 (Ser2) or 12085
(Ser1)
Krupa wrote:Hi,
We have recently purchased QNX-compatible CPCI based data
acquisition
cards, CPU card and serial cards of Inova make.BSP for QNX has been made available by the manufacturer. Due to
this,
the serial ports(2) present on the CPU card get detected by Dev.ser and
are
working fine. The system has 2 more serial ports on another CPCI card.
How
to configure those for use with QNX? Does Dev.ser look for presence of
PCI
serial cards in the system?Thanks,
Krupa
I’ll send you an email address for direct Inova contact in a separate
email
Krupa wrote:
Hello,
We are trying to obtain the product id from Inova…The board has the
following printed on it : LP-PB-SER2-C.We are using ICP_CARR (Dual Piggy back carrier board) with IPB-SER (serial
communication piggybacks)
We had sent a copy of this query to Inova. We have not received any response
from them.Regards,
KrupaJutta Steinhoff <> j-steinhoff@web.de> > wrote in message
news:> 3BBC3FC4.93E3A756@web.de> …Krupa, ask your Inova distributor for product ID 12084 (Ser2) or 12085
(Ser1)
Krupa wrote:Hi,
We have recently purchased QNX-compatible CPCI based data
acquisition
cards, CPU card and serial cards of Inova make.BSP for QNX has been made available by the manufacturer. Due to
this,
the serial ports(2) present on the CPU card get detected by Dev.ser and
are
working fine. The system has 2 more serial ports on another CPCI card.
How
to configure those for use with QNX? Does Dev.ser look for presence of
PCI
serial cards in the system?Thanks,
Krupa