TCP/IP on the Arcnet in QNX 4?

Hi All,

I would like to use TCP/IP program on the Arcnet in the QNX 4.
Would anybody let me know how we can setup IP address with the Arcnet driver
?

I have TPMC815 Arcnet adaptor (PCI Mezzanine Card(PMC))by TEWS DATENTECHNIK
GmbH (http://www.tews.com) and a driver called TPMC815. I know the driver
only supports a function Send() to send message and to get reply message.
We can setup the node ID with dip switch, and can also locate the process ID
of the driver process using qnx_name_locate(), but I don’t know what the
interface name is used to configure IP address. Normally Interface names
like en1, en2 are used for ethernet cards.

IS IT POSSIBLE TO USE THE TCP/IP ON THE ARCNET ON QNX4 ?

Anyone done this sort of thing before?

Yeongjin Kim

yjkim@bnftech.com

BNF Technology Inc.
Daejeon - South Korea
Off : +82-42-868 8775
WWW: www.bnftech.com

Hi Sunil,

Sunil Warke <sunil@bnftech.com> wrote:

Hi All,

I would like to use TCP/IP program on the Arcnet in the QNX 4.
Would anybody let me know how we can setup IP address with the Arcnet driver
?

I have TPMC815 Arcnet adaptor (PCI Mezzanine Card(PMC))by TEWS DATENTECHNIK
GmbH (> http://www.tews.com> ) and a driver called TPMC815. I know the driver
only supports a function Send() to send message and to get reply message.
We can setup the node ID with dip switch, and can also locate the process ID
of the driver process using qnx_name_locate(), but I don’t know what the
interface name is used to configure IP address. Normally Interface names
like en1, en2 are used for ethernet cards.

IS IT POSSIBLE TO USE THE TCP/IP ON THE ARCNET ON QNX4 ?

No it is not.

E.

Anyone done this sort of thing before?

Yeongjin Kim

yjkim@bnftech.com

BNF Technology Inc.
Daejeon - South Korea
Off : +82-42-868 8775
WWW: > www.bnftech.com