Intel 82562ET/EM support on QNX 4.25

QNX Newsgroups (Archives) qdn.public.qnx4
#1

Hello all,

I’m trying to get this network card to work under QNX 4.25, but it is not detected by nettrap or If try to run directly Net.ether82557 (the 82562EM is supposed to be supported by this driver).

Class = Network (Ethernet) Vendor ID = 8086h, INTEL CORPORATION Device ID = 2449h, PCI index = 0h MEM @ e4000000h IO @ c000h PCI Int Pin = INT A Interrupt line = 11

Is there a way to force the Net.ether82557 to use this card?

thank you for your help.

-Francis

Francis Provencher
Real-Time Application Specialist
mailto:francis.provencher@opal-rt.com
http://www.opal-rt.com

#2

It depends on what version of Net.ether82557 you have, but you could
try running the driver as ‘Net.ether82557 -V8086 -D2449 &’.

Previously, Francis Provencher wrote in qdn.public.qnx4:

Hello all,

I’m trying to get this network card to work under QNX 4.25, but it is not detected by nettrap or If try to run directly Net.ether82557 (the 82562EM is supposed to be supported by this driver).

start of show_pci include
Class = Network (Ethernet)
Vendor ID = 8086h, INTEL CORPORATION
Device ID = 2449h,
PCI index = 0h
MEM @ e4000000h IO @ c000h
PCI Int Pin = INT A
Interrupt line = 11
end of show_pci include

Is there a way to force the Net.ether82557 to use this card?

thank you for your help.

-Francis

Francis Provencher
Real-Time Application Specialist
mailto:> francis.provencher@opal-rt.com
http://www.opal-rt.com


\