Question for Connect Tech

QNX Newsgroups (Archives) qdn.public.qnx4
1

Hi Bert et al

I have a QNX 4.25E system with 2 CT-FE120 cards running at 100 MBps. The
command lines are:
Net.ct100tx -P -l1 -I1
Net.ct100tx -P -l2 -I0

My Net.ct100tx driver is:
Net.ct100tx 69278 Apr 26 2001

and they are using IRQs 9 & 15.

Now, if one of the ethernet cables is unplugged I get a very high error rate
on the other ethernet. Besides the obvious, “Don’t do that”, is there
something that I can do to prevent this problem?

2

Don’t you mean Corman?

“Bill Caroselli (Q-TPS)” wrote:

Hi Bert et al

I have a QNX 4.25E system with 2 CT-FE120 cards running at 100 MBps. The
command lines are:
Net.ct100tx -P -l1 -I1
Net.ct100tx -P -l2 -I0

My Net.ct100tx driver is:
Net.ct100tx 69278 Apr 26 2001

and they are using IRQs 9 & 15.

Now, if one of the ethernet cables is unplugged I get a very high error rate
on the other ethernet. Besides the obvious, “Don’t do that”, is there
something that I can do to prevent this problem?

3

Oops, yup!

Thanks Dean. I use both products. I just had a mental SIGSEGV.

“Dean Douthat” <ddouthat@faac.com> wrote in message
news:3CD0441D.5644C137@faac.com…

Don’t you mean Corman?

“Bill Caroselli (Q-TPS)” wrote:

Hi Bert et al

I have a QNX 4.25E system with 2 CT-FE120 cards running at 100 MBps.
The
command lines are:
Net.ct100tx -P -l1 -I1
Net.ct100tx -P -l2 -I0

My Net.ct100tx driver is:
Net.ct100tx 69278 Apr 26 2001

and they are using IRQs 9 & 15.

Now, if one of the ethernet cables is unplugged I get a very high error
rate
on the other ethernet. Besides the obvious, “Don’t do that”, is there
something that I can do to prevent this problem?

4

Bill Caroselli (Q-TPS) <QTPS@EarthLink.net> wrote:

Hi Bert et al

I have a QNX 4.25E system with 2 CT-FE120 cards running at 100 MBps. The
command lines are:
Net.ct100tx -P -l1 -I1
Net.ct100tx -P -l2 -I0

My Net.ct100tx driver is:
Net.ct100tx 69278 Apr 26 2001

and they are using IRQs 9 & 15.

Now, if one of the ethernet cables is unplugged I get a very high error rate
on the other ethernet. Besides the obvious, “Don’t do that”, is there
something that I can do to prevent this problem?

For problem solution you try to use driver Net.tulip.

Majo.