Touchscreen Help with QNX 4.24

QNX Newsgroups (Archives) qdn.public.qnx4
1

For those of us that are stuck with the older versions of QNX, it is getting
hard to replace components! :slight_smile:

Any and all help would be greatly appreciated. We have over 90 QNX
workstations here that use a Datalux Touchscreen. (Model LMV10R) Datalux no
longer makes these and when they refurbish them, they are made into a
LMV10R2. I need to start replacing a lot of these and am looking for a
touch screen that will work with QNX 4.24 and is similar in size. Any
ideas?

Thanks!

2

Try contacting Dolch (their web site is www.dolch.com), they have a touch screen that works with QNX4.


On Thu, 2 Jan 2003 11:37:23 -0500
“Chris McConnell” <Chris.McConnell@trw.com> wrote:

For those of us that are stuck with the older versions of QNX, it is getting
hard to replace components! > :slight_smile:

Any and all help would be greatly appreciated. We have over 90 QNX
workstations here that use a Datalux Touchscreen. (Model LMV10R) Datalux no
longer makes these and when they refurbish them, they are made into a
LMV10R2. I need to start replacing a lot of these and am looking for a
touch screen that will work with QNX 4.24 and is similar in size. Any
ideas?

Thanks!

3

We have been using the Elographics resistive touchscreen, which uses the
Smartset protocol, with QNX 4.24 and Photon 1.13 for a number of years, with
no significant problems. The only major issue has been that the resistive
touch surface, which is plastic, wears out and must be replaced every once
in a while.

“Chris McConnell” <Chris.McConnell@trw.com> wrote in message
news:av1p99$1fp$1@inn.qnx.com…

For those of us that are stuck with the older versions of QNX, it is
getting
hard to replace components! > :slight_smile:

Any and all help would be greatly appreciated. We have over 90 QNX
workstations here that use a Datalux Touchscreen. (Model LMV10R) Datalux
no
longer makes these and when they refurbish them, they are made into a
LMV10R2. I need to start replacing a lot of these and am looking for a
touch screen that will work with QNX 4.24 and is similar in size. Any
ideas?

Thanks!

4

If neither of these suggestions are suitable for you we could write a QNX 4
driver for the Touchscreen of your choice as a Custom Engineering project.
Or you could request a specific one be supported - we’ll consider it, based
on demand (if anyone esle requires it), and resource availability etc.

-Martin.

“Kevin Miller” <kevin.miller@transcore.com> wrote in message
news:avc89s$8lj$1@nntp.qnx.com…

We have been using the Elographics resistive touchscreen, which uses the
Smartset protocol, with QNX 4.24 and Photon 1.13 for a number of years,
with
no significant problems. The only major issue has been that the resistive
touch surface, which is plastic, wears out and must be replaced every once
in a while.

“Chris McConnell” <> Chris.McConnell@trw.com> > wrote in message
news:av1p99$1fp$> 1@inn.qnx.com> …
For those of us that are stuck with the older versions of QNX, it is
getting
hard to replace components! > :slight_smile:

Any and all help would be greatly appreciated. We have over 90 QNX
workstations here that use a Datalux Touchscreen. (Model LMV10R)
Datalux
no
longer makes these and when they refurbish them, they are made into a
LMV10R2. I need to start replacing a lot of these and am looking for a
touch screen that will work with QNX 4.24 and is similar in size. Any
ideas?

Thanks!
\