is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
“Patrick Pfister” <patrick.pfister@pup.ch> wrote in message
news:b1tp34$4bc$1@inn.qnx.com…
is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
pax -wf backup.tar -s",//,/," ///
gzip backup.tar
// wbr
sorry, I am actually looking for a backup solution like
ZIP, CD-RW, Dat or something similar…
thanks anyway!
Patrick
“Ian Zagorskih” <ianzag@megasignal.com> schrieb im Newsbeitrag
news:b1tpu3$5de$1@inn.qnx.com…
“Patrick Pfister” <> patrick.pfister@pup.ch> > wrote in message
news:b1tp34$4bc$> 1@inn.qnx.com> …
is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
\pax -wf backup.tar -s",//,/," ///
gzip backup.tar
// wbr
“Patrick Pfister” <patrick.pfister@pup.ch> wrote in mesage :
news:b1tp34$4bc$1@inn.qnx.com…
is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
Patrick,
IMHO Iomega ZIP250 (internal IDE) is a good choice.
Shr.
Zip parallel works for me, up to 250mb. Mitchell Schoenbrun sells a QNX 4
driver.
“Ian Zagorskih” <ianzag@megasignal.com> wrote in message
news:b1tpu3$5de$1@inn.qnx.com…
“Patrick Pfister” <> patrick.pfister@pup.ch> > wrote in message
news:b1tp34$4bc$> 1@inn.qnx.com> …
is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
\pax -wf backup.tar -s",//,/," ///
gzip backup.tar
// wbr
I’m using IOMEGA JAZ 2GB, but these are impossible to get (try ebay).
For backup, I now ftp the files to a windows machine and then burn them on
CD.
Augie
“Patrick Pfister” <patrick.pfister@pup.ch> wrote in message
news:b1tp34$4bc$1@inn.qnx.com…
is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
Previously, Patrick Pfister wrote in qdn.public.qnx4:
is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
I bought a 4-8GB SCSI tape drive off ebay for ~$20. Works great.
Of course if you don’t have a SCSI controller you’d have to buy
one. I also bought an Adaptec 2940UW controller off ebay for $10,
and that works great too. The tape cartridges cost ~$30/each.
So now I just backup the entire partition and don’t have to worry
about losing anything.
Tapes are a little slow, but I kick it off in the evening and it’s
done by the morning.
You can also get SCSI or IDE removable hard drives.
The 750M ZIP (internal IDE) also work fine.
“Shr” <shr_a@mail.ru> wrote in message news:b1ttlm$9r9$1@inn.qnx.com…
“Patrick Pfister” <> patrick.pfister@pup.ch> > wrote in mesage :
news:b1tp34$4bc$> 1@inn.qnx.com> …
is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
Patrick,IMHO Iomega ZIP250 (internal IDE) is a good choice.
Shr.
\
I’m using 3.5" MO 640MB
IDE and SCSI drives with up to 2.3GB are available.
Werner
“Patrick Pfister” <patrick.pfister@pup.ch> schrieb im Newsbeitrag
news:b1ttip$9ci$1@inn.qnx.com…
sorry, I am actually looking for a backup solution like
ZIP, CD-RW, Dat or something similar…
thanks anyway!
Patrick“Ian Zagorskih” <> ianzag@megasignal.com> > schrieb im Newsbeitrag
news:b1tpu3$5de$> 1@inn.qnx.com> …“Patrick Pfister” <> patrick.pfister@pup.ch> > wrote in message
news:b1tp34$4bc$> 1@inn.qnx.com> …
is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
\pax -wf backup.tar -s",//,/," ///
gzip backup.tar
// wbr
\
“Patrick Pfister” <patrick.pfister@pup.ch> wrote in message
news:b1ttip$9ci$1@inn.qnx.com…
sorry, I am actually looking for a backup solution like
ZIP, CD-RW, Dat or something similar…
thanks anyway!
Patrick
Sorry, Patrick, i didn’t understand yor question than 
Anyway, i usually just make a tar archive of the source system and burn it
on CD/RW (under Win2k of FreeBSD). Works fine and no problems with
unsupported hardware and so on.
// wbr
Btw. Hasn’t somebody used Flash disk on USB ?
Ken Schumm <kwschumm@IH8SPAMqsolv.com> wrote:
Previously, Patrick Pfister wrote in qdn.public.qnx4:
is there anybody, that could suggest a sensible (simple, not too big)
backup-system for a qnx4-machine (data < 200MB)?
thanks in advance
Patrick
I bought a 4-8GB SCSI tape drive off ebay for ~$20. Works great.
Of course if you don’t have a SCSI controller you’d have to buy
one. I also bought an Adaptec 2940UW controller off ebay for $10,
and that works great too. The tape cartridges cost ~$30/each.So now I just backup the entire partition and don’t have to worry
about losing anything.Tapes are a little slow, but I kick it off in the evening and it’s
done by the morning.You can also get SCSI or IDE removable hard drives.