How can I use all screen area?

I have installed QNX 4.25E on the Fujitsu-Siemens AmiloA notebook model. The
problem is that my working area takes up only a part of whole LCD display.
The same situation I encountered on the IBM ThinkPad 760C
and Compaq Armada 1753D model.

Some from new laptop’s have possibility to change display settings in BIOS
(LCD Display Stretch = Enabled/Disabled).

Unfortunatelly my BIOS hasn’t. Now I’m wondering on that…
Is there possible to use all screen area under QNX 4.25 in text mode?

Thank’s
Jacek

I have resolved screen size problem on the Compaq Armada 1753D notebook. The
solution was so easy - special keys combination: “Fn+T”.
But I can’t still to manage with whole screen initialization on the Fujitsu
and IBM laptops.

Is there any other method (except BIOS and keys combination) like special
function or programing trick to do that?

Maybe should I use int10 utility?

Regards,
Jacek

Jacek Rudnicki <jacek.rudnicki@quantum.com.pl> wrote:

I have resolved screen size problem on the Compaq Armada 1753D notebook. The
solution was so easy - special keys combination: “Fn+T”.
But I can’t still to manage with whole screen initialization on the Fujitsu
and IBM laptops.

Is there any other method (except BIOS and keys combination) like special
function or programing trick to do that?

Maybe should I use int10 utility?

AFAIK int10 supports QNX Windows GUI, nothing else. Andy

Regards,
Jacek