Dual Display Dilema in Photon 1.14

Greetings,

Trying to setup a multi-monitor display using the instructions posted on the
QNX Knowledge Base -

When creating my trap file using the following command:
…/Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor perform a Video
BIOS warm boot. - I don’t, in fact the trap returns fairly quickly and does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would not perform the
video BIOS warm boot?


Thanks,
Paul Wolcott

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


#! /bin/sh

set -x

General os and video information script

mkdir tmp
tempfile=“tmp/video_info.txt”

\

function declaration - syschk()

used to gather info via standard os utilities

and write the output to video_info file.

syschk () {
echo Output of: $1 >> $2
$1 >> $2
echo >> $2
}

echo "Starting script… "
echo "Please don’t touch the keyboard until the script is finished… "
echo “”

get time and date information

timestamp=$(date +%H+%M+%S)
datestamp=$(date +%y+m%d)

get the output from the various utilities

echo “Running the various ‘sin’ commands…\n”

syschk “sin” $tempfile
syschk “sin ver” $tempfile
syschk “sin in” $tempfile
syschk “sin ar” $tempfile

get the output from some video related commands

echo “Running some video utilities…\n”

syschk “show_pci -vvvvvv” $tempfile
syschk “/qnx4/graphics/bin/show_vesa” $tempfile
syschk “ls -l /qnx4/graphics/drivers/” $tempfile
syschk “ls -l /qnx4/graphics/trappers/” $tempfile
syschk “cat /etc/config/trap/crt.$NODE” $tempfile


echo "Script finished… "
echo “Please include the file ‘tmp/video_info.txt’ with your email to support.”



Paul Wolcott <paulw@apecusa.com> wrote:

Greetings,

Trying to setup a multi-monitor display using the instructions posted on the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor perform a Video
BIOS warm boot. - I don’t, in fact the trap returns fairly quickly and does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would not perform the
video BIOS warm boot?



Thanks,
Paul Wolcott

Michael,

Please find the attached file ‘video_info.txt’ that was created after
running your script.

Thanks,

Paul.


Michael Van Reenen <mvr@qnx.com> wrote in message
news:bhvrh1$91u$1@nntp.qnx.com

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


#! /bin/sh

set -x

General os and video information script

mkdir tmp
tempfile=“tmp/video_info.txt”

\

function declaration - syschk()

used to gather info via standard os utilities

and write the output to video_info file.

syschk () {
echo Output of: $1 >> $2
$1 >> $2
echo >> $2
}

echo "Starting script… "
echo "Please don’t touch the keyboard until the script is finished… "
echo “”

get time and date information

timestamp=$(date +%H+%M+%S)
datestamp=$(date +%y+m%d)

get the output from the various utilities

echo “Running the various ‘sin’ commands…\n”

syschk “sin” $tempfile
syschk “sin ver” $tempfile
syschk “sin in” $tempfile
syschk “sin ar” $tempfile

get the output from some video related commands

echo “Running some video utilities…\n”

syschk “show_pci -vvvvvv” $tempfile
syschk “/qnx4/graphics/bin/show_vesa” $tempfile
syschk “ls -l /qnx4/graphics/drivers/” $tempfile
syschk “ls -l /qnx4/graphics/trappers/” $tempfile
syschk “cat /etc/config/trap/crt.$NODE” $tempfile


echo "Script finished… "
echo “Please include the file ‘tmp/video_info.txt’ with your email to
support.”



Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the instructions posted on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor perform a
Video
BIOS warm boot. - I don’t, in fact the trap returns fairly quickly and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would not perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott

\

begin 666 video_info.txt
M3W5T<‘5T(&]F.B!S:6X4TE$(" @4$E$(%!23T=204T@(" @(" @(" @(" @
M(" @(%!222!35$%412 @($),2R @($-/1$4@("!$051!“B M+2 @(” M+2!-
M:6-R;VME<FYE;" @(" @(" @(" @(" M+2T@+2TM+2T@(" M+2T@(#$P-3(T
M(" @(" @, H@(# @(" @(#$@+V)O;W0O<WES+U!R;V,S,B @(" @(" @,S!F
M(%)%0419(" @+2TM(" @,3$X:R @(#(X-FL
(" P(" @(" R("]B;V]T+W-Y
M<R]3;&EB,S(@(" @(" @(#$P<B @4D5#5B @(" @," @(" U,VL@(" T,#DV
M"B @," @(" @-" O8FEN+T9S>7,@(" @(" @(" @(" @(" Q,’(@(%)%0U8@
M(" @(# @(" @-S=K(#$X-S,U:PH@(# @(" @(#4@+V)I;B]&<WES+F5I9&4@
M(" @(" @(" @,C)R("!214-6(" @(" P(" @(#8Q:R @(#$Q-&L*(" P(" @
M(" X(&ED;&4@(" @(" @(" @(" @(" @(" @(" P<B!214%$62 @(“TM+2 @
M(” @(# @(" @-#!K"B @," @(" Q-B O+S$O8FEN+T1E=C,R(" @(" @(" @
M(" R-&8@(%)%0U8@(" @(# @(" @,S)K(" @(#DX:PH@(# @(" @,C$@+R\Q
M+V)I;B]0:7!E(" @(" @(" @(" @,3!R("!214-6(" @(" P(" @(#$V:R @
M(" S,FL*(" P(" @(#(S("\O,2]B:6XO1&5V,S(N86YS:2 @(" @(#(P<B @
M4D5#5B @(" @," @(" T,&L@(" @.3!K"B @," @(" R-R O+S$O8FEN+T1E
M=C,R+G!A<B @(" @(" @.6@(%)%0U8@(" @(# @(" X,3DR(" @(#$V:PH@
M(# @(" @,C@@+R\Q+V)I;B]$978S,BYP=‘D@(" @(" @,C!R("!214-6(" @
M(" P(" @(#$R:R @(" U-VL*(" P(" @(#,R("\O,2]B:6XO1G-Y<RYE:61E
M(" @(" @(#(R<B @4D5#5B @(" @," @(" V,6L@(" Q,31K"B @," @(" S
M-B O+S$O8FEN+T9S>7,N9FQO<’!Y(" @(" Q,&@(%)%0U8@(" @(# @(" @
M,C!K(" @(#0P:PH@(# @(" @,S<@+R\Q+V)I;B])<V\Y-C8P9G-Y<R @(" @
M,3!O("!214-6(" @(" P(" @(#(X:R @(" U-VL*(" P(" @(#0P("\O,2]B
M:6XO;F%M96QO8R @(" @(" @(#(P;R @4D5#5B @(" @," @(#8Q-#0@(" @
M,C1K"B @," @(" T,2 O+S$O8FEN+VYA;65L;V,@(" @(" @(" R,&@4D50
M3%D@(" S,34@(" V,30T(" @(#$V:PH@(# @(" @-#0@+R\Q+V)I;B].970@
M(" @(" @(" @(" @,C-R("!214-6(" @(" P(" @(#,R:R @(" W,VL*(" P
M(" @(#0X("\O,2]B:6XO3F5T+F5T:&5R.3 U(" @(#(P<B @4D5#5B @(" @
M," @(" T-6L@(" @.#9K"B @," @(" U-2 O+S$O8FEN+W1I;FET(" @(" @
M(" @(" Q,&@(%=!250@(" @+3$@(" X,3DR(" @(#(X:PH@(# @(" @-38@
M+R\Q+V)I;B]T:6YI=" @(" @(" @(" @,3!O("!704E4(" @(“TQ(” @.#$Y
M,B @(" R.&L*(" P(" @(#4Y("\O,2]B:6XO36]U<V4@(" @(" @(" @(#$P
M;R @4D5#5B @(" @," @(" Q-FL@(" @,C!K"B @," @(" V,R O+S$O8FEN
M+TEN<‘5T(" @(" @(" @(" Q,F@(%)%0U8@(" @(# @(" @,S)K(" @(#(X
M:PH@(# @(" @-C4@+R\Q+V)I;B]);G!U=" @(" @(" @(" @,3!O("!214-6
M(" @(" P(" @(#,R:R @(" R.&L*(" Q(" @(#<P("\O,2]B:6XO:W-H(" @
M(" @(" @(" @(#$P;R @5T%)5" @(" M,2 @(" T-VL@(" @-#5K"B @,B @
M(" X-2 O+S$O8FEN+VMS:" @(" @(" @(" @(" Q,&@4D503%D@(" @,38@
M(" @-#=K(" @(#0U:PH@(#$@(" R,C@@+R\Q+V)I;B]&871F<WES(" @(" @
M(" @,3!O("!214-6(" @(" P(" @(#8U:R @(" V,6L*(" Q(" @,S$V("]B
M:6XO<V@@(" @(" @(" @(" @(" @(#$P;R @5T%)5" @(" M,2 @(" Y-&L@
M(" @,S9K"B @,2 @(#,R,B O+S$O8FEN+W-I;B @(" @(" @(" @(" Q,&@
M4D503%D@(" @(#$@(" @-#5K(" @(#0Y:PH3W5T<'5T(&]F.B!S:6X@=F5R
M"E!23T=204T@(" @(" @(" @(" @(" @($Y!344@(" @(" @("!615)324].
M($1!5$4
+V)O;W0O<WES+U!R;V,S,B @(" @(" @4’)O8R @(" @(" @(#0N
M,C5,(" @1F5B(#$U(#(P,#$+V)O;W0O<WES+U!R;V,S,B @(" @(" @4VQI
M8C$V(" @(" @(#0N,C-’(" @3V-T(# T(#$Y.38
+V)O;W0O<WES+U-L:6(S
M,B @(" @(" @4VQI8C,R(" @(" @(#0N,C1"(" @075G(#$R(#$Y.3<+V)I
M;B]&<WES(" @(" @(" @(" @(" @1G-Y<S,R(" @(" @(#0N,C16(" @1F5B
M(#$X(#(P,# +V)I;B]&<WES(" @(" @(" @(" @(" @1FQO<’!Y(" @(" @
M(#0N,C1"(" @075G(#$Y(#$Y.3<
+V)I;B]&<WES+F5I9&4@(" @(" @(" @
M96ED92 @(" @(" @(#0N,C5!(" @1F5B(# Y(#(P,# +R\Q+V)I;B]$978S
M,B @(" @(" @(" @1&5V,S(@(" @(" @(#0N,C-’(" @3V-T(# T(#$Y.38

M+R\Q+V)I;B]0:7!E(" @(" @(" @(" @4&EP92 @(" @(" @(#0N,C-!(" @
M1F5B(#(V(#$Y.38
+R\Q+V)I;B]$978S,BYA;G-I(" @(" @1&5V,S(N86YS
M:2 @(#0N,C-((" @3F]V(#(Q(#$Y.38*+R\Q+V)I;B]$978S,BYP87(@(" @
M(" @1&5V,S(N<&%R(" @(#0N,C5!(" @2F%N(# X(#(P,#$+R\Q+V)I;B]$
M978S,BYP='D@(" @(" @1&5V,S(N<‘1Y(" @(#0N,C-’(" @3V-T(# T(#$Y
M.38
+R\Q+V)I;B]&<WES+F5I9&4@(" @(" @96ED92 @(" @(" @(#0N,C5!
M(" @1F5B(# Y(#(P,# +R\Q+V)I;B])<V\Y-C8P9G-Y<R @(" @27-O.38V
M,&9S>7,@(#0N,C-$(" @36%R(#(P(#(P,# +R\Q+V)I;B].970@(" @(" @
M(" @(" @3F5T(" @(" @(" @(#0N,C5#(" @075G(#,P(#$Y.3D
+R\Q+V)I
M;B].970N971H97(Y,#4@(" @3F5T+F5T:&5R.3 U(#0N,C1+(" @2F%N(# Y
M(#(P,#$
+R\Q+V)I;B]-;W5S92 @(" @(" @(" @36]U<V4@(" @(" @(#0N
M,C1!(" @075G(#(R(#$Y.3<+R\Q+V)I;B]&871F<WES(" @(" @(" @1F%T
M9G-Y<R @(" @(#0N,C9!(" @36%R(#(W(#(P,# “D]U=’!U=”!O9CH@<VEN
M(&EN"B!.;V1E(" @($-052 @("!-86-H:6YE(%-P965D(" @("!-96UO<GD@
M(" @5&EC:W-I>F4@("!$:7-P;&%Y(" @(" @(" @(" @1FQA9W,
(" @(#$@
M(#8X-B\V.#<@(" @("!00TD@,3@W-C8@(" Q,#E-+S$S,$T@(" Q,“XP;7,@
M(”!61T$@0V]L;W(@+3-0
RTM+2TM+2TM+2TX4 H2&5A<’ @2&5A<&8@2&5A
M<&P@2&5A<&X@2&%N9’,@3F%M97,@4V5S<VEO;G,@4’)O8W,@5&EM97)S($YO
M9&5S(%9I<G1U86P
(" @(# @(" @(# @,C(W-C@@(" @(# @(" @-C0@(" Q
M,# @(" @(" @-C0@(" U,# @(" @,3(U(" @(" R(" @(#<R32@(#$T,DT*
M"D)O;W0@9G)O;2 @2&%R9"!A="!!<’(@,C<@,#0Z,#(@("!,;V-A=&]R<SH@
M,0H3W5T<'5T(&]F.B!S:6X@87(("!0240@55-%4B!.04U%(" @($%21U5-
M14Y44PH@(" @,2!3>7-T96T@(" @(" @+V)O;W0O<WES+U!R;V,S,B M;" Q
M( H@(" @,B!3>7-T96T@(" @(" @+V)O;W0O<WES+U-L:6(S,B (" @(#0@
M4WES=&5M(" @(" @("]B:6XO1G-Y<R (" @(#4@4WES=&5M(" @(" @("]B
M:6XO1G-YRYE:61E(&9S7,@+4YD<VLP(“UN,#UH9# N(“UN-3UC9# N(&5I
M9&4@+6$Q9C @+6DQ-” (" @(#@@4WES=&5M(" @(" @($YO="!A=F%I;&%B
M;&4N(" @(" @(" @(" @(" @(" @“B @(#$V(%-Y<W1E;2 @(” @("!$978@
M"B @(#(Q(%-Y<W1E;2 @(" @("!0:7!E( H@(" R,R!3>7-T96T@(" @(" @
M1&5V+F%N<VD@+5$@+6XV( H@(" R-R!3>7-T96T@(" @(" @1&5V+G!A<B *
M(" @,C@@4WES=&5M(" @(" @($1E=BYP='D@+6XQ-B (" @,S(@4WES=&5M
M(" @(" @("]B:6XO1G-YRYE:61E(&9S7,@+4YD<VLQ(“UN,#UH9#$N(“UN
M-3UC9#$N(&5I9&4@+6$Q-S @+6DQ-2 (" @,S8@4WES=&5M(" @(" @("]B
M:6XO1G-Y<RYF;&]P<'D@+6$S9C @+6DV( H@(" S-R!3>7-T96T@(" @(" @
M+V)I;B])<V\Y-C8P9G-Y<R O8V0Q+C @“B @(#0P(%-Y<W1E;2 @(” @("!N
M86UE;&]C( H@(" T,2!3>7-T96T@(" @(" @;F%M96QO8R (" @-#0@4WES
M=&5M(" @(" @($YE=" (" @-#@@4WES=&5M(" @(" @($YE=“YE=&AE<CDP
M-2 M<#9C,# @+6DQ,” M23 @+6PQ( H@(" U-2!3>7-T96T@(" @(" @=&EN
M:70@+70@+V1E=B]C;VXQ( H@(" U-B!3>7-T96T@(" @(" @=&EN:70@+50@
M+V1E=B]C;VXR("]D978O8V]N,R O9&5V+V-O;C0@+V1E=B]C;VXU("]D978O
M8V]N-B (" @-3D@4WES=&5M(" @(" @($UO=7-E( H@(" V,R!3>7-T96T@
M(" @(" @26YP=70@+60O9&5V+VUO=7-E:6X@<’,R(“UR(&MB(“TR( H@(” V
M-2!3>7-T96T@(” @(" @26YP=70@+60O9&5V+VUO=7-E:6X@<’,R(“UR(&MB
M(“TR( H@(” W,”!R;V]T(" @(" @(" @+7-H( H@(" X-2!R;V]T(" @(" @
M(" @+7-H( H@(#(R."!R;V]T(" @(" @(" @1F%T9G-Y<R (" S,38@<F]O
M=" @(" @(" @("]B:6XO<V@@+R\Q+W9I9&D@“B @,S(U(’)O;W0@(” @(" @
M("!S:6X@87(@"@I/=71P=70@;V8Z(’-H;W=?<&-I("UV=G9V=G8
"E!#22!V
M97)S:6]N(" @(#T@,BXQ, H
5F5N9&]R($E$(" @(" @/2 Q,3 V:“P@5DE!
M(%1E8VAN;VQO9VEE<PI$979I8V4@240@(” @(" ](#8Y,6@L( I00TD@:6YD
M97@@(" @(" ](#!H"D-L87-S($-O9&4@(" @(#T@,#8P,# P:"!"<FED9V4@
M
$AO<W0O4$-)2!0<F]G248], I2979I<VEO;B!)1" @(" ](&,T: I"=7,@
M;G5M8F5R(" @(" ](# 1&5V:6-E(&YU;6)E<B @/2 P"D9U;F-T:6]N(&YU
M;2 @(#T@, I3=&%T=7,@4F5G(" @(" ](#(R,3!H"D-O;6UA;F0@4F5G(" @
M(#T@-F@2&5A9&5R('1Y<&4@(" @/2 P:"!3:6YG;&4M9G5N8W1I;VX0DE3
M5" @(" @(" @(" @/2 P:"!"=6EL9"UI;BUS96QF+71E<W0@;F]T(’-U<’!O
M<G1E9 I,871E;F-Y(%1I;65R(" ](#AH"D-A8VAE($QI;F4@4VEZ93T@,&@@
M"D)A<V4@061D<F5S<R @(#T@345-0&8X,# P,# P:“Q0<F5F971C:&%B;&4L
M,S)B:70@;&5N9W1H(#8W,3 X.#8T"DUA>”!,870@(" @(" @(#T@,&YS"DUI
M;B!’;G0@(" @(" @(#T@,&YS"E!#22!);G0@4&EN(" @(#T@, I00TD@26YT
M(%!I;B @(" ]($Y#“DEN=&5R<G5P=”!L:6YE(#T@, H
1&5V:6-E($1E<&5N
M9&5N="!296=I<W1E<G,Z"C!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,‘AF8R P>&1E(#!X8S@@,’@Y
M82 P># T(#!X,# @,’@P." P># X( HP>#@P(#!X,# @,’@P-" P># X(#!X
M,#@@,’@P." P># X(#!X,#@@,‘AF9B P>#)A(#!X,# @,‘AE," P>&4V(#!X
M,# @"C!X,# @,’@P," P># S(#!X,C @,’@X,2 P># Q(#!X,# @,’@R,2 P
M># P(#!X,# @,‘AC," P>#@X(#!X96,@,’@P8R ,’@P." P>#@Q(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P9B P># P( HP># P(#!X,# @,‘AC," P># P(#!X,# @,’@P," P># R
M(#!X,# @,’@P," P># P(#!X8S8@,’@P," P># P(#!X,# @“C!X,# @,’@P
M,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,#(@,‘AC," P>#(P(#!X
M,# @,’@P,R P># R(#!X,# @,’@Q9B P># P(#!X,# @,’@P," P># P( HP
M>#8Y(#!X,# @,’@P," P># P(#!X8F8@,’@V,R P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @
M,’@P," P># P(#!X,#$@,’@P," P># R(#!X,# @,’@P," P># P(#!X,# @
M,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,#$@,’@P," ,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,#(@,’@P," P># P(#!X,# @,’@P," *
M"E9E;F1O<B!)1" @(" @(#T@,3$P-F@L(%9)02!496-H;F]L;V=I97,1&5V
M:6-E($E$(" @(" @/2 X-3DX:“P@“E!#22!I;F1E>” @(” @(#T@,&@0VQA
M<W,@0V]D92 @(" @/2 P-C T,#!H($)R:61G92 H4$-)+U!#22D@4’)O9TE&
M/3 4F5V:7-I;VX@240@(" @/2 P: I"=7,@;G5M8F5R(" @(" ](# 1&5V
M:6-E(&YU;6)E<B @/2 Q"D9U;F-T:6]N(&YU;2 @(#T@, I3=&%T=7,@4F5G
M(" @(" ](#(R,S!H"D-O;6UA;F0@4F5G(" @(#T@,&@2&5A9&5R('1Y<&4@
M(" @/2 Q:"!3:6YG;&4M9G5N8W1I;VX
0DE35" @(" @(" @(" @/2 P:"!"
M=6EL9"UI;BUS96QF+71E<W0@;F]T(’-U<’!O<G1E9 I,871E;F-Y(%1I;65R
M(" ](#!H"D-A8VAE($QI;F4@4VEZ93T@,&@@“E!R:6UA<GD@0G5S($YU;6)E
M<B @(” @(" ](#!H"E-E8V]N9&%R>2!"=7,@3G5M8F5R(" @(" ](#%H"E-U
M8F]R9&EN871E($)U<R!.=6UB97(@(" ](#%H"E-E8V]N9&%R>2!,871E;F-Y
M(%1I;65R(" ](#!H"DDO3R!“87-E(” @(" @(" @(" @(" @(" ](&8P: I)
M+T@3&EM:70@(" @(" @(" @(" @(" @/2 P: I396-O;F1A<GD@4W1A=‘5S
M(" @(" @(" @/2 P: I-96UO<GD@0F%S92 @(" @(" @(" @(" @/2!F9F8P
M: I-96UO<GD@3&EM:70@(" @(" @(" @(" @/2 P: I0<F5F971C:&%B;&4@
M365M;W)Y($)A<V4@/2!F9F8P: I0<F5F971C:&%B;&4@365M;W)Y($QI;6ET
M/2 P: I0<F5F971C:&%B;&4@0F%S92!5<’!E<B S,B!":71S(" ](#!H"E!R
M969E=&-H86)L92!,:6UI="!5<’!E<B S,B!":71S(#T@,&@22]/($)A<V4@
M57!P97(@,38@0FET<R @(#T@,&@22]/($QI;6ET(%5P<&5R(#$V($)I=’,@
M(#T@,&@0G)I9&=E($-O;G1R;VP@(" @(" @(" @(#T@,&YS"E!#22!);G0@
M4&EN(" @(" @(" @(" @(" ](# 4$-)($EN="!0:6X@(" @(" @(" @(" @
M(#T@3D,26YT97)R=7!T(&QI;F4@(" @(" @(" @(#T@, H17AP86YS:6]N
M(%)/32 @/2 X,&@@(&QE;F=T:" M,C$T-S0X,S8T."!D:7-A8FQE9 H
1&5V
M:6-E($1E<&5N9&5N="!296=I<W1E<G,Z"C!X,# @,’@P," P># T(#!X,# @
M,‘AE." P>#5C(#!X-3 @,’@P," P># P(#!X-S(@,’@P," P># P(#!X,# @
M,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P,2 P># P( HP># R(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M"C!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," “E9E;F1O<B!)1” @(" @(#T@,3$P-F@L(%9)02!496-H;F]L
M;V=I97,1&5V:6-E($E$(" @(" @/2 U.39H+" 4$-)(&EN9&5X(" @(" @
M/2 P: I#;&%S<R!#;V1E(" @(" ](# V,#$P,&@@0G)I9&=E("A00TDO25-!
M
2!0<F]G248], I2979I<VEO;B!)1" @(" ](#$R: I"=7,@;G5M8F5R(" @
M(" ](# 1&5V:6-E(&YU;6)E<B @/2 R"D9U;F-T:6]N(&YU;2 @(#T@, I3
M=&%T=7,@4F5G(" @(" ](#(P,&@0V]M;6%N9"!296<@(" @/2 X-V@2&5A
M9&5R(‘1Y<&4@(" @/2 P:"!-=6QT:2UF=6YC=&EO;@I"25-4(" @(" @(" @
M(" ](#!H($)U:6QD+6EN+7-E;&8M=&5S="!N;W0@<W5P<&]R=&5D"DQA=&5N
M8WD@5&EM97(@(#T@,&@0V%C:&4@3&EN92!3:7IE/2 P:" “DUA>”!,870@
M(" @(" @(#T@,&YS"DUI;B!’;G0@(" @(" @(#T@,&YS"E!#22!);G0@4&EN
M(" @(#T@, I00TD@26YT(%!I;B @(" ]($Y#“DEN=&5R<G5P=”!L:6YE(#T@
M, H
1&5V:6-E($1E<&5N9&5N="!296=I<W1E<G,Z"C!X,# @,’@P," P># P
M(#!X,# @,’@P," P>#(Q(#!X,# @,‘AD," P># P(#!X,# @,’@P," P>&5E
M(#!X,#$@,’@P," ,’@P-" P># P(#!X,# @,’@P," P># P(#!X9C,@,’@R
M-" P># P(#!X,# @,’@P," P># P(#!X,# @,‘AA.2 P>&(P( HP># P(#!X
M,#4@,‘AF-" P># X(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># X(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," *
M,’@P,2 P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P( HP>#4P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @
M,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," “E9E;F1O<B!)1” @(" @(#T@,3$P-F@L(%9)02!4
M96-H;F]L;V=I97,1&5V:6-E($E$(" @(" @/2 U-S%H+" 4$-)(&EN9&5X
M(" @(" @/2 P: I#;&%S<R!#;V1E(" @(" ](# Q,#$X86@@36%S<R!3=&]R
M86=E(“A)1$4I(%!R;V=)1CTQ,S@4F5V:7-I;VX@240@(" @/2 V: I"=7,@
M;G5M8F5R(" @(" ](# 1&5V:6-E(&YU;6)E<B @/2 R"D9U;F-T:6]N(&YU
M;2 @(#T@,0I3=&%T=7,@4F5G(" @(" ](#(X,&@0V]M;6%N9"!296<@(" @
M/2 X-6@2&5A9&5R('1Y<&4@(" @/2 P:"!3:6YG;&4M9G5N8W1I;VX0DE3
M5" @(" @(" @(" @/2 P:"!"=6EL9"UI;BUS96QF+71E<W0@;F]T(’-U<’!O
M<G1E9 I,871E;F-Y(%1I;65R(" ](#(P: I#86-H92!,:6YE(%-I>F4](#!H
M( H@24] 9F9F,&@@;&5N9W1H(#$V(&)Y=&5S"DUA>"!,870@(" @(" @(#T@
M,&YS"DUI;B!’;G0@(" @(" @(#T@,&YS"E!#22!);G0@4&EN(" @(#T@, I0
M0TD@26YT(%!I;B @(" ]($Y#“DEN=&5R<G5P=”!L:6YE(#T@;F@8V]N;F5C
M=&EO;@H
1&5V:6-E($1E<&5N9&5N="!296=I<W1E<G,Z"C!X9F8@,’@P," P
M># P(#!X,# @,’@P8B P># R(#!X,#D@,’@S82 P>#8X(#!X,3 @,‘AC," P
M># P(#!X83@@,’@R," ,‘AA." P>#(P(#!X9F8@,’@P," P>&9F(#!X9F8@
M,’@P," P># P(#!X,#@@,‘AE,B P># T(#!X,# @,’@P," P># P( HP>&$X
M(#!X83@@,‘AA." P>&$X(#!X,# @,’@P," P># P(#!X,# @,’@P," P># R
M(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,#(@,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P,B P># Q(#!X,# @,’@P
M," ,’@P," P># P(#!X,# @,’@P," P># R(#!X,#$@,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X
M,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,#8@,’@P," P>#<Q(#!X,#4@,’@P," P
M># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," “E9E;F1O<B!)1” @(" @(#T@,3$P-F@L(%9)
M02!496-H;F]L;V=I97,1&5V:6-E($E$(" @(" @/2 S,#,X:“P@“E!#22!I
M;F1E>” @(” @(#T@,&@0VQA<W,@0V]D92 @(" @/2 P8S S,#!H(%-E<FEA
M;"!"=7,@
%5N:79E<G-A;"!397)I86P@0G5S
2!0<F]G248], I2979I<VEO
M;B!)1" @(" ](#AH"D)U<R!N=6UB97(@(" @(#T@, I$979I8V4@;G5M8F5R
M(" ](#(1G5N8W1I;VX@;G5M(" @/2 R"E-T871U<R!296<@(" @(#T@,C P
M: I#;VUM86YD(%)E9R @(" ](#!H"DAE861E<B!T>7!E(" @(#T@,&@@4VEN
M9VQE+69U;F-T:6]N"D))4U0@(" @(" @(" @(#T@,&@@0G5I;&0M:6XM<V5L
M9BUT97-T(&YO="!S=7!P;W)T960
3&%T96YC>2!4:6UE<B @/2 Q-F@0V%C
M:&4@3&EN92!3:7IE/2 P:" ($E/0&9C93!H(&QE;F=T:" S,B!B>71E7-T96T@5F5N9&]R($E$(#T@.3(U: I3=6)S>7-T96T@240@(" @(" @
M(#T@,3(S-&@36%X($QA=" @(" @(" @/2 P;G,36EN($=N=" @(" @(" @
M/2 P;G,4$-)($EN="!0:6X@(" @/2 T"E!#22!);G0@4&EN(" @(#T@24Y4
M($0
26YT97)R=7!T(&QI;F4@/2 Q,0H
1&5V:6-E($1E<&5N9&5N="!296=I
M<W1E<G,Z"C!X,&(@,’@P-" P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P>&,V(#!X,# @,’@S," P>#!C(#!X,# @,’@P," ,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@Q," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @
M,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@R," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," “E9E;F1O<B!)
M1” @(" @(#T@,3$P-F@L(%9)02!496-H;F]L;V=I97,1&5V:6-E($E$(" @
M(" @/2 S,#4P:“P@“E!#22!I;F1E>” @(” @(#T@,&@0VQA<W,@0V]D92 @
M(" @/2 P-C P,#!H($)R:61G92 H2&]S="]00TDI(%!R;V=)1CTP"E)E=FES
M:6]N($E$(" @(#T@,C!H"D)U<R!N=6UB97(@(" @(#T@, I$979I8V4@;G5M
M8F5R(" ](#(1G5N8W1I;VX@;G5M(" @/2 S"E-T871U<R!296<@(" @(#T@
M,C@P: I#;VUM86YD(%)E9R @(" ](#!H"DAE861E<B!T>7!E(" @(#T@,&@@
M4VEN9VQE+69U;F-T:6]N"D))4U0@(" @(" @(" @(#T@,&@@0G5I;&0M:6XM
M<V5L9BUT97-T(&YO="!S=7!P;W)T960
3&%T96YC>2!4:6UE<B @/2 P: I#
M86-H92!,:6YE(%-I>F4](#!H( H
36%X($QA=" @(" @(" @/2 P;G,36EN
M($=N=" @(" @(" @/2 P;G,4$-)($EN="!0:6X@(" @/2 P"E!#22!);G0@
M4&EN(" @(#T@3D,26YT97)R=7!T(&QI;F4@/2 P"@I$979I8V4@1&5P96YD
M96YT(%)E9VES=&5R<SH
,’@P," P># P(#!X,# @,’@P," P>#(P(#!X.# @
M,’@T.2 P># P(#!X,6$@,’@U," P># P(#!X,# @,’@P,2 P>&8X( HP># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P>#!B(#!X,64@,‘AF9B P># P
M(#!X.# @,’@P," P># P(#!X,# @“C!X,# @,‘AF9B P>&9F(#!X,# @,’@P
M,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P,2 P>&9E
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X
M,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,#$@,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( H

M5F5N9&]R($E$(" @(" @/2 Q,# R:"P@051)(%1%0TA.3TQ/1TE%4R!)3D,

M1&5V:6-E($E$(" @(" @/2 U,34Y:“P@“E!#22!I;F1E>” @(” @(#T@,&@

M0VQA<W,@0V]D92 @(" @/2 P,S P,#!H($1I<W!L87D@
%9’02D@4’)O9TE&
M/3 4F5V:7-I;VX@240@(" @/2 P: I"=7,@;G5M8F5R(" @(" ](# 1&5V
M:6-E(&YU;6)E<B @/2 Q- I&=6YC=&EO;B!N=6T@(" ](# 4W1A='5S(%)E
M9R @(" @/2 R.3!H"D-O;6UA;F0@4F5G(" @(#T@83=H"DAE861E<B!T>7!E
M(" @(#T@,&@@4VEN9VQE+69U;F-T:6]N"D))4U0@(" @(" @(" @(#T@,&@@
M0G5I;&0M:6XM<V5L9BUT97-T(&YO="!S=7!P;W)T960
3&%T96YC>2!4:6UE
M<B @/2 T,&@0V%C:&4@3&EN92!3:7IE/2 X:"!U;BUC86-H96%B;&40F%S
M92!!9&1R97-S(" @/2!-14U 93@P,# P,#!H+%!R969E=&-H86)L92PS,F)I
M="!L96YG=&@@,3,T,C$W-S(X($E/0#<P,#!H(&QE;F=T:" R-38@8GET97,@
M345-0&9E8F4P,# P:“PS,F)I=”!L96YG=&@@-C4U,S8
4W5B<WES=&5M(%9E
M;F1O<B!)1" ](#$P,#)H"E-U8G-Y<W1E;2!)1" @(" @(" @/2!B: I-87@@
M3&%T(" @(" @(" ](#!N<PI-:6X@1VYT(" @(" @(" ](#AN<PI00TD@26YT
M(%!I;B @(" ](#$4$-)($EN="!0:6X@(" @/2!)3E0@00I);G1E<G)U<'0@
M;&EN92 ](&YO(&-O;FYE8W1I;VX
"D1E=FEC92!$97!E;F1E;G0@4F5G:7-T
M97)S.@HP>&9F(#!X,#$@,’@P." P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># R
M(#!X,3 @,’@P8B P># P(#!X,#$@,’@P," P># R(#!X,#8@,’@P," P># P
M(#!X,# @,’@P," ,’@P,B P>#4P(#!X,C @,’@P," P># P(#!X,#(@,’@P
M," P>#)F(#!X,# @,’@P,B P># P(#!X,# @,’@P," P># P( HP># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," *
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @
M,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @"@I696YD;W(@240@
M(" @(" ](#$P8C=H+" S0V]M"D1E=FEC92!)1" @(" @(#T@.3(P,&@L( I0
M0TD@:6YD97@@(" @(" ](#!H"D-L87-S($-O9&4@(" @(#T@,#(P,# P:"!.
M971W;W)K(“A%=&AE<FYE=“D@4’)O9TE&/3 4F5V:7-I;VX@240@(" @/2 W
M.&@0G5S(&YU;6)E<B @(" @/2 P"D1E=FEC92!N=6UB97(@(#T@,341G5N
M8W1I;VX@;G5M(" @/2 P"E-T871U<R!296<@(" @(#T@,C$P: I#;VUM86YD
M(%)E9R @(" ](#$P-V@2&5A9&5R('1Y<&4@(" @/2 P:"!3:6YG;&4M9G5N
M8W1I;VX
0DE35" @(" @(" @(" @/2 P:"!"=6EL9"UI;BUS96QF+71E<W0@
M;F]T(’-U<’!O<G1E9 I,871E;F-Y(%1I;65R(" ](#(P: I#86-H92!,:6YE
M(%-I>F4](#AH(‘5N+6-A8VAE86)L90I"87-E($%D9’)E<W,@(" ]($E/0#9C
M,#!H(&QE;F=T:" Q,C@@8GET97,@345-0&9E8F1F9C@P:“PS,F)I=”!L96YG
M=&@@,3(X"E-U8G-Y<W1E;2!696YD;W(@240@/2 Q,&(W: I3=6)S>7-T96T@
M240@(" @(" @(#T@,3 P,&@36%X($QA=" @(" @(" @/2 Q,&YS"DUI;B!’
M;G0@(" @(" @(#T@,3!N<PI00TD@26YT(%!I;B @(" ](#$4$-)($EN="!0
M:6X@(" @/2!)3E0@00I);G1E<G)U<'0@;&EN92 ](#$P"@I$979I8V4@1&5P
M96YD96YT(%)E9VES=&5R<SH
,’@P82 P># Q(#!X,&$@,’@P82 P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M"C!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P
M># P(#!X,# @,’@P," P># P(#!X,#$@,’@P," P># R(#!X9F4@,’@P," P
M>#0Q(#!X,# @,‘AB-R ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M( H
5F5N9&]R($E$(" @(" @/2 Q,# R:“P@051)(%1%0TA.3TQ/1TE%4R!)
M3D,1&5V:6-E($E$(" @(" @/2 U,34Y:“P@“E!#22!I;F1E>” @(” @(#T@
M,6@0VQA<W,@0V]D92 @(" @/2 P,S P,#!H($1I<W!L87D@%9’02D@4’)O
M9TE&/3 4F5V:7-I;VX@240@(" @/2 P: I"=7,@;G5M8F5R(" @(" ](# *
M1&5V:6-E(&YU;6)E<B @/2 Q-@I&=6YC=&EO;B!N=6T@(" ](# 4W1A='5S
M(%)E9R @(" @/2 R.3!H"D-O;6UA;F0@4F5G(" @(#T@.#!H"DAE861E<B!T
M>7!E(" @(#T@,&@@4VEN9VQE+69U;F-T:6]N"D))4U0@(" @(" @(" @(#T@
M,&@@0G5I;&0M:6XM<V5L9BUT97-T(&YO="!S=7!P;W)T960
3&%T96YC>2!4
M:6UE<B @/2 P: I#86-H92!,:6YE(%-I>F4](#!H( I"87-E($%D9’)E<W,@
M(" ]($U%34!F,# P,# P,&@L4’)E9F5T8VAA8FQE+#,R8FET(&QE;F=T:" Q
M,S0R,3<W,C@@24] -S0P,&@@;&5N9W1H(#(U-B!B>71E<R!-14U 9F5B9C P
M,#!H+#,R8FET(&QE;F=T:" V-34S-@I3=6)S>7-T96T@5F5N9&]R($E$(#T@
M,3 P,F@4W5B<WES=&5M($E$(" @(" @(" ](&)H"DUA>"!,870@(" @(" @
M(#T@,&YS"DUI;B!’;G0@(" @(" @(#T@.&YS"E!#22!);G0@4&EN(" @(#T@
M,0I00TD@26YT(%!I;B @(" ]($E.5"!!“DEN=&5R<G5P=”!L:6YE(#T@;F@
M8V]N;F5C=&EO;@H
1&5V:6-E($1E<&5N9&5N="!296=I<W1E<G,Z"C!X9F8@
M,’@P,2 P># X(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,#(@,’@Q," P>#!B
M(#!X,# @,’@P,2 P># P(#!X,#(@,’@P-B P># P(#!X,# @,’@P," P># P
M( HP># R(#!X-3 @,’@R," P># P(#!X,# @,’@P,B P># P(#!X,F8@,’@P
M," P># R(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P
M,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," “E9E;F1O<B!)1” @(" @(#T@,3(U
M9&@L( I$979I8V4@240@(" @(" ](#$Y.#AH+" 4$-)(&EN9&5X(" @(" @
M/2 P: I#;&%S<R!#;V1E(" @(" ](# T,#$P,&@@375L=&EM961I82 H075D
M:6\I(%!R;V=)1CTP"E)E=FES:6]N($E$(" @(#T@,3!H"D)U<R!N=6UB97(@
M(" @(#T@, I$979I8V4@;G5M8F5R(" ](#$X"D9U;F-T:6]N(&YU;2 @(#T@
M, I3=&%T=7,@4F5G(" @(" ](#(Y,&@0V]M;6%N9"!296<@(" @/2 U: I(
M96%D97(@='EP92 @(" ](#!H(%-I;F=L92UF=6YC=&EO;@I"25-4(" @(" @
M(" @(" ](#!H($)U:6QD+6EN+7-E;&8M=&5S="!N;W0@<W5P<&]R=&5D"DQA
M=&5N8WD@5&EM97(@(#T@,3!H"D-A8VAE($QI;F4@4VEZ93T@,&@@“D)A<V4@
M061D<F5S<R @(#T@24] -S@P,&@@;&5N9W1H(#(U-B!B>71E<PI3=6)S>7-T
M96T@5F5N9&]R($E$(#T@,3 Q-&@4W5B<WES=&5M($E$(" @(" @(" ](#$W
M8F@36%X($QA=" @(" @(" @/2 R-&YS"DUI;B!’;G0@(" @(" @(#T@,FYS
M"E!#22!);G0@4&EN(" @(#T@,0I00TD@26YT(%!I;B @(" ]($E.5"!!“DEN
M=&5R<G5P=”!L:6YE(#T@.0H
1&5V:6-E($1E<&5N9&5N="!296=I<W1E<G,Z
M"C!X,#D@,’@P,2 P># R(#!X,3@@,’@W9B P>#DP(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P>#!A(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P
M># P(#!X,# @,’@P," P># P(#!X,30@,’@Q," P>#=B(#!X,#$@,’@P," P
M># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @
M,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," ,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @“C!X,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,#$@
M,’@P," P>#(R(#!X-S8@,’@P," P># P(#!X,# @,’@P," ,’@P," P># P
M(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P
M(#!X,# @,’@P," P># P( HP># P(#!X,# @,’@P," P># P(#!X,# @,’@P
M," P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X,# @“C!X
M,# @,’@P,” P># P(#!X,# @,’@P," P># P(#!X,# @,’@P," P># P(#!X
M,# @,’@P," P># P(#!X,# @,’@P," ,’@P," P># P(#!X,# @,’@P," P
M># P(#!X,# @,’@P," P># P(#!X,# @,’@P," “DE242!2;W5T:6YG(” @
M(#T@8G5S/3 @;6]T:&5R8F]A<F0@9&5V:6-E/3 5F5N9&]R($E$(" @(" @
M/2 Q,3 V:“P@5DE!(%1E8VAN;VQO9VEE<PI$979I8V4@240@(” @(" ](#8Y
M,6@L( H@(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @
M(" @(" @(" @(" @(" @(" @(" @(" @“DE242!2;W5T:6YG(” @(#T@8G5S
M/3 @;6]T:&5R8F]A<F0@9&5V:6-E/3$5F5N9&]R($E$(" @(" @/2 Q,3 V
M:“P@5DE!(%1E8VAN;VQO9VEE<PI$979I8V4@240@(” @(" ](#@U.3AH+" *
M(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @
M(" @(" @(" @(" @(" @(" @( I)4E$@4F]U=&EN9R @(" ](&)U<STP(&UO
M=&AE<F)O87)D(&1E=FEC93TR"E9E;F1O<B!)1" @(" @(#T@,3$P-F@L(%9)
M02!496-H;F]L;V=I97,1&5V:6-E($E$(" @(" @/2 U.39H+" 5F5N9&]R
M($E$(" @(" @/2 Q,3 V:“P@5DE!(%1E8VAN;VQO9VEE<PI$979I8V4@240@
M(” @(" ](#4W,6@L( I696YD;W(@240@(" @(" ](#$Q,#9H+"!624$@5&5C
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M.DE.5$$@36]T:&5R8F]A<F0Z24Y402!3;&]T-#I)3E1"“B @(” @(" @(" @
M(" @(" @24Y40STS+#0L-2PV+#<L.2PQ,“PQ,2PQ,BPQ-“PQ-2!3;&]T,3I)
M3E1$(%-L;W0R.DE.5$$@4VQO=#,Z24Y40@H@(” @(” @(" @(" @(" @($E.
M5$0],RPT+#4L-BPW+#DL,3 L,3$L,3(L,30L,34@4VQO=#$Z24Y402!3;&]T
M,CI)3E1"(%-L;W0S.DE.5$,
“DE242!2;W5T:6YG(” @(#T@8G5S/3 @<VQO
M=#TQ(&1E=FEC93TQ-@I696YD;W(@240@(" @(" ](#$P,#)H+"!!5$D@5$5#
M2$Y/3$]‘2453($E.0PI$979I8V4@240@(" @(" ](#4Q-3EH+" (" @(" @
M(" @(" @(" @("!)3E1!/3,L-“PU+#8L-RPY+#$P+#$Q+#$R+#$T+#$U($UO
M=&AE<F)O87)D.DE.5$0@4VQO=#(Z24Y40B!3;&]T,SI)3E1#“B @(” @(” @
M(" @(" @(" @24Y40CTS+#0L-2PV+#<L.2PQ,“PQ,2PQ,BPQ-“PQ-2!-;W1H
M97)B;V%R9#I)3E1!(%-L;W0R.DE.5$,@4VQO=#,Z24Y41”!3;&]T-#I)3E1!
M"B @(” @(" @(" @(" @(" @24Y40STS+#0L-2PV+#<L.2PQ,"PQ,2PQ,BPQ
M-“PQ-2!-;W1H97)B;V%R9#I)3E1”(%-L;W0R.DE.5$0@4VQO=#,Z24Y402!-
M;W1H97)B;V%R9#I)3E1!(%-L;W0T.DE.5$(
(" @(" @(" @(" @(" @("!)
M3E1$/3,L-“PU+#8L-RPY+#$P+#$Q+#$R+#$T+#$U($UO=&AE<F)O87)D.DE.
M5$,@4VQO=#(Z24Y402!3;&]T,SI)3E1"”@I)4E$@4F]U=&EN9R @(" ](&)U
M<STP(’-L;W0],B!D979I8V4],34
5F5N9&]R($E$(" @(" @/2 Q,&(W:“P@
M,T-O;0I$979I8V4@240@(” @(" ](#DR,#!H+" (" @(" @(" @(" @(" @
M("!)3E1!/3,L-“PU+#8L-RPY+#$P+#$Q+#$R+#$T+#$U($UO=&AE<F)O87)D
M.DE.5$,@4VQO=#$Z24Y41”!3;&]T,SI)3E1"“B @(” @(" @(" @(" @(" @
M24Y40CTS+#0L-2PV+#<L.2PQ,“PQ,2PQ,BPQ-“PQ-2!-;W1H97)B;V%R9#I)
M3E1$(%-L;W0Q.DE.5$$@4VQO=#,Z24Y40PH@(” @(” @(" @(" @(" @($E.
M5$,],RPT+#4L-BPW+#DL,3 L,3$L,3(L,30L,34@36]T:&5R8F]A<F0Z24Y4
M02!3;&]T,3I)3E1"(%-L;W0S.DE.5$0@4VQO=#0Z24Y400H@(" @(" @(" @
M(" @(" @($E.5$0],RPT+#4L-BPW+#DL,3 L,3$L,3(L,30L,34@36]T:&5R
M8F]A<F0Z24Y40B!3;&]T,3I)3E1#(%-L;W0S.DE.5$$@36]T:&5R8F]A<F0Z
M24Y402!3;&]T-#I)3E1""@I)4E$@4F]U=&EN9R @(" ](&)U<STP(’-L;W0]
M,R!D979I8V4],30
5F5N9&]R($E$(" @(" @/2 Q,# R:“P@051)(%1%0TA.
M3TQ/1TE%4R!)3D,1&5V:6-E($E$(" @(" @/2 U,34Y:“P@“B @(” @(” @
M(" @(" @(" @24Y403TS+#0L-2PV+#<L.2PQ,“PQ,2PQ,BPQ-“PQ-2!-;W1H
M97)B;V%R9#I)3E1”(%-L;W0Q.DE.5$,@4VQO=#(Z24Y41”!-;W1H97)B;V%R
M9#I)3E1!(%-L;W0T.DE.5$(
(” @(" @(" @(" @(" @("!)3E1"/3,L-“PU
M+#8L-RPY+#$P+#$Q+#$R+#$T+#$U($UO=&AE<F)O87)D.DE.5$,@4VQO=#$Z
M24Y41”!3;&]T,CI)3E1!“B @(” @(" @(" @(" @(" @24Y40STS+#0L-2PV
M+#<L.2PQ,“PQ,2PQ,BPQ-“PQ-2!-;W1H97)B;V%R9#I)3E1$(%-L;W0Q.DE.
M5$$@4VQO=#(Z24Y40@H@(” @(” @(" @(" @(" @($E.5$0],RPT+#4L-BPW
M+#DL,3 L,3$L,3(L,30L,34@36]T:&5R8F]A<F0Z24Y402!3;&]T,3I)3E1"
M(%-L;W0R.DE.5$,@4VQO=#0Z24Y400H
25)1(%)O=71I;F<@(" @/2!B=7,]
M,"!M;W1H97)B;V%R9"!D979I8V4],3@5F5N9&]R($E$(" @(" @/2 Q,C5D
M:“P@“D1E=FEC92!)1” @(” @(#T@,3DX.&@L( H@(" @(" @(" @(" @(" @
M($E.5$$],RPT+#4L-BPW+#DL,3 L,3$L,3(L,30L,34@36]T:&5R8F]A<F0Z
M24Y40B!3;&]T,3I)3E1#(%-L;W0R.DE.5$0@4VQO=#,Z24Y402!3;&]T-#I)
M3E1"“B @(” @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @(" @
M(" @(" @( I)4E$@4F]U=&EN9R @(" ](&)U<STQ(’-L;W0]-"!D979I8V4]
M, H@(" @(" @(" @(" @(" @($YO(&-A<F0@8V]N9FEG=7)E9"!I;B!S;&]T
M"B @(" @(" @(" @(" @(" @24Y403TS+#0L-2PV+#<L.2PQ,“PQ,2PQ,BPQ
M-“PQ-2!-;W1H97)B;V%R9#I)3E1!(%-L;W0Q.DE.5$(@4VQO=#(Z24Y40R!3
M;&]T,SI)3E1$“B @(” @(” @(” @(" @(" @24Y40CTS+#0L-2PV+#<L.2PQ
M,“PQ,2PQ,BPQ-“PQ-2!-;W1H97)B;V%R9#I)3E1”(%-L;W0Q.DE.5$,@4VQO
M=#(Z24Y41”!3;&]T,SI)3E1!($UO=&AE<F)O87)D.DE.5$$
(" @(" @(" @
M(" @(" @(" @(" @(" @(" @(" @(" @I/=71P=70@;V8Z(”]Q;G@T+V=R
M87!H:6-S+V)I;B]S:&]W7W9E<V$5D5302!);F9O($)L;V-K"@I615-!(%-I
M9VYA='5R92 Z(%9%4T$5D5302!697)S:6]N(" @.B P,C P"D]%32!3=’)I
M;F<@4’1R(#H@,# X,#HP,3 P"D]%32!3=’)I;F<@(" @(#H@051)(%)!1$5/
M3B!610I#87!A8FEL:71I97,@(" Z(# P,# P,# Q"B @(" @(" @(" @(" @
M(" @1$%#(’=I9’1H(’-W:71C:&%B;&4@=&@."!B:71S(’!E<B!P<FEM87)Y
M(&-O;&]R"B @(" @(" @(" @(" @(" @0V]N=’)O;&QE<B!61T$@8V]M<&%T
M:6)L90H@(" @(" @(" @(" @(" @($YO<FUA;"!204U$04,@;W!E<F%T:6]N
M"E9I9&5O($UO9&4@4’1R(#H@,# X,#HP,#(R"E1O=&%L($UE;6]R>2 @(#H@
M-# P,# P," H-C<Q,#@X-C0I"E9"12!3;V9T=V%R92!2979I<VEO;B @(" Z
M(# Q,# 3T5-(%9E;F1O<B!.86UE(%!T<B @(" @(#H@,# X,#HP,3!%“D]%
M32!696YD;W(@3F%M92!3=’)I;F<@(” Z($%422!496-H;F]L;V=I97,@26YC
M+@I/14T@4’)O9’5C="!.86UE(%!T<B @(" @.B P,#@P.C Q,C0
3T5-(%!R
M;V1U8W0@3F%M92!3=’)I;F<@(#H@4C$P, I/14T@4’)O9’5C="!2978@4’1R
M(" @(" @.B P,#@P.C Q,CD
3T5-(%)E=FES:6]N(%-T<FEN9R @(" @(#H@
M,#$N,# 3T5-($1A=&$@(" @(" @(" @(" @(" @(#H@051)(%)!1$5/3B!6
M10H
1%!-4R!397)V:6-E<R!A=F%I;&%B;&4
5&]T86P@3G5M8F5R($]F(%9I
M9&5O($UO9&5S(&9O=6YD(#H@-38
"DUO9&4@.B P># P-D$@:6YF;W)M871I
M;VX
+2TM+2TM+2TM+2TM+2TM+2TM+2TM+2TM+0I-;V1E($%T=’)I8G5T97,@
M(" @(" @(#H@,# Q0@H@(" @(" @(" @(" @(" @(" @(" @(" @36]D92!3
M=7!P;W)T960@:6X@2&%R9’=A<F4
(" @(" @(" @(" @(" @(" @(" @(" @
M(%1462!/=71P=70@9G5N8W1I;VYS(&YO="!S=7!P;W)T960@8GD@0DE/4PH@
M(" @(" @(" @(" @(" @(" @(" @(" @0V]L;W(@36]D90H@(" @(" @(" @
M(" @(" @(" @(" @(" @1W)A<&AI8W,@36]D90H@(" @(" @(" @(" @(" @
M(" @(" @(" @5D=!(&-O;7!A=&EB;&4
(" @(" @(" @(" @(" @(" @(" @
M(" @(%9’02!W:6YD;W=E9"!C;VUP871I8FQE"B @(" @(" @(" @(" @(" @
M(" @(" @("!.;R!,:6YE87(@1G)A;64@0G5F9F5R"E=I;F1O=R!!($%T=’)I
M8G5T97,@(" @.B P-PH@(" @(" @(" @(" @(" @(" @(" @(" @4F5L;V-A
M=&%B;&4@5VEN9&]W
’,I"B @(" @(" @(" @(" @(" @(" @(" @("!7:6YD
M;W<@:7,@4F5A9&%B;&4
(" @(" @(" @(" @(" @(" @(" @(" @(%=I;F1O
M=R!I<R!7<FET96%B;&4
5VEN9&]W($(@071T<FEB=71E<R @(" Z(# P"B @
M(" @(" @(" @(" @(" @(" @(" @("!3:6YG;&4M3F]N(%)E;&]C871A8FQE
M(%=I;F1O=PH@(" @(" @(" @(" @(" @(" @(" @(" @5VEN9&]W(&ES($YO
M="!296%D86)L90H@(" @(" @(" @(" @(" @(" @(" @(" @5VEN9&]W(&ES
M($YO="!7<FET96%B;&4
5VEN9&]W($=R86YU;&%R:71Y(" @(" Z(# P-# *
M5VEN9&]W(%-I>F4@(" @(" @(" @(" Z(# P-# 5VEN9&]W($$@4W1A<G0@
M4V5G;65N=" Z($$P,# 5VEN9&]W($(@4W1A<G0@4V5G;65N=" Z($$P,# *
M5VEN9&]W($9U;F-T:6]N(%!O:6YT97(Z($,P,# Z-$$V,0I">71E<R!097(@
M4V-A;FQI;F4@(" @(#H@,# V-" H,3 P
0I8(%)E<V]L=71I;VX@(" @(" @
M(" @(#H@,#,R," H.# P
0I9(%)E<V]L=71I;VX@(" @(" @(" @(#H@,#(U
M." H-C P
0I8($-H87(@4VEZ92 @(” @(" @(" @(#H@,#@@
#@I"ED@0VAA
M<B!3:7IE(" @(" @(" @(" @.B P12 H,30I"DYU;6)E<B!/9B!0;&%N97,@
M(" @(" @.B P-" H-"D
0FET<R!097(@4&EX96P@(" @(" @(" Z(# T("@T
M
0I.=6UB97(@3V8@0F%N:W,@(" @(" @(#H@,#$@
#$I"DUE;6]R>2!-;V1E
M;" @(" @(" @(" @.B P,R M(%!L86YA<@I"86YK(%-I>F4@(" @(" @(" @
M(" @(#H@,# 3G5M8F5R($]F($EM86=E(%!A9V5S(" Z(# S("@S2 4F5S
M97)V960@(" @(" @(" @(" @(" Z(# Q"D9L870@1G)A;64@0G5F9F5R($%D
M9’(@.B P,# P,# P, I/9F9S8W)E96X@365M;W)Y(‘5N879A:6QA8FQE"@I-
M;V1E(#H@,’@P,3 R(&EN9F]R;6%T:6]N"BTM+2TM+2TM+2TM+2TM+2TM+2TM
M+2TM+2T
36]D92!!='1R:6)U=&5S(" @(" @(" Z(# P,4(
(" @(" @(" @
M(" @(" @(" @(" @(" @($UO9&4@4W5P<&]R=&5D(&EN($AA<F1W87)E"B @
M(" @(" @(" @(" @(" @(" @(" @("!45%D@3W5T<'5T(&9U;F-T:6]N<R!N
M;W0@<W5P<&]R=&5D(&)Y($))3U,
(" @(" @(" @(" @(" @(" @(" @(" @
M($-O;&]R($UO9&4
(" @(" @(" @(" @(" @(" @(" @(" @($=R87!H:6-S
M($UO9&4
(" @(" @(" @(" @(" @(" @(" @(" @(%9’02!C;VUP871I8FQE
M"B @(" @(" @(" @(" @(" @(" @(" @("!61T$@=VEN9&]W960@8V]M<&%T
M:6)L90H@(" @(" @(" @(" @(" @(" @(" @(" @3F@3&EN96%R($9R86UE
M($)U9F9E<@I7:6YD;W<@02!!='1R:6)U=&5S(" @(#H@,#<
(" @(" @(" @
M(" @(" @(" @(" @(" @(%)E;&]C871A8FQE(%=I;F1O=RAS
0H@(” @(" @
M(" @(" @(" @(" @(" @(" @5VEN9&]W(&ES(%)E861A8FQE"B @(" @(" @
M(" @(" @(" @(" @(" @("!7:6YD;W<@:7,@5W)I=&5A8FQE"E=I;F1O=R!"
M($%T=’)I8G5T97,@(" @.B P, H@(" @(" @(" @(" @(" @(" @(" @(" @
M4VEN9VQE+4YO;B!296QO8V%T86)L92!7:6YD;W<
(" @(" @(" @(" @(" @
M(" @(" @(" @(%=I;F1O=R!I<R!.;W0@4F5A9&%B;&4
(" @(" @(" @(" @
M(" @(" @(" @(" @(%=I;F1O=R!I<R!.;W0@5W)I=&5A8FQE"E=I;F1O=R!’
M<F%N=6QA2 @(" @.B P,#0P"E=I;F1O=R!3:7IE(" @(" @(" @(" @
M.B P,#0P"E=I;F1O=R!!(%-T87)T(%-E9VUE;G0@.B!!,# P"E=I;F1O=R!"
M(%-T87)T(%-E9VUE;G0@.B!!,# P"E=I;F1O=R!&=6YC=&EO;B!0;VEN=&5R
M.B!#,# P.C1!-C$0GET97,@4&5R(%-C86YL:6YE(" @(" Z(# P-C0@#$P
M,"D
6"!297-O;'5T:6]N(" @(" @(" @(" Z(# S,C @
#@P,"D
62!297-O
M;'5T:6]N(” @(” @(" @(" Z(# R-3@@
#8P,"D
6"!#:&%R(%-I>F4@(" @
M(" @(" @(" Z(# X("@X
0I9($-H87(@4VEZ92 @(" @(" @(" @(#H@,$4@
M
#$T
0I.=6UB97(@3V8@4&QA;F5S(" @(" @(#H@,#0@
#0I"D)I=’,@4&5R
M(%!I>&5L(" @(" @(" @.B P-" H-"D
3G5M8F5R($]F($)A;FMS(" @(" @
M(" Z(# Q("@Q
0I-96UO<GD@36]D96P@(" @(" @(" @(#H@,#,@+2!0;&%N
M87(0F%N:R!3:7IE(" @(" @(" @(" @(" Z(# P"DYU;6)E<B!/9B!);6%G
M92!086=E<R @.B P,R H,RD@“E)E<V5R=F5D(” @(" @(" @(" @(" @.B P
M,0I&;&%T($9R86UE($)U9F9E<B!!9&1R(#H@,# P,# P,# 3V9F<V-R965N
M($UE;6]R>2!U;F%V86EL86)L90H
36]D92 Z(#!X,#$P-"!I;F9O<FUA=&EO
M;@HM+2TM+2TM+2TM+2TM+2TM+2TM+2TM+2TM"DUO9&4@071T<FEB=71E<R @
M(" @(" @.B P,#%"“B @(” @(" @(" @(" @(" @(" @(" @("!-;V1E(%-U
M<’!O<G1E9"!I;B!(87)D=V%R90H@(" @(" @(" @(" @(" @(" @(" @(" @
M5%19($]U=’!U="!F=6YC=&EO;G,@;F]T(’-U<’!O<G1E9"!B>2!“24]3"B @
M(” @(" @(" @(" @(" @(" @(" @("!#;VQO<B!-;V1E"B @(" @(" @(" @
M(" @(" @(" @(" @("!’<F%P:&EC<R!-;V1E"B @(" @(" @(" @(" @(" @
M(" @(" @("!61T$@8V]M<&%T:6)L90H@(" @(" @(" @(" @(" @(" @(" @
M(" @5D=!(’=I;F1O=V5D(&-O;7!A=&EB;&4
(" @(" @(" @(" @(" @(" @
M(" @(" @($YO($QI;F5A<B!&<F%M92!"=69F97(5VEN9&]W($$@071T<FEB
M=71E<R @(" Z(# W"B @(" @(" @(" @(" @(" @(" @(" @("!296QO8V%T
M86)L92!7:6YD;W<H<RD
(" @(" @(" @(" @(" @(" @(" @(" @(%=I;F1O
M=R!I<R!296%D86)L90H@(" @(" @(" @(" @(" @(" @(" @(" @5VEN9&]W
M(&ES(%=R:71E86)L90I7:6YD;W<@0B!!='1R:6)U=&5S(" @(#H@,# (" @
M(" @(" @(" @(" @(" @(" @(" @(%-I;F=L92U.;VX@4F5L;V-A=&%B;&4@
M5VEN9&]W"B @(" @(" @(" @(" @(" @(" @(" @("!7:6YD;W<@:7,@3F]T
M(%)E861A8FQE"B @(" @(" @(" @(" @(" @(" @(" @("!7:6YD;W<@:7,@
M3F]T(%=R:71E86)L90I7:6YD;W<@1W)A;G5L87)I='D@(" @(#H@,# T, I7
M:6YD;W<@4VEZ92 @(" @(" @(" @(#H@,# T, I7:6YD;W<@02!3=&%R="!3
M96=M96YT(#H@03 P, I7:6YD;W<@0B!3=&%R="!396=M96YT(#H@03 P, I7
M:6YD;W<@1G5N8W1I;VX@4&]I;G1E<CH@0S P,#HT038Q"D)Y=&5S(%!E<B!3
M8V%N;&EN92 @(" @.B P,#@P("@Q,C@I"E@@4F5S;VQU=&EO;B @(" @(" @
M(" @.B P-# P("@Q,#(T
0I9(%)E<V]L=71I;VX@(" @(" @(" @(#H@,#,P
M," H-S8X
0I8($-H87(@4VEZ92 @(" @(" @(" @(#H@,#@@
#@I"ED@0VAA
M<B!3:7IE(" @(" @(" @(" @.B Q," H,38I"DYU;6)E<B!/9B!0;&%N97,@
M(" @(" @.B P-" H-"D
0FET<R!097(@4&EX96P@(" @(" @(" Z(# T("@T
M
0I.=6UB97(@3V8@0F%N:W,@(" @(" @(#H@,#$@
#$I"DUE;6]R>2!-;V1E
M;" @(" @(" @(" @.B P,R M(%!L86YA<@I"86YK(%-I>F4@(" @(" @(" @
M(" @(#H@,# 3G5M8F5R($]F($EM86=E(%!A9V5S(" Z(# Q("@Q2 4F5S
M97)V960@(" @(" @(" @(" @(" Z(# Q"D9L870@1G)A;64@0G5F9F5R($%D
M9’(@.B P,# P,# P, I/9F9S8W)E96X@365M;W)Y(‘5N879A:6QA8FQE"@I-
M;V1E(#H@,’@P,3@R(&EN9F]R;6%T:6]N"BTM+2TM+2TM+2TM+2TM+2TM+2TM
M+2TM+2T
36]D92!!='1R:6)U=&5S(" @(" @(" Z(# P0D(
(" @(" @(" @
M(" @(" @(" @(" @(" @($UO9&4@4W5P<&]R=&5D(&EN($AA<F1W87)E"B @
M(" @(" @(" @(" @(" @(" @(" @("!45%D@3W5T<'5T(&9U;F-T:6]N<R!N
M;W0@<W5P<&]R=&5D(&)Y($))3U,
(" @(" @(" @(" @(" @(" @(" @(" @
M($-O;&]R($UO9&4
(" @(" @(" @(" @(" @(" @(" @(" @($=R87!H:6-S
M($UO9&4
(" @(" @(" @(" @(" @(" @(" @(" @($YO="!61T$@8V]M<&%T
M:6)L90H@(" @(" @(" @(" @(" @(" @(" @(" @5D=!(’=I;F1O=V5D(&-O
M;7!A=&EB;&4
(" @(" @(" @(" @(" @(" @(" @(" @($QI;F5A<B!&<F%M
M92!"=69F97(@079A:6QA8FQE"E=I;F1O=R!!($%T=’)I8G5T97,@(" @.B P
M-PH@(" @(" @(" @(" @(" @(" @(" @(" @4F5L;V-A=&%B;&4@5VEN9&]W
M
’,I"B @(" @(" @(" @(" @(" @(" @(" @("!7:6YD;W<@:7,@4F5A9&%B
M;&4
(" @(" @(" @(" @(" @(" @(" @(" @(%=I;F1O=R!I<R!7<FET96%B
M;&4
5VEN9&]W($(@071T<FEB=71E<R @(" Z(# P"B @(" @(" @(" @(" @
M(" @(" @(" @("!3:6YG;&4M3F]N(%)E;&]C871A8FQE(%=I;F1O=PH@(" @
M(" @(" @(" @(" @(" @(" @(" @5VEN9&]W(&ES($YO="!296%D86)L90H@
M(" @(" @(" @(" @(" @(" @(" @(" @5VEN9&]W(&ES($YO="!7<FET96%B
M;&4
5VEN9&]W($=R86YU;&%R:71Y(" @(" Z(# P-# 5VEN9&]W(%-I>F4@
M(" @(" @(" @(" Z(# P-# 5VEN9&]W($$@4W1A<G0@4V5G;65N=" Z($$P
M,# 5VEN9&]W($(@4W1A<G0@4V5G;65N=" Z($$P,# 5VEN9&]W($9U;F-T
M:6]N(%!O:6YT97(Z($,P,# Z-$$V,0I">71E<R!097(@4V-A;FQI;F4@(" @
M(#H@,#$T," H,S(P
0I8(%)E<V]L=71I;VX@(" @(" @(" @(#H@,#$T," H
M,S(P
0I9(%)E<V]L=71I;VX@(" @(" @(" @(#H@,#!#." H,C P
0I8($-H
M87(@4VEZ92 @(" @(" @(" @(#H@,#@@
#@I"ED@0VAA<B!3:7IE(" @(" @
M(" @(" @.B P." H."D
3G5M8F5R($]F(%!L86YE<R @(" @(" Z(# Q("@Q
M
0I”:71S(%!E<B!0:7AE;" @(" @(" @(#H@,#@@
#@I"DYU;6)E<B!/9B!"
M86YK<R @(" @(" @.B P,2 H,2D
365M;W)Y($UO9&5L(" @(" @(" @(" Z
M(# T(“T@4&%C:V5D(%!I>&5L"D)A;FL@4VEZ92 @(” @(" @(" @(" @.B P
M, I.=6UB97(@3V8@26UA9V4@4&%G97,@(#H@1D4@
#(U-“D@“E)E<V5R=F5D
M(” @(” @(" @(" @(" @.B P,0I&;&%T($9R86UE($)U9F9E<B!!9&1R(#H@
M13@P,# P,# 3V9F(%-C<F5E;B!-96UO<GD@061D<B Z($4X,#!&03 P"D]F
M9B!38W)E96X@365M;W)Y(%-I>F4@.B!&1D,R("@V-30W-&LI"@I-;V1E(#H@
M,’@P,3!$(&EN9F]R;6%T:6]N"BTM+2TM+2TM+2TM+2TM+2TM+2TM+2TM+2T

M36]D92!!='1R:6)U=&5S(" @(" @(" Z(# P0D(
(" @(" @(" @(" @(" @
M(" @(" @(" @($UO9&4@4W5P<&]R=&5D(&EN($AA<F1W87)E"B @(" @(" @
M(" @(" @(" @(" @(" @("!45%D@3W5T<'5T(&9U;F-T:6]N<R!N;W0@<W5P
M<&]R=&5D(&)Y($))3U,
(" @(" @(" @(" @(" @(" @(" @(" @($-O;&]R
M($UO9&4
(" @(" @(" @(" @(" @(" @(" @(" @($=R87!H:6-S($UO9&4

M(" @(" @(" @(" @(" @(" @(" @(" @($YO="!61T$@8V]M<&%T:6)L90H@
M(" @(" @(" @(" @(" @(" @(" @(" @5D=!(’=I;F1O=V5D(&-O;7!A=&EB
M;&4
(" @(" @(" @(" @(" @(" @(" @(" @($QI;F5A<B!&<F%M92!"=69F
M97(@079A:6QA8FQE"E=I;F1O=R!!($%T=’)I8G5T97,@(" @.B P-PH@(" @
M(" @(" @(" @(" @(" @(" @(" @4F5L;V-A=&%B;&4@5VEN9&]W
’,I"B @
M(" @(" @(" @(" @(" @(" @(" @("!7:6YD;W<@:7,@4F5A9&%B;&4
(" @
M(" @(" @(" @(" @(" @(" @(" @(%=I;F1O=R!I<R!7<FET96%B;&4
5VEN
M9&]W($(@071T<FEB=71E<R @(" Z(# P"B @(" @(" @(" @(" @(" @(" @
M(" @("!3:6YG;&4M3F]N(%)E;&]C871A8FQE(%=I;F1O=PH@(" @(" @(" @
M(" @(" @(" @(" @(" @5VEN9&]W(&ES($YO="!296%D86)L90H@(" @(" @
M(" @(" @(" @(" @(" @(" @5VEN9&]W(&ES($YO="!7<FET96%B;&4
5VEN
M9&]W($=R86YU;&%R:71Y(" @(" Z(# P-# 5VEN9&]W(%-I>F4@(" @(" @
M(" @(" Z(# P-# 5VEN9&]W($$@4W1A<G0@4V5G;65N=" Z($$P,# 5VEN
M9&]W($(@4W1A<G0@4V5G;65N=" Z($$P,# 5VEN9&]W($9U;F-T:6]N(%!O
M:6YT97(Z($,P,# Z-$$V,0I">71E<R!097(@4V-A;FQI;F4@(" @(#H@,#(X
M," H-C0P
0I8(%)E<V]L=71I;VX@(" @(" @(" @(#H@,#$T," H,S(P
0I9
M(%)E<V]L=71I;VX@(" @(" @(" @(#H@,#!#." H,C P
0I8($-H87(@4VEZ
M92 @(" @(" @(" @(#H@,#@@
#@I"ED@0VAA<B!3:7IE(" @(" @(" @(" @
M.B P." H."D
3G5M8F5R($]F(%!L86YE<R @(" @(" Z(# Q("@Q
0I":71S
M(%!E<B!0:7AE;" @(" @(" @(#H@,$8@
#$U
0I.=6UB97(@3V8@0F%N:W,@
M(" @(" @(#H@,#$@
#$I"DUE;6]R>2!-;V1E;" @(" @(" @(" @.B P-B M
M($1I<F5C="!#;VQO<@I"86YK(%-I>F4@(" @(" @(" @(" @(#H@,# 3G5M
M8F5R($]F($EM86=E(%!A9V5S(" Z($9%("@R-30I( I297-E<G9E9" @(" @
M(" @(" @(" @(#H@,#$4F5D($UA<VL@4VEZ92 @(" @(" @(" Z(# U("@U
M
0I2960@1FEE;&0@4&]S:71I;VX@(" @(#H@,$$@
#$P
0I’<F5E;B!-87-K
M(%-I>F4@(" @(" @(#H@,#4@
#4I"D=R965N($9I96QD(%!O<VET:6]N(" @
M.B P-2 H-2D
0FQU92!-87-K(%-I>F4@(" @(" @(" Z(# U("@U
0I";'5E
M($9I96QD(%!O<VET:6]N(" @(#H@,# @
# I"E)E<V5R=F5D($UA<VL@4VEZ
M92 @(" @.B P," H,"D
4F5S97)V960@1FEE;&0@4&]S:71I;VXZ(# P("@P
M
0I$:7)E8W0@0V]L;W(@36]D92!);F9O(#H@,# (" @(" @(" @(" @(" @
M(" @(" @(" @($-O;&]R(%)A;7 @:7,@9FEX960
(" @(" @(" @(" @(" @
M(" @(" @(" @(%)E<V5R=F5D($)I="!&:65L9’,@87)E(%)E<V5R=F5D"D9L
M870@1G)A;64@0G5F9F5R($%D9’(@.B!%.# P,# P, I/9F8@4V-R965N($UE
M;6]R>2!!9&1R(#H@13@P,48T,# 3V9F(%-C<F5E;B!-96UO<GD@4VEZ92 Z
M($9&.#,@
#8U-#$Q:RD
"DUO9&4@.B P># Q,$4@:6YF;W)M871I;VX
+2TM
M+2TM+2TM+2TM+2TM+2TM+2TM+2TM+0I-;V1E($%T=’)I8G5T97,@(" @(" @
M(#H@,#!“0@H@(” @(" @(" @(" @(" @(" @(" @(" @36]D92!3=7!P;W)T
M960@:6X@2&%R9’=A<F4
(" @(" @(" @(" @(" @(" @(" @(" @(%1462!/
M=71P=70@9G5N8W1I;VYS(&YO="!S=7!P;W)T960@8GD@0DE/4PH@(" @(" @
M(" @(" @(" @(" @(" @(" @0V]L;W(@36]D90H@(" @(" @(" @(" @(" @
M(" @(" @(" @1W)A<&AI8W,@36]D90H@(" @(" @(" @(" @(" @(" @(" @
M(" @3F]T(%9’02!C;VUP871I8FQE"B @(" @(" @(" @(" @(" @(" @(" @
M("!61T$@=VEN9&]W960@8V]M<&%T:6)L90H@(" @(" @(" @(" @(" @(" @
M(" @(" @3&EN96%R($9R86UE($)U9F9E<B!!=F%I;&%B;&4
5VEN9&]W($$@
M071T<FEB=71E<R @(" Z(# W"B @(" @(" @(" @(" @(" @(" @(" @("!2
M96QO8V%T86)L92!7:6YD;W<H<RD
(" @(" @(" @(" @(" @(" @(" @(" @
M(%=I;F1O=R!I<R!296%D86)L90H@(" @(" @(" @(" @(" @(" @(" @(" @
M5VEN9&]W(&ES(%=R:71E86)L90I7:6YD;W<@0B!!='1R:6)U=&5S(" @(#H@
M,# (" @(" @(" @(" @(" @(" @(" @(" @(%-I;F=L92U.;VX@4F5L;V-A
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M.B P,$,X("@R,# I"E@@0VAA<B!3:7IE(" @(" @(" @(" @.B P." H."D

M62!#:&%R(%-I>F4@(" @(" @(" @(" Z(# X("@X
0I.=6UB97(@3V8@4&QA
M;F5S(" @(" @(#H@,#$@
#$I"D)I=’,@4&5R(%!I>&5L(" @(" @(" @.B Q
M," H,38I"DYU;6)E<B!/9B!“86YK<R @(” @(" @.B P,2 H,2D
365M;W)Y
M($UO9&5L(" @(" @(" @(" Z(# V(“T@1&ER96-T($-O;&]R"D)A;FL@4VEZ
M92 @(” @(" @(" @(" @.B P, I.=6UB97(@3V8@26UA9V4@4&%G97,@(#H@
M1D4@
#(U-“D@“E)E<V5R=F5D(” @(” @(” @(” @(" @.B P,0I2960@36%S
M:R!3:7IE(" @(" @(" @(#H@,#4@
#4I"E)E9"!&:65L9"!0;W-I=&EO;B @
M(" @.B P0B H,3$I"D=R965N($UA<VL@4VEZ92 @(" @(" @.B P-B H-BD

M1W)E96X@1FEE;&0@4&]S:71I;VX@(” Z(# U("@U
0I";'5E($UA<VL@4VEZ
M92 @(" @(" @(#H@,#4@
#4I"D)L=64@1FEE;&0@4&]S:71I;VX@(" @.B P
M," H,“D4F5S97)V960@36%S:R!3:7IE(" @(" Z(# P("@P0I297-E<G9E
M9”!&:65L9"!0;W-I=&EO;CH@,# @# I"D1I<F5C="!#;VQO<B!-;V1E($EN
M9F@.B P, H@(" @(" @(" @(" @(" @(" @(" @(" @0V]L;W(@4F%M<"!I
M<R!F:7AE9 H@(" @(" @(" @(" @(" @(" @(" @(" @4F5S97)V960@0FET
M($9I96QD<R!A<F4@4F5S97)V960
1FQA="!&<F%M92!"=69F97(@061D<B Z
M($4X,# P,# P"D]F9B!38W)E96X@365M;W)Y($%D9’(@.B!%.# Q1C0P, I/
M9F8@4V-R965N($UE;6]R>2!3:7IE(#H@1D8X,R H-C4T,3%K0H36]D92 Z
M(#!X,#$P1B!I;F9O<FUA=&EO;@HM+2TM+2TM+2TM+2TM+2TM+2TM+2TM+2TM
M"DUO9&4@071T<FEB=71E<R @(" @(" @.B P,$)"“B @(” @(" @(" @(" @
M(" @(" @(" @("!-;V1E(%-U<’!O<G1E9"!I;B!(87)D=V%R90H@(" @(" @
M(" @(" @(" @(" @(" @(" @5%19($]U=’!U="!F=6YC=&EO;G,@;F]T(’-U
M<’!O<G1E9"!B>2!“24]3"B @(” @(" @(" @(" @(" @(" @(" @("!#;VQO
M<B!-;V1E"B @(" @(" @(" @(" @(" @(" @(" @("!’<F%P:&EC<R!-;V1E
M"B @(" @(" @(" @(" @(" @(" @(" @("!.;W0@5D=!(&-O;7!A=&EB;&4*
M(" @(" @(" @(" @(" @(" @(" @(" @(%9’02!W:6YD;W=E9"!C;VUP871I
M8FQE"B @(" @(" @(" @(" @(" @(" @(" @("!,:6YE87(@1G)A;64@0G5F
M9F5R($%V86EL86)L90I7:6YD;W<@02!!=‘1R:6)U=&5S(" @(#H@,#<(" @
M(" @(" @(" @(" @(" @(" @(" @(%)E;&]C871A8FQE(%=I;F1O=RAS
0H@
M(" @(" @(" @(" @(" @(" @(" @(" @5VEN9&]W(&ES(%)E861A8FQE"B @
M(" @(" @(" @(" @(" @(" @(" @("!7:6YD;W<@:7,@5W)I=&5A8FQE"E=I
M;F1O=R!"($%T=’)I8G5T97,@(" @.B P, H@(" @(" @(" @(" @(" @(" @
M(" @(" @4VEN9VQE+4YO;B!296QO8V%T86)L92!7:6YD;W<(" @(" @(" @
M(" @(" @(" @(" @(" @(%=I;F1O=R!I<R!.;W0@4F5A9&%B;&4
(" @(" @
M(" @(" @(" @(" @(" @(" @(%=I;F1O=R!I<R!.;W0@5W)I=&5A8FQE"E=I
M;F1O=R!’<F%N=6QA2 @(" @.B P,#0P"E=I;F1O=R!3:7IE(" @(" @
M(" @(" @.B P,#0P"E=I;F1O=R!!(%-T87)T(%-E9VUE;G0@.B!!,# P"E=I
M;F1O=R!"(%-T87)T(%-E9VUE;G0@.B!!,# P"E=I;F1O=R!&=6YC=&EO;B!0
M;VEN=&5R.B!#,# P.C1!-C$0GET97,@4&5R(%-C86YL:6YE(" @(" Z(# S
M0S @
#DV,“D6"!297-O;'5T:6]N(" @(" @(" @(" Z(# Q-# @#,R,“D*
M62!297-O;'5T:6]N(” @(” @(" @(" Z(# P0S@@#(P,"D6"!#:&%R(%-I
M>F4@(" @(" @(" @(" Z(# X("@X0I9($-H87(@4VEZ92 @(" @(" @(" @
M(#H@,#@@
#@I"DYU;6)E<B!/9B!0;&%N97,@(" @(" @.B P,2 H,2D0FET
M<R!097(@4&EX96P@(" @(" @(" Z(#$X("@R-"D
3G5M8F5R($]F($)A;FMS
M(" @(" @(" Z(# Q("@Q0I-96UO<GD@36]D96P@(" @(" @(" @(#H@,#8@
M+2!$:7)E8W0@0V]L;W(0F%N:R!3:7IE(" @(" @(" @(" @(" Z(# P"DYU
M;6)E<B!/9B!);6%G92!086=E<R @.B!&12 H,C4T
2 4F5S97)V960@(" @
M(" @(" @(" @(" Z(# Q"E)E9"!-87-K(%-I>F4@(" @(" @(" @.B P." H
M."D
4F5D($9I96QD(%!O<VET:6]N(" @(" Z(#$P("@Q-BD
1W)E96X@36%S
M:R!3:7IE(" @(" @(" Z(# X("@X0I’<F5E;B!&:65L9"!0;W-I=&EO;B @
M(#H@,#@@
#@I"D)L=64@36%S:R!3:7IE(" @(" @(" @.B P." H.“D0FQU
M92!&:65L9"!0;W-I=&EO;B @(" Z(# P("@P
0I297-E<G9E9”!-87-K(%-I
M>F4@(" @(#H@,# @# I"E)E<V5R=F5D($9I96QD(%!O<VET:6]N.B P," H
M,"D
1&ER96-T($-O;&]R($UO9&4@26YF;R Z(# P"B @(" @(" @(" @(" @
M(" @(" @(" @("!#;VQO<B!286UP(&ES(&9I>&5D"B @(" @(" @(" @(" @
M(" @(" @(" @("!297-E<G9E9"!":70@1FEE;&1S(&%R92!297-E<G9E9 I&
M;&%T($9R86UE($)U9F9E<B!!9&1R(#H@13@P,# P,# *3V9F(%-C<F5E;

Thanks for the info. I took a look and it appears that both cards did
‘trap’ - there are entries for two cards in /etc/config/trap/crt.1.
I’m not sure why the second monitor did not appear to turn on from
the BIOS warm boot. Have you tried to run Photon with the two cards?
Try to put two trap lines together like the knowledge base describes.

If this does not work, you may have another option: I noticed you have
2 ATI Radeon cards. With our latest graphics drivers update, there is a
Radeon driver, that you should be able to run with a dual-display setup.
If this interests you, contact your sale rep for details on how to obtain
the latest graphics drivers.

Michael.



Paul Wolcott <paulw@apecusa.com> wrote:

Michael,

Please find the attached file ‘video_info.txt’ that was created after
running your script.

Thanks,

Paul.



Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bhvrh1$91u$> 1@nntp.qnx.com> …

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the instructions posted on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor perform a
Video
BIOS warm boot. - I don’t, in fact the trap returns fairly quickly and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would not perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott
\

Thanks for the quick response! I appreciate it.

When I run photon with the 2 cards I get black screens and have to reboot.
Putting the two trap lines together like the knowledge base describes does
the same thing when trying to run Photon.

I am going to give the Radeon Driver a try.

Thanks again!

Paul.


Michael Van Reenen <mvr@qnx.com> wrote in message
news:bi0h1d$3ip$1@nntp.qnx.com

Thanks for the info. I took a look and it appears that both cards did
‘trap’ - there are entries for two cards in /etc/config/trap/crt.1.
I’m not sure why the second monitor did not appear to turn on from
the BIOS warm boot. Have you tried to run Photon with the two cards?
Try to put two trap lines together like the knowledge base describes.

If this does not work, you may have another option: I noticed you have
2 ATI Radeon cards. With our latest graphics drivers update, there is a
Radeon driver, that you should be able to run with a dual-display setup.
If this interests you, contact your sale rep for details on how to obtain
the latest graphics drivers.

Michael.



Paul Wolcott <> paulw@apecusa.com> > wrote:
Michael,

Please find the attached file ‘video_info.txt’ that was created after
running your script.

Thanks,

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bhvrh1$91u$> 1@nntp.qnx.com> …

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the instructions posted
on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor perform a
Video
BIOS warm boot. - I don’t, in fact the trap returns fairly quickly
and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would not
perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott



\

Have installed the Radeon Driver and created a new trap file, that uses the
Radeon Driver. I can run Photon, but it only displays on the primary
monitor, nothing ever displays on the secondary monitor. I am guessing that
I am not setting my crt file up correctly - I have put the 2 trap lines
together like the Knowledge Base describes, but does not seem to have any
effect.

Any and all suggestions would be welcome…

Thanks,

Paul.


Paul Wolcott <paulw@apecusa.com> wrote in message
news:bi0h7s$dr0$1@inn.qnx.com

Thanks for the quick response! I appreciate it.

When I run photon with the 2 cards I get black screens and have to reboot.
Putting the two trap lines together like the knowledge base describes does
the same thing when trying to run Photon.

I am going to give the Radeon Driver a try.

Thanks again!

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bi0h1d$3ip$> 1@nntp.qnx.com> …
Thanks for the info. I took a look and it appears that both cards did
‘trap’ - there are entries for two cards in /etc/config/trap/crt.1.
I’m not sure why the second monitor did not appear to turn on from
the BIOS warm boot. Have you tried to run Photon with the two cards?
Try to put two trap lines together like the knowledge base describes.

If this does not work, you may have another option: I noticed you have
2 ATI Radeon cards. With our latest graphics drivers update, there is a
Radeon driver, that you should be able to run with a dual-display setup.
If this interests you, contact your sale rep for details on how to
obtain
the latest graphics drivers.

Michael.



Paul Wolcott <> paulw@apecusa.com> > wrote:
Michael,

Please find the attached file ‘video_info.txt’ that was created after
running your script.

Thanks,

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bhvrh1$91u$> 1@nntp.qnx.com> …

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the instructions
posted
on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor perform
a
Video
BIOS warm boot. - I don’t, in fact the trap returns fairly quickly
and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would not
perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott





\

Can you post the top line of your new trap file?

Thanks

Mike


Paul Wolcott <paulw@apecusa.com> wrote:

Have installed the Radeon Driver and created a new trap file, that uses the
Radeon Driver. I can run Photon, but it only displays on the primary
monitor, nothing ever displays on the secondary monitor. I am guessing that
I am not setting my crt file up correctly - I have put the 2 trap lines
together like the Knowledge Base describes, but does not seem to have any
effect.

Any and all suggestions would be welcome…

Thanks,

Paul.



Paul Wolcott <> paulw@apecusa.com> > wrote in message
news:bi0h7s$dr0$> 1@inn.qnx.com> …
Thanks for the quick response! I appreciate it.

When I run photon with the 2 cards I get black screens and have to reboot.
Putting the two trap lines together like the knowledge base describes does
the same thing when trying to run Photon.

I am going to give the Radeon Driver a try.

Thanks again!

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bi0h1d$3ip$> 1@nntp.qnx.com> …
Thanks for the info. I took a look and it appears that both cards did
‘trap’ - there are entries for two cards in /etc/config/trap/crt.1.
I’m not sure why the second monitor did not appear to turn on from
the BIOS warm boot. Have you tried to run Photon with the two cards?
Try to put two trap lines together like the knowledge base describes.

If this does not work, you may have another option: I noticed you have
2 ATI Radeon cards. With our latest graphics drivers update, there is a
Radeon driver, that you should be able to run with a dual-display setup.
If this interests you, contact your sale rep for details on how to
obtain
the latest graphics drivers.

Michael.



Paul Wolcott <> paulw@apecusa.com> > wrote:
Michael,

Please find the attached file ‘video_info.txt’ that was created after
running your script.

Thanks,

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bhvrh1$91u$> 1@nntp.qnx.com> …

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the instructions
posted
on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor perform
a
Video
BIOS warm boot. - I don’t, in fact the trap returns fairly quickly
and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would not
perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott





\

Here is the top line of my trap file

Null.ms;Pg.radeon -g1024x768x16 -d0x1002,0x5159 -I0 -HNqnx/crt;Pg.radeon -g1
024x768x16 -d0x1002,0x5159 -I1 -HNqnx/crt;#1024,768,16,200,0CBDr,radeon -
ATI Radeon

Thanks again for getting back to me, I really appreciate it!

Paul.


“Michael Van Reenen” <mvr@qnx.com> wrote in message
news:bi53vk$j54$1@nntp.qnx.com

Can you post the top line of your new trap file?

Thanks

Mike


Paul Wolcott <> paulw@apecusa.com> > wrote:
Have installed the Radeon Driver and created a new trap file, that uses
the
Radeon Driver. I can run Photon, but it only displays on the primary
monitor, nothing ever displays on the secondary monitor. I am guessing
that
I am not setting my crt file up correctly - I have put the 2 trap lines
together like the Knowledge Base describes, but does not seem to have
any
effect.

Any and all suggestions would be welcome…

Thanks,

Paul.


Paul Wolcott <> paulw@apecusa.com> > wrote in message
news:bi0h7s$dr0$> 1@inn.qnx.com> …
Thanks for the quick response! I appreciate it.

When I run photon with the 2 cards I get black screens and have to
reboot.
Putting the two trap lines together like the knowledge base describes
does
the same thing when trying to run Photon.

I am going to give the Radeon Driver a try.

Thanks again!

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bi0h1d$3ip$> 1@nntp.qnx.com> …
Thanks for the info. I took a look and it appears that both cards
did
‘trap’ - there are entries for two cards in /etc/config/trap/crt.1.
I’m not sure why the second monitor did not appear to turn on from
the BIOS warm boot. Have you tried to run Photon with the two cards?
Try to put two trap lines together like the knowledge base describes.

If this does not work, you may have another option: I noticed you
have
2 ATI Radeon cards. With our latest graphics drivers update, there
is a
Radeon driver, that you should be able to run with a dual-display
setup.
If this interests you, contact your sale rep for details on how to
obtain
the latest graphics drivers.

Michael.



Paul Wolcott <> paulw@apecusa.com> > wrote:
Michael,

Please find the attached file ‘video_info.txt’ that was created
after
running your script.

Thanks,

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bhvrh1$91u$> 1@nntp.qnx.com> …

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the instructions
posted
on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor
perform
a
Video
BIOS warm boot. - I don’t, in fact the trap returns fairly
quickly
and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would not
perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott







\

Your trap line appears to be setup correctly. Unforunately we do not
have two of the cards you are using here to reproduce the problem. If you
are willing to lend us the cards we can try to find a solution.

Mike


Paul Wolcott <paulw@apecusa.com> wrote:

Here is the top line of my trap file

Null.ms;Pg.radeon -g1024x768x16 -d0x1002,0x5159 -I0 -HNqnx/crt;Pg.radeon -g1
024x768x16 -d0x1002,0x5159 -I1 -HNqnx/crt;#1024,768,16,200,0CBDr,radeon -
ATI Radeon

Thanks again for getting back to me, I really appreciate it!

Paul.



“Michael Van Reenen” <> mvr@qnx.com> > wrote in message
news:bi53vk$j54$> 1@nntp.qnx.com> …

Can you post the top line of your new trap file?

Thanks

Mike


Paul Wolcott <> paulw@apecusa.com> > wrote:
Have installed the Radeon Driver and created a new trap file, that uses
the
Radeon Driver. I can run Photon, but it only displays on the primary
monitor, nothing ever displays on the secondary monitor. I am guessing
that
I am not setting my crt file up correctly - I have put the 2 trap lines
together like the Knowledge Base describes, but does not seem to have
any
effect.

Any and all suggestions would be welcome…

Thanks,

Paul.


Paul Wolcott <> paulw@apecusa.com> > wrote in message
news:bi0h7s$dr0$> 1@inn.qnx.com> …
Thanks for the quick response! I appreciate it.

When I run photon with the 2 cards I get black screens and have to
reboot.
Putting the two trap lines together like the knowledge base describes
does
the same thing when trying to run Photon.

I am going to give the Radeon Driver a try.

Thanks again!

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bi0h1d$3ip$> 1@nntp.qnx.com> …
Thanks for the info. I took a look and it appears that both cards
did
‘trap’ - there are entries for two cards in /etc/config/trap/crt.1.
I’m not sure why the second monitor did not appear to turn on from
the BIOS warm boot. Have you tried to run Photon with the two cards?
Try to put two trap lines together like the knowledge base describes.

If this does not work, you may have another option: I noticed you
have
2 ATI Radeon cards. With our latest graphics drivers update, there
is a
Radeon driver, that you should be able to run with a dual-display
setup.
If this interests you, contact your sale rep for details on how to
obtain
the latest graphics drivers.

Michael.



Paul Wolcott <> paulw@apecusa.com> > wrote:
Michael,

Please find the attached file ‘video_info.txt’ that was created
after
running your script.

Thanks,

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bhvrh1$91u$> 1@nntp.qnx.com> …

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the instructions
posted
on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor
perform
a
Video
BIOS warm boot. - I don’t, in fact the trap returns fairly
quickly
and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would not
perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott







\

Unfortunately I am under a bit of a time constraint, as we need to have this
working within the next couple of weeks. Can you suggest a PCI Video Card
that has been proven to do this? Or that others have used successfully. I
am using a Brand New DELL GX270 running QNX 4 & Photon 1.14.

Thanks again!

Paul.

“Michael Van Reenen” <mvr@qnx.com> wrote in message
news:bid1iq$3ii$1@nntp.qnx.com

Your trap line appears to be setup correctly. Unforunately we do not
have two of the cards you are using here to reproduce the problem. If you
are willing to lend us the cards we can try to find a solution.

Mike


Paul Wolcott <> paulw@apecusa.com> > wrote:
Here is the top line of my trap file


Null.ms;Pg.radeon -g1024x768x16 -d0x1002,0x5159 -I0 -HNqnx/crt;Pg.radeon -g1

024x768x16 -d0x1002,0x5159 -I1 -HNqnx/crt;#1024,768,16,200,0CBDr,radeon -
ATI Radeon

Thanks again for getting back to me, I really appreciate it!

Paul.


“Michael Van Reenen” <> mvr@qnx.com> > wrote in message
news:bi53vk$j54$> 1@nntp.qnx.com> …

Can you post the top line of your new trap file?

Thanks

Mike


Paul Wolcott <> paulw@apecusa.com> > wrote:
Have installed the Radeon Driver and created a new trap file, that
uses
the
Radeon Driver. I can run Photon, but it only displays on the primary
monitor, nothing ever displays on the secondary monitor. I am
guessing
that
I am not setting my crt file up correctly - I have put the 2 trap
lines
together like the Knowledge Base describes, but does not seem to have
any
effect.

Any and all suggestions would be welcome…

Thanks,

Paul.


Paul Wolcott <> paulw@apecusa.com> > wrote in message
news:bi0h7s$dr0$> 1@inn.qnx.com> …
Thanks for the quick response! I appreciate it.

When I run photon with the 2 cards I get black screens and have to
reboot.
Putting the two trap lines together like the knowledge base
describes
does
the same thing when trying to run Photon.

I am going to give the Radeon Driver a try.

Thanks again!

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bi0h1d$3ip$> 1@nntp.qnx.com> …
Thanks for the info. I took a look and it appears that both cards
did
‘trap’ - there are entries for two cards in
/etc/config/trap/crt.1.
I’m not sure why the second monitor did not appear to turn on from
the BIOS warm boot. Have you tried to run Photon with the two
cards?
Try to put two trap lines together like the knowledge base
describes.

If this does not work, you may have another option: I noticed you
have
2 ATI Radeon cards. With our latest graphics drivers update,
there
is a
Radeon driver, that you should be able to run with a dual-display
setup.
If this interests you, contact your sale rep for details on how to
obtain
the latest graphics drivers.

Michael.



Paul Wolcott <> paulw@apecusa.com> > wrote:
Michael,

Please find the attached file ‘video_info.txt’ that was created
after
running your script.

Thanks,

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bhvrh1$91u$> 1@nntp.qnx.com> …

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the
instructions
posted
on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor
perform
a
Video
BIOS warm boot. - I don’t, in fact the trap returns fairly
quickly
and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would
not
perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott









\

We’ve successfully run dual-monitor with 2 ATI Radeon 7500 64MB PCI cards.
I believe they are available right off the ATI website.


Mike


Paul Wolcott <paulw@apecusa.com> wrote:

Unfortunately I am under a bit of a time constraint, as we need to have this
working within the next couple of weeks. Can you suggest a PCI Video Card
that has been proven to do this? Or that others have used successfully. I
am using a Brand New DELL GX270 running QNX 4 & Photon 1.14.

Thanks again!

Paul.

“Michael Van Reenen” <> mvr@qnx.com> > wrote in message
news:bid1iq$3ii$> 1@nntp.qnx.com> …

Your trap line appears to be setup correctly. Unforunately we do not
have two of the cards you are using here to reproduce the problem. If you
are willing to lend us the cards we can try to find a solution.

Mike


Paul Wolcott <> paulw@apecusa.com> > wrote:
Here is the top line of my trap file


Null.ms;Pg.radeon -g1024x768x16 -d0x1002,0x5159 -I0 -HNqnx/crt;Pg.radeon -g1

024x768x16 -d0x1002,0x5159 -I1 -HNqnx/crt;#1024,768,16,200,0CBDr,radeon -
ATI Radeon

Thanks again for getting back to me, I really appreciate it!

Paul.


“Michael Van Reenen” <> mvr@qnx.com> > wrote in message
news:bi53vk$j54$> 1@nntp.qnx.com> …

Can you post the top line of your new trap file?

Thanks

Mike


Paul Wolcott <> paulw@apecusa.com> > wrote:
Have installed the Radeon Driver and created a new trap file, that
uses
the
Radeon Driver. I can run Photon, but it only displays on the primary
monitor, nothing ever displays on the secondary monitor. I am
guessing
that
I am not setting my crt file up correctly - I have put the 2 trap
lines
together like the Knowledge Base describes, but does not seem to have
any
effect.

Any and all suggestions would be welcome…

Thanks,

Paul.


Paul Wolcott <> paulw@apecusa.com> > wrote in message
news:bi0h7s$dr0$> 1@inn.qnx.com> …
Thanks for the quick response! I appreciate it.

When I run photon with the 2 cards I get black screens and have to
reboot.
Putting the two trap lines together like the knowledge base
describes
does
the same thing when trying to run Photon.

I am going to give the Radeon Driver a try.

Thanks again!

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bi0h1d$3ip$> 1@nntp.qnx.com> …
Thanks for the info. I took a look and it appears that both cards
did
‘trap’ - there are entries for two cards in
/etc/config/trap/crt.1.
I’m not sure why the second monitor did not appear to turn on from
the BIOS warm boot. Have you tried to run Photon with the two
cards?
Try to put two trap lines together like the knowledge base
describes.

If this does not work, you may have another option: I noticed you
have
2 ATI Radeon cards. With our latest graphics drivers update,
there
is a
Radeon driver, that you should be able to run with a dual-display
setup.
If this interests you, contact your sale rep for details on how to
obtain
the latest graphics drivers.

Michael.



Paul Wolcott <> paulw@apecusa.com> > wrote:
Michael,

Please find the attached file ‘video_info.txt’ that was created
after
running your script.

Thanks,

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bhvrh1$91u$> 1@nntp.qnx.com> …

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the
instructions
posted
on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor
perform
a
Video
BIOS warm boot. - I don’t, in fact the trap returns fairly
quickly
and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor would
not
perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott









\

Thanks!

Paul

“Michael Van Reenen” <mvr@qnx.com> wrote in message
news:big894$1sl$1@nntp.qnx.com

We’ve successfully run dual-monitor with 2 ATI Radeon 7500 64MB PCI cards.
I believe they are available right off the ATI website.


Mike


Paul Wolcott <> paulw@apecusa.com> > wrote:
Unfortunately I am under a bit of a time constraint, as we need to have
this
working within the next couple of weeks. Can you suggest a PCI Video
Card
that has been proven to do this? Or that others have used successfully.
I
am using a Brand New DELL GX270 running QNX 4 & Photon 1.14.

Thanks again!

Paul.

“Michael Van Reenen” <> mvr@qnx.com> > wrote in message
news:bid1iq$3ii$> 1@nntp.qnx.com> …

Your trap line appears to be setup correctly. Unforunately we do not
have two of the cards you are using here to reproduce the problem. If
you
are willing to lend us the cards we can try to find a solution.

Mike


Paul Wolcott <> paulw@apecusa.com> > wrote:
Here is the top line of my trap file



Null.ms;Pg.radeon -g1024x768x16 -d0x1002,0x5159 -I0 -HNqnx/crt;Pg.radeon -g1


024x768x16 -d0x1002,0x5159 -I1 -HNqnx/crt;#1024,768,16,200,0CBDr,radeon -
ATI Radeon

Thanks again for getting back to me, I really appreciate it!

Paul.


“Michael Van Reenen” <> mvr@qnx.com> > wrote in message
news:bi53vk$j54$> 1@nntp.qnx.com> …

Can you post the top line of your new trap file?

Thanks

Mike


Paul Wolcott <> paulw@apecusa.com> > wrote:
Have installed the Radeon Driver and created a new trap file, that
uses
the
Radeon Driver. I can run Photon, but it only displays on the
primary
monitor, nothing ever displays on the secondary monitor. I am
guessing
that
I am not setting my crt file up correctly - I have put the 2 trap
lines
together like the Knowledge Base describes, but does not seem to
have
any
effect.

Any and all suggestions would be welcome…

Thanks,

Paul.


Paul Wolcott <> paulw@apecusa.com> > wrote in message
news:bi0h7s$dr0$> 1@inn.qnx.com> …
Thanks for the quick response! I appreciate it.

When I run photon with the 2 cards I get black screens and have
to
reboot.
Putting the two trap lines together like the knowledge base
describes
does
the same thing when trying to run Photon.

I am going to give the Radeon Driver a try.

Thanks again!

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bi0h1d$3ip$> 1@nntp.qnx.com> …
Thanks for the info. I took a look and it appears that both
cards
did
‘trap’ - there are entries for two cards in
/etc/config/trap/crt.1.
I’m not sure why the second monitor did not appear to turn on
from
the BIOS warm boot. Have you tried to run Photon with the two
cards?
Try to put two trap lines together like the knowledge base
describes.

If this does not work, you may have another option: I noticed
you
have
2 ATI Radeon cards. With our latest graphics drivers update,
there
is a
Radeon driver, that you should be able to run with a
dual-display
setup.
If this interests you, contact your sale rep for details on how
to
obtain
the latest graphics drivers.

Michael.



Paul Wolcott <> paulw@apecusa.com> > wrote:
Michael,

Please find the attached file ‘video_info.txt’ that was
created
after
running your script.

Thanks,

Paul.


Michael Van Reenen <> mvr@qnx.com> > wrote in message
news:bhvrh1$91u$> 1@nntp.qnx.com> …

The script below gathers system information that may help
us to determine what is wrong. Can you run the script and
either post the output here or send it to me.


Paul Wolcott <> paulw@apecusa.com> > wrote:
Greetings,

Trying to setup a multi-monitor display using the
instructions
posted
on
the
QNX Knowledge Base -

When creating my trap file using the following command:
./Hydra.ms -T > /etc/config/trap/crt.4

I understand that I should be seeing the secondary monitor
perform
a
Video
BIOS warm boot. - I don’t, in fact the trap returns
fairly
quickly
and
does
show both video cards within the trap file.

Anyone have any ideas as to why the secondary monitor
would
not
perform
the
video BIOS warm boot?


Thanks,
Paul Wolcott











\