I really need you help. Im working on a proyect and we want to automatize an
turn machine, we actually automatize one, but we have an PC with a speed
processor of 300 MHz, now we change the program (in QNX) to a computer that
has a processor speed of 1.3 GHz, so the output frecuency for the motors is
too high. We are using timers, and we send a “Message” to generate a pulse
that feed the motors and we just cant find the solutions or were is the
problem,
I hope you can help me,
sincerily
armando
“Armando Garza” <el_titirrin@yahoo.com> wrote in message
news:bmvueh$1gi$1@inn.qnx.com…
I really need you help. Im working on a proyect and we want to automatize
an
turn machine, we actually automatize one, but we have an PC with a speed
processor of 300 MHz, now we change the program (in QNX) to a computer
that
has a processor speed of 1.3 GHz, so the output frecuency for the motors
is
too high. We are using timers, and we send a “Message” to generate a pulse
that feed the motors and we just cant find the solutions or were is the
problem,
I hope you can help me,
If you are using timers you should be ok, something must be wrong with the
way you use them. You will have to post some code 
sincerily
armando