hi,
the build-in network card in the sony-vaio does sometimes not work
when i reboot my computer from win98/2 and then go into qnx.
there is an error msg during qnx boot with something like
MII not found. what ever that is.
wottodo?
cheers
ramin
Ramin Assadollahi <assadollahi@exb.de> wrote:
hi,
the build-in network card in the sony-vaio does sometimes not work
when i reboot my computer from win98/2 and then go into qnx.there is an error msg during qnx boot with something like
MII not found. what ever that is.wottodo?
Could you post the output from runing “nicinfo” here? I would
be intereted in knowing exactly what network card you have in
your laptop.
chris
\
cdm@qnx.com > “The faster I go, the behinder I get.”
Chris McKillop – Lewis Carroll –
Software Engineer, QSSL
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
here you are.
it seems, that it does not work when you do a warm start.
with a cold start everything is fine. note: doing a warm
start from qnx to win98/2 windows hangs at startup.
i had pnpos disabled.
the networkadapter in the sony vaio is built in, so its
not a card like a pcmcia device.
cheers
ramin
nicinfo:
NOT GONNA WORK Ethernet Controller
Physical Node ID … 080046 079F61
Current Physical Node ID … 080046 079F61
Media Rate … 100.00 Mb/s full-duplex UTP
MTU … 1514
Lan … 0
I/O Port Range … 0xFC40 → 0xFC7F
Hardware Interrupt … 0x9
Total Packets Txd OK … 269
Total Packets Txd Bad … 0
Total Packets Rxd OK … 484
Total Rx Errors … 0
Tx Collision Errors … 0
Tx Collisions Errors (aborted) … 0
Carrier Sense Lost on Tx … 0
FIFO Underruns During Tx … 0
Tx defered … 0
Out of Window Collisions … 0
FIFO Overruns During Rx … 0
Alignment errors … 0
CRC errors … 0