Hi Sergey:
I’m also a newbie here and I even can’t still connect to Internet, but I did
make my modem work. It’s also an Sportster Voice but it’s 56. I only can
help saying that you may have to use the correct init string. I use the
following:
AT&F1S0=0S7=90E1V1
a simple AT&F1 (hardware flow control) should be enough if your
USR/3Com NVram is set right, &F1 is the hardware setting,
&F0 or a simple ATZ are software flow control, i think that if
you use ATZ1 that too uses the hardware flow control.
i`v just dumped my NVram to a file by typeing ATI5, ATI6 and ATI7
from a terminal program.
while mine is also a 56k/V90 the results might be simular, its been a
very long time since i messed about of NVram setting way back
in my BBS days infact, so my setting might be slightly off
(if so tell me what i can optimise LOL), at it stands i can conect
on average 46333 in both winblows and RTP with this external
USR Sportster Flash.
heres its output.
ati5
U.S. Robotics 56K Voice EXT NVRAM Settings…
Template Y0
DIAL=TONE B0 E1 F1 L2 M1 Q0 V1 X4
SPEED=115200 PARITY=N WORDLEN=8
&A3 &B1 &C1 &D2 &H1 &I0 &K1 &M4 &N0
&P1 &R2 &S0 &T5 &U0 &Y1
S00=000 S02=043 S03=013 S04=010 S05=008 S06=004 S07=060
S08=002 S09=006 S10=014 S11=070 S12=050 S13=000 S15=000
S19=000 S21=010 S22=017 S23=019 S25=005 S27=001 S28=008
S29=020 S30=000 S31=128 S32=002 S33=000 S34=000 S35=000
S36=014 S38=000 S39=011 S40=000 S41=004 S42=000
Strike a key when ready . . .
Template Y1 (>>>> this is the one that &F1 uses for HFC <<<<)
DIAL=TONE B0 E1 F1 L2 M1 Q0 V1 X4
SPEED=115200 PARITY=N WORDLEN=8
&A3 &B1 &C1 &D2 &H2 &I2 &K1 &M4 &N0
&P1 &R1 &S0 &T5 &U0 &Y1
S00=000 S02=043 S03=013 S04=010 S05=008 S06=004 S07=060
S08=002 S09=006 S10=014 S11=070 S12=050 S13=000 S15=000
S19=000 S21=010 S22=017 S23=019 S25=005 S27=001 S28=008
S29=020 S30=000 S31=128 S32=002 S33=000 S34=000 S35=000
S36=014 S38=000 S39=011 S40=000 S41=004 S42=000
STORED PHONE #0:
#1:
#2:
#3:
ati7
Configuration Profile…
Product type UK External
Product ID: 01166301
Options V32bis,V.34+,x2,V.90
Fax Options Class 1/Class 2.0
Voice Options Speakerphone, TAD
Clock Freq 92.0Mhz
EPROM 256k
RAM 64k
FLASH date 4/17/98
FLASH rev 12.1.0
DSP date 4/17/98
DSP rev 12.1.0
OK
You can find the appropiate in the apps included in the modem CD, but before
you can try with the one I use. If the problem is when the modem tries to
detect the line, you may include ‘X0’ before ‘E1V1’.
Hope to help,
Leo
mcabral@fafodoc.unl.edu.ar
Sergey Sokolov <> renar@an.ru> > escribió en el mensaje de noticias
8sfdue$ash$> 1@inn.qnx.com> …
Hi!
I have a big problem with connection to Internet from QNX RTP. All fields
in
DialUP Config are filled properly, but when I click “Connect” button this
message appear:
Opening device ‘/dev/ser2’
Initializing modem
ATZ
ok
ATM1
Connection failed
Modem USR Sportster Voice 33,6 external on COM2.
How can I solve this problem? Modem works OK in other OS’es like Windows
2000 and BeOS. If You need I can send all system info about my hardware.
Anyhow, QNX is the best OS I used. Without any problem I connect Cyrillic
fonts and now can read and write Russian texts.
Best regards
Sergey
\
–
Paul May, Manchester, UK
Team AMIGA Central, Phoenix Core