Hello group,
I want to work with RTP, Windows 98 and Linux at one system.
I have a 2-disk-System (15 GB and 4 GB)
Linux should be started via LILO. Are there any conflicts with RTP
bootloader and LILO. If so, is there any bootloader available which
can start …
RTP is NOT installed inside of a Windows partion
CU
Georg Pohl
I have had no problems using LILO to boot a QNX RtP
partition. If you do have any difficulty, let us know.
Georg Pohl <pohl.wvz@klosterfrau.de> wrote:
Hello group,
I want to work with RTP, Windows 98 and Linux at one system.
I have a 2-disk-System (15 GB and 4 GB)
Linux should be started via LILO. Are there any conflicts with RTP
bootloader and LILO. If so, is there any bootloader available which
can start …
- Linux from 2nd IDE
- Windows 98 from 1st IDE
- RTP from 1st IDE
RTP is NOT installed inside of a Windows partion
CU
Georg Pohl
<jamesm@qnx.com> wrote in message news:90m0dc$qcq$2@nntp.qnx.com…
I have had no problems using LILO to boot a QNX RtP
partition. If you do have any difficulty, let us know.
I haven’t figured out how to use LILO to boot a RtP partition if LILO is on
the primary IDE device and the RtP partition is on the slave IDE device.
RtP
begins to boot, and then hangs.
Andrew
Problem here is similar … C: Drive has Win98SE and BeOS D: Drive has only
WIN386.SWP file at this time. D/L QNX to Zip Drive and did installation.
When Config Sys shows choices for various OS, both selections for QNX will
not run …
Error message is:
“Andrew Thomas” <andrew-s-thomas@home.nospam.com> wrote in message
news:915jp0$dr$1@inn.qnx.com…
jamesm@qnx.com> > wrote in message news:90m0dc$qcq$> 2@nntp.qnx.com> …
I have had no problems using LILO to boot a QNX RtP
partition. If you do have any difficulty, let us know.I haven’t figured out how to use LILO to boot a RtP partition if LILO is
on
the primary IDE device and the RtP partition is on the slave IDE device.
RtP
begins to boot, and then hangs.Andrew
Here is the error message:
…diskroot file for root not found on any file system
starting in safe mode
unable to start divc-con
Then, using the floppy disk:
Boot gets to the F Key list, then:
(F1 Selected)
unable to start devc-con
Any help?
TIA
Dave
“Dave Mann” <misterfixit@loveable.com> wrote in message
news:9f8di1$c6p$1@inn.qnx.com…
Problem here is similar … C: Drive has Win98SE and BeOS D: Drive has
only
WIN386.SWP file at this time. D/L QNX to Zip Drive and did installation.
When Config Sys shows choices for various OS, both selections for QNX will
not run …Error message is:
“Andrew Thomas” <> andrew-s-thomas@home.nospam.com> > wrote in message
news:915jp0$dr$> 1@inn.qnx.com> …
jamesm@qnx.com> > wrote in message news:90m0dc$qcq$> 2@nntp.qnx.com> …
I have had no problems using LILO to boot a QNX RtP
partition. If you do have any difficulty, let us know.I haven’t figured out how to use LILO to boot a RtP partition if LILO is
on
the primary IDE device and the RtP partition is on the slave IDE device.
RtP
begins to boot, and then hangs.Andrew
\