USB MASS STORAGE DEVICE DEVICE DETECTED BUT NOT LISTED UNDER

n.karthi_keyan · February 8, 2005, 2:16pm

Hi All,
I am having a USB Mass Storage device and on typing

#io-usb -dehci has created /dev/io-usb/io-usb

#usb -v lists the following
Vendor : 0x0781 (SanDisk Corp.)
Product : 0x7112 (Cruzer Micro)

#devb-umass cam pnp

#ls /dev does’nt list down the pathname for the device and so
could’nt mount the same

#sloginfo lists

Time Feb 07 15:21:45 3 17 Feb 07 15:21:45 3 17 Feb 07 15:21:45 3 17 Feb 07 15:21:45 3 17 Feb 07 15:21:45 3 17 Feb 07 15:21:45 2 19 Feb 07 15:21:45 2 19 Feb 07 15:21:45 2 19 Feb 07 15:21:45 2 19 Feb 07 15:21:45 2 19 Feb 07 15:21:45 2 19 Feb 07 15:21:45 2 19 Feb 07 15:21:45 2 19 Feb 07 15:21:49 5 Feb 07 15:21:49 5 14 Feb 07 15:21:49 3 14 Feb 07 15:22:23 Feb 07 15:22:23 Feb 07 15:22:23 2 Feb 07 15:22:24 Feb 07 15:22:24 Feb 07 15:22:24 2 Feb 07 15:22:25 Feb 07 15:22:25 Feb 07 15:22:26 2 Feb 07 15:22:27 Feb 07 15:22:27 Feb 07 15:22:27 2 Feb 07 15:22:28 Feb 07 15:22:28 Feb 07 15:22:29 2 Feb 07 15:22:30 Feb 07 15:22:30 Feb 07 15:22:30 2 Feb 07 15:22:31 Feb 07 15:22:31 Feb 07 15:22:31 2 Feb 07 15:22:32 Feb 07 15:22:32 Feb 07 15:22:33 2 Feb 07 15:22:34 Feb 07 15:22:34 Feb 07 15:22:34 2 Feb 07 15:22:35 Feb 07 15:22:35 Feb 07 15:22:35 2 Feb 07 15:22:36 2 Feb 07 15:22:36 2 Feb 07 15:22:36 2 Feb 07 15:22:36 2 Feb 07 15:22:36 2 Feb 07 15:22:36 2 Feb 07 15:22:36 2 Sev Major Minor Args
0 Range check failed (IO) - Dev 24cb - Vend 8086
0 Range check failed (IO) - Dev 24cb - Vend 8086
0 Range check failed (IO) - Dev 24cb - Vend 8086
0 Range check failed (IO) - Dev 24cb - Vend 8086
0 Range check failed (MEM) - Dev 24cb - Vend 8086
0 eide_identify_devices: Intel 82801DB vid 8086,
0 eide_identify_devices: cmd_addr 1f0, cntl_addr
0 eide_display_devices: ST340014A tid 0, c
0 eide_init_devices: ST340014A path 0, tid
0 eide_identify_devices: Intel 82801DB vid 8086,
0 eide_identify_devices: cmd_addr 170, cntl_addr
0 eide_display_devices: SAMSUNG CD-ROM tid 0, c
0 eide_init_devices: SAMSUNG CD-ROM path 0, tid
6 200 Installing /dev/par port 378
0 tcpip starting
0 Using pseudo random generator. See “random” op
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
2 19 900 umass_bulk_csw_cbf: invalid residual 33000000
2 19 900 umass_bulk_reset: path 0, devno 1
5 0 scsi_interpret_sense: path=0, target=0, lun=0,
5 0 scsi_interpret_sense: path=0, target=0, lun=1,
5 0 scsi_interpret_sense: path=0, target=0, lun=2,
5 0 scsi_interpret_sense: path=0, target=0, lun=3,
5 0 scsi_interpret_sense: path=0, target=0, lun=4,
5 0 scsi_interpret_sense: path=0, target=0, lun=5,
5 0 scsi_interpret_sense: path=0, target=0, lun=6,
5 0 scsi_interpret_sense: path=0, target=0, lun=7,

If any of have the solution for the same. Please do reply to this mail.

Regards,
Karthik

Tim · February 8, 2005, 5:51pm

Karthik,

See this thread for more info on your problem:

openqnx.com/PNphpBB2-viewtopic-t5099-.html

Looks like your Sandisk is one of the ones that doesn’t play well with the default devb-umass driver and so you will need to get the experimental one or get the same Sandisk cruiser drive I have that works with the driver.

Good luck,

Tim

n.karthi_keyan · February 9, 2005, 5:54am

Tim ,

Thank you Very much for Your Reply.

I have used sony Thumb drive and could mount the same.

bye bye to Sandisk cruze micro .

Regards,
Karthik