My modem is on port 3 (US Sportster 56000). I am not able to get any
response back from it. The dialer says it can’t connect on port 3. If I
set it to port 1, it tries but eventually fails. Qtalk doesn’t let me
type in any AT commands (I can’t type into it).
Thanks,
Raul
P.S. What I really want to do is use my Sympatico HSE (ADSL) connection,
but I guess that’s out of the question from what I’ve read on these
newsgroups (tell me I’m wrong!)
Hi Raul,
Try starting the driver as follows:
devc-ser8250 -u3 3e8,7
address,irq
Make sure that the IRQ is not plug and play (turn this off in the bios).
Also make sure your modem is not a Win Modem.
Erick.
rsm <raul@ottawa.com> wrote:
My modem is on port 3 (US Sportster 56000). I am not able to get any
response back from it. The dialer says it can’t connect on port 3. If I
set it to port 1, it tries but eventually fails. Qtalk doesn’t let me
type in any AT commands (I can’t type into it).Thanks,
Raul
P.S. What I really want to do is use my Sympatico HSE (ADSL) connection,
but I guess that’s out of the question from what I’ve read on these
newsgroups (tell me I’m wrong!)
Thank you. It works like a charm!
Raul
Hardware Support Account wrote:
Hi Raul,
Try starting the driver as follows:
devc-ser8250 -u3 3e8,7
address,irq
Make sure that the IRQ is not plug and play (turn this off in the bios).
Also make sure your modem is not a Win Modem.
Erick.
rsm <> raul@ottawa.com> > wrote:
My modem is on port 3 (US Sportster 56000). I am not able to get any
response back from it. The dialer says it can’t connect on port 3. If I
set it to port 1, it tries but eventually fails. Qtalk doesn’t let me
type in any AT commands (I can’t type into it).Thanks,
Raul
P.S. What I really want to do is use my Sympatico HSE (ADSL) connection,
but I guess that’s out of the question from what I’ve read on these
newsgroups (tell me I’m wrong!)