Hi everybody.
Is it possible to watch TV under the RTP with
the ATI All-In-Wonder Pro ? I checked the
Release Notes of the version 6.1 and it says
that TV and capturing is added to the driver
of Rage 128 chip. What’s about my video/TV
card ? Are there any third-party solutions ?
Thanks for reading this.
Best regards,
Arturas Baranauskas
Hi,
Can you post the output from pci -v ?
Regards,
Joe
Arturas Baranauskas <arturas.baranauskas@centras.lt> wrote:
Hi everybody.
Is it possible to watch TV under the RTP with
the ATI All-In-Wonder Pro ? I checked the
Release Notes of the version 6.1 and it says
that TV and capturing is added to the driver
of Rage 128 chip. What’s about my video/TV
card ? Are there any third-party solutions ?Thanks for reading this.
Best regards,
Arturas Baranauskas
Hi.
Can you post the output from pci -v ?
Here it is (see below)
Best regards,
Arturas B.
P.S.: currently I’m running the 6.0 version with no patches.
PCI version = 2.10
Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7190h, 82443BX/ZX 440BX/ZX AGPset Host Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2210h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 10h - 1f000203h
Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7191h, 82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 220h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = d0h
I/O Limit = d0h
Secondary Status = 22a0h
Memory Base = e400h
Memory Limit = e7f0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 136ns
PCI Int Pin = NC
Interrupt line = 0
Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 7110h, 82371AB PIIX4 ISA Bridge
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 7111h, 82371AB PIIX4 IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = f000h length 16 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 7112h, 82371AB PIIX4 USB Interface
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = e000h length 32 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 10
Class = Bridge (Unknown)
Vendor ID = 8086h, Intel Corporation
Device ID = 7113h, 82371AB PIIX4 Power Management Controller
PCI index = 0h
Class Codes = 068000h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 3
Status Reg = 280h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Multimedia (Audio)
Vendor ID = 1102h, Creative Labs
Device ID = 2h, EMU10000 Sound Blaster Live!
PCI index = 0h
Class Codes = 040100h
Revision ID = 8h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 290h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = e400h length 32 enabled
Subsystem Vendor ID = 1102h
Subsystem ID = 8027h
Max Lat = 20ns
Min Gnt = 2ns
PCI Int Pin = INT A
Interrupt line = 5
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 601h - 0h
Class = Input (Unknown)
Vendor ID = 1102h, Creative Labs
Device ID = 7002h, EMU10000 Game Port
PCI index = 0h
Class Codes = 098000h
Revision ID = 8h
Bus number = 0
Device number = 11
Function num = 1
Status Reg = 290h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = e800h length 8 enabled
Subsystem Vendor ID = 1102h
Subsystem ID = 20h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 601h - 0h
Class = Display (VGA)
Vendor ID = 1002h, ATI Technologies
Device ID = 4742h, Rage 3D Pro AGP 2x
PCI index = 0h
Class Codes = 030000h
Revision ID = 5ch
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 290h
Command Reg = 86h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
Mem Address = e4000000h 32bit length 16777216 enabled
IO Address = d000h length 256 disabled
Mem Address = e6000000h 32bit length 4096 enabled
Subsystem Vendor ID = 1002h
Subsystem ID = 64h
Expansion ROM = e5000000h length 131072 disabled
Max Lat = 0ns
Min Gnt = 8ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 50h
Capability ID = 2h
Capabilities = 10h - ff000203h
Hi Arturas,
The card is an ATI Rage Pro - it currently does not support
the TV tuner/capture features. We plan to add them in a
future release.
Regards,
Joe
Arturas Baranauskas <arturas.baranauskas@centras.lt> wrote:
Hi.
Can you post the output from pci -v ?
Here it is (see below)
Best regards,
Arturas B.P.S.: currently I’m running the 6.0 version with no patches.
PCI version = 2.10
Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7190h, 82443BX/ZX 440BX/ZX AGPset Host Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2210h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 10h - 1f000203hClass = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7191h, 82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 220h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = d0h
I/O Limit = d0h
Secondary Status = 22a0h
Memory Base = e400h
Memory Limit = e7f0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 136ns
PCI Int Pin = NC
Interrupt line = 0Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 7110h, 82371AB PIIX4 ISA Bridge
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 7111h, 82371AB PIIX4 IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = f000h length 16 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 7112h, 82371AB PIIX4 USB Interface
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = e000h length 32 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 10Class = Bridge (Unknown)
Vendor ID = 8086h, Intel Corporation
Device ID = 7113h, 82371AB PIIX4 Power Management Controller
PCI index = 0h
Class Codes = 068000h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 3
Status Reg = 280h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0Class = Multimedia (Audio)
Vendor ID = 1102h, Creative Labs
Device ID = 2h, EMU10000 Sound Blaster Live!
PCI index = 0h
Class Codes = 040100h
Revision ID = 8h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 290h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = e400h length 32 enabled
Subsystem Vendor ID = 1102h
Subsystem ID = 8027h
Max Lat = 20ns
Min Gnt = 2ns
PCI Int Pin = INT A
Interrupt line = 5
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 601h - 0h
Class = Input (Unknown)
Vendor ID = 1102h, Creative Labs
Device ID = 7002h, EMU10000 Game Port
PCI index = 0h
Class Codes = 098000h
Revision ID = 8h
Bus number = 0
Device number = 11
Function num = 1
Status Reg = 290h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = e800h length 8 enabled
Subsystem Vendor ID = 1102h
Subsystem ID = 20h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 601h - 0h
Class = Display (VGA)
Vendor ID = 1002h, ATI Technologies
Device ID = 4742h, Rage 3D Pro AGP 2x
PCI index = 0h
Class Codes = 030000h
Revision ID = 5ch
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 290h
Command Reg = 86h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
Mem Address = e4000000h 32bit length 16777216 enabled
IO Address = d000h length 256 disabled
Mem Address = e6000000h 32bit length 4096 enabled
Subsystem Vendor ID = 1002h
Subsystem ID = 64h
Expansion ROM = e5000000h length 131072 disabled
Max Lat = 0ns
Min Gnt = 8ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 50h
Capability ID = 2h
Capabilities = 10h - ff000203h
Hello.
We plan to add them in a future release.
Is this on your TO-DO list or thoughts, ideas ?
Best regards,
Arturas B.
Hardware Support Account <hw@qnx.com> wrote:
Hi Arturas,
The card is an ATI Rage Pro - it currently does not support
the TV tuner/capture features. We plan to add them in a
future release.
Will this be constructed in the same layered architecture as the different
DDK’s so that anyone can build their own driver for their particular card?
I have a Pinnacle PCTV pro card. It’d be cool to get it working under QNX
some time 
regards,
rick
Regards,
Joe
Arturas Baranauskas <> arturas.baranauskas@centras.lt> > wrote:
Hi.
Can you post the output from pci -v ?
Here it is (see below)
Best regards,
Arturas B.P.S.: currently I’m running the 6.0 version with no patches.
PCI version = 2.10
Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7190h, 82443BX/ZX 440BX/ZX AGPset Host Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2210h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 10h - 1f000203hClass = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7191h, 82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 220h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = d0h
I/O Limit = d0h
Secondary Status = 22a0h
Memory Base = e400h
Memory Limit = e7f0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 136ns
PCI Int Pin = NC
Interrupt line = 0Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 7110h, 82371AB PIIX4 ISA Bridge
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 7111h, 82371AB PIIX4 IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = f000h length 16 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 7112h, 82371AB PIIX4 USB Interface
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = e000h length 32 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 10Class = Bridge (Unknown)
Vendor ID = 8086h, Intel Corporation
Device ID = 7113h, 82371AB PIIX4 Power Management Controller
PCI index = 0h
Class Codes = 068000h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 3
Status Reg = 280h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0Class = Multimedia (Audio)
Vendor ID = 1102h, Creative Labs
Device ID = 2h, EMU10000 Sound Blaster Live!
PCI index = 0h
Class Codes = 040100h
Revision ID = 8h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 290h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = e400h length 32 enabled
Subsystem Vendor ID = 1102h
Subsystem ID = 8027h
Max Lat = 20ns
Min Gnt = 2ns
PCI Int Pin = INT A
Interrupt line = 5
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 601h - 0h
Class = Input (Unknown)
Vendor ID = 1102h, Creative Labs
Device ID = 7002h, EMU10000 Game Port
PCI index = 0h
Class Codes = 098000h
Revision ID = 8h
Bus number = 0
Device number = 11
Function num = 1
Status Reg = 290h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
IO Address = e800h length 8 enabled
Subsystem Vendor ID = 1102h
Subsystem ID = 20h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 601h - 0h
Class = Display (VGA)
Vendor ID = 1002h, ATI Technologies
Device ID = 4742h, Rage 3D Pro AGP 2x
PCI index = 0h
Class Codes = 030000h
Revision ID = 5ch
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 290h
Command Reg = 86h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
Mem Address = e4000000h 32bit length 16777216 enabled
IO Address = d000h length 256 disabled
Mem Address = e6000000h 32bit length 4096 enabled
Subsystem Vendor ID = 1002h
Subsystem ID = 64h
Expansion ROM = e5000000h length 131072 disabled
Max Lat = 0ns
Min Gnt = 8ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 50h
Capability ID = 2h
Capabilities = 10h - ff000203h
I apologize for interfering with the thread; I withdraw my question.
regards,
rick
Rick Lake wrote:
Hardware Support Account <> hw@qnx.com> > wrote:
Hi Arturas,
[…]