Hi,
Looking back this appears to be a known issue.
My voyager brings up web pages fine, but things go very odd when I try
to view the help files.
Trasparent windows, trailing what ever is behind it etc…
Is there a fix
I see you normal ask for uname and pci details so here goes
QNX chiliblack 6.1.0 2001/06/25-15:31:48edt x86pc x86
Class = Display (VGA)
Vendor ID = 10deh, Nvidia Corporation
Device ID = 110h, NV11 GeForce 2 MX
PCI index = 0h
Class Codes = 030000h
Class Codes = 030000h
Revision ID = b2h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI Mem Address = fd000000h 32bit length 16777216 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
PCI Expansion ROM = feaf0000h length 65536 disabled
Max Lat = 1ns
Min Gnt = 5ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 60h
Capability ID = 1h
Capabilities = 2h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000017h
Device Dependent Registers:
0x40: 00 00 00 00 02 00 20 00 17 00 00 1f 00 00 00 00
0x50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
0x60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Now there is alot more output from pci -vvv but I only pasted in stuff
regarding the video card, if you need more I would be happy to paste
that in.
TIA
Tommy
Same visual problem on Geforce Quadro in accelerated mode.
Not only with help viewer, with many other applications -
left side is good, but right one is not.
Not accelerated SVGA mode is slow but OK.
Quadro chip is correctly identified.
Tom Holmes wrote:
Hi,
Looking back this appears to be a known issue.
My voyager brings up web pages fine, but things go very odd when I try
to view the help files.
Trasparent windows, trailing what ever is behind it etc…
Is there a fix
I see you normal ask for uname and pci details so here goes
QNX chiliblack 6.1.0 2001/06/25-15:31:48edt x86pc x86
Class = Display (VGA)
Vendor ID = 10deh, Nvidia Corporation
Device ID = 110h, NV11 GeForce 2 MX
PCI index = 0h
Class Codes = 030000h
Class Codes = 030000h
Revision ID = b2h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI Mem Address = fd000000h 32bit length 16777216 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
PCI Expansion ROM = feaf0000h length 65536 disabled
Max Lat = 1ns
Min Gnt = 5ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 60h
Capability ID = 1h
Capabilities = 2h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000017h
Device Dependent Registers:
0x40: 00 00 00 00 02 00 20 00 17 00 00 1f 00 00 00 00
0x50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
0x60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Now there is alot more output from pci -vvv but I only pasted in stuff
regarding the video card, if you need more I would be happy to paste
that in.
TIA
Tommy
Hi Tom,
We have not been able to reproduce the problem here. However,
see the thread “TNT driver trobules” in qdn.public.qnxrtp.photon
for a possible solution to your problem that someone outside of
QNX came up with.
Regards,
Joe
Tom Holmes <tholmes@speakeasy.org> wrote:
Hi,
Looking back this appears to be a known issue.
My voyager brings up web pages fine, but things go very odd when I try
to view the help files.
Trasparent windows, trailing what ever is behind it etc…
Is there a fix
I see you normal ask for uname and pci details so here goes
QNX chiliblack 6.1.0 2001/06/25-15:31:48edt x86pc x86
Class = Display (VGA)
Vendor ID = 10deh, Nvidia Corporation
Device ID = 110h, NV11 GeForce 2 MX
PCI index = 0h
Class Codes = 030000h
Class Codes = 030000h
Revision ID = b2h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI Mem Address = fd000000h 32bit length 16777216 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
PCI Expansion ROM = feaf0000h length 65536 disabled
Max Lat = 1ns
Min Gnt = 5ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 60h
Capability ID = 1h
Capabilities = 2h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000017h
Device Dependent Registers:
0x40: 00 00 00 00 02 00 20 00 17 00 00 1f 00 00 00 00
0x50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
0x60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Now there is alot more output from pci -vvv but I only pasted in stuff
regarding the video card, if you need more I would be happy to paste
that in.
TIA
Tommy
I found a hack somewhere, spatching vserver.file PtOSContainer replaced
with PtContainer and 2 null bytes.
Seems to have done the trick.
Tom
Hardware Support Account wrote:
Hi Tom,
We have not been able to reproduce the problem here. However,
see the thread “TNT driver trobules” in qdn.public.qnxrtp.photon
for a possible solution to your problem that someone outside of
QNX came up with.
Regards,
Joe
Tom Holmes <> tholmes@speakeasy.org> > wrote:
Hi,
Looking back this appears to be a known issue.
My voyager brings up web pages fine, but things go very odd when I try
to view the help files.
Trasparent windows, trailing what ever is behind it etc…
Is there a fix
I see you normal ask for uname and pci details so here goes
QNX chiliblack 6.1.0 2001/06/25-15:31:48edt x86pc x86
Class = Display (VGA)
Vendor ID = 10deh, Nvidia Corporation
Device ID = 110h, NV11 GeForce 2 MX
PCI index = 0h
Class Codes = 030000h
Class Codes = 030000h
Revision ID = b2h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI Mem Address = fd000000h 32bit length 16777216 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
PCI Expansion ROM = feaf0000h length 65536 disabled
Max Lat = 1ns
Min Gnt = 5ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 60h
Capability ID = 1h
Capabilities = 2h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000017h
Device Dependent Registers:
0x40: 00 00 00 00 02 00 20 00 17 00 00 1f 00 00 00 00
0x50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
0x60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Now there is alot more output from pci -vvv but I only pasted in stuff
regarding the video card, if you need more I would be happy to paste
that in.
TIA
Tommy