Help getting graphics adapter working?

QNX Newsgroups (Archives) qdn.public.qnxrtp.newuser
1

I’m having problems getting my Geforce 3 to work in 6.1 RTP.

I have attempting to add an entry to my /etc/system/enum/devices/graphics
for the card, basing my changes on the Geforce 2 listed directly above it in
the file. Using “/x86/usr/sbin/pci -vvv” I was able to see the Vendor ID
was “10deh” and the Device ID was “200h”.

Booting without Photon and running “crttrap trap” shows only vesa devices
being added to graphics-config

Can anyone tell me how all the pieces fit together and allow Photon to see
my card or point me to some info on the net?

Thanks,

Jason Farque’

2

Well I got it figured out I think but the tnt.so blew up on the Geforce 3.
Ah well.

Jason

“Jason Farque” <jasonf@pigging.com> wrote in message
news:9v333s$dov$1@inn.qnx.com…

I’m having problems getting my Geforce 3 to work in 6.1 RTP.

I have attempting to add an entry to my /etc/system/enum/devices/graphics
for the card, basing my changes on the Geforce 2 listed directly above it
in
the file. Using “/x86/usr/sbin/pci -vvv” I was able to see the Vendor ID
was “10deh” and the Device ID was “200h”.

Booting without Photon and running “crttrap trap” shows only vesa devices
being added to graphics-config

Can anyone tell me how all the pieces fit together and allow Photon to see
my card or point me to some info on the net?

Thanks,

Jason Farque’

3

Hi Jason,

We haven’t tried a Geforce 3 here yet. However you can try getting the
updated devg-tnt.so from developers.qnx.com and then on your system
find out the pci vendor and device ID’s (pci -vvv will show this) and
you can try adding the card to /etc/system/enum/devices/graphics
and see if that helps or not.

Erick.


Jason Farque <jasonf@pigging.com> wrote:

Well I got it figured out I think but the tnt.so blew up on the Geforce 3.
Ah well.

Jason

“Jason Farque” <> jasonf@pigging.com> > wrote in message
news:9v333s$dov$> 1@inn.qnx.com> …
I’m having problems getting my Geforce 3 to work in 6.1 RTP.

I have attempting to add an entry to my /etc/system/enum/devices/graphics
for the card, basing my changes on the Geforce 2 listed directly above it
in
the file. Using “/x86/usr/sbin/pci -vvv” I was able to see the Vendor ID
was “10deh” and the Device ID was “200h”.

Booting without Photon and running “crttrap trap” shows only vesa devices
being added to graphics-config

Can anyone tell me how all the pieces fit together and allow Photon to see
my card or point me to some info on the net?

Thanks,

Jason Farque’