hi,
i have a dlink de660+ pcmcia network card in my Thinkpad.I can’t config it
,who can help me?
jszhou
hi,
i have a dlink de660+ pcmcia network card in my Thinkpad.I can’t config it
,who can help me?
jszhou
Hi…
Your card should be listed here:
http://qdn.qnx.com/support/hardware/platform/pcmcia.html
If it is, then do a search for io-net and such here:
http://qdn.qnx.com/support/bok/index.html
You can always ask for more help after you have done your homework,
ofcourse.
Regards…
Miguel.
zjs wrote:
hi,
i have a dlink de660+ pcmcia network card in my Thinkpad.I can’t config it
,who can help me?jszhou
Miguel Simon
Research Engineer
School of Aerospace and Mechanical Engineering
University of Oklahoma
http://www.amerobotics.ou.edu/
http://www.saic.com
thank you,Miguel! but
I found the card.But I can’t use it.
i use pin then it shows “sock=2 func=0 type=networkflags=c—i-±–X----
pid=73741 base=0x200 size=32 irq=5”.
then,
“io-net -d ne2000 ioport=0x200,irq=5 -p ttcpip if=en0:192.168.0.9”
after that
ping 192.168.0.6 (my server)
but it shows
PING 192.168.0.6(192.168.0.6):56 DATA BYTES
PING:SENTO:HOST IS DOWN
PING WROTE 192.168.0.6 64 CHARS ,RET=-1
…
I use nicinfo
it shows
…
total bytes txd=300 (after several pings the would be 600 but it
didn’t increase!);
total bytes rxd=0 (never change!)
…
My pcmcia card is dlink DE-660 ( Pcmcia Ethernet card devn-ne2000 ).
and my computer is Thinkpad A21m (i heard thinkpad has some trouble with
Qnx,is that right?)
what’s wrong with it!
Regards…
Johnson.
“Miguel Simon” <simon@ou.edu> ???:3C9CAEF3.D7807C54@ou.edu…
Hi…
Your card should be listed here:
http://qdn.qnx.com/support/hardware/platform/pcmcia.html
If it is, then do a search for io-net and such here:
http://qdn.qnx.com/support/bok/index.html
You can always ask for more help after you have done your homework,
ofcourse. >Regards…
Miguel.
zjs wrote:
hi,
i have a dlink de660+ pcmcia network card in my Thinkpad.I can’t config
it
,who can help me?jszhou
–
my opinions are mine, only mine, solely mine, and they are not related
in any possible way to the institution(s) in which I study and work.Miguel Simon
Research Engineer
School of Aerospace and Mechanical Engineering
University of Oklahoma
http://www.amerobotics.ou.edu/
http://www.saic.com
You mention that total bytes txd is xxx, what’s the number of txd packets?
If it’s zero, I would say that there is some problem with ioport or irq.
Pavol Kycina
PS: I use De-660+ card succesfully in my ancient notebook. (Dell CPTi266)
“zjs” <jszhou@yahoo.com> wrote in message news:a7rsip$k26$1@inn.qnx.com…
thank you,Miguel! but
I found the card.But I can’t use it.
i use pin then it shows “sock=2 func=0 type=networkflags=c—i-±–X----
pid=73741 base=0x200 size=32 irq=5”.
then,
“io-net -d ne2000 ioport=0x200,irq=5 -p ttcpip if=en0:192.168.0.9”
after that
ping 192.168.0.6 (my server)
but it shows
PING 192.168.0.6(192.168.0.6):56 DATA BYTES
PING:SENTO:HOST IS DOWN
PING WROTE 192.168.0.6 64 CHARS ,RET=-1
…
I use nicinfo
it shows
…
total bytes txd=300 (after several pings the would be 600 but
it
didn’t increase!);
total bytes rxd=0 (never change!)
…
My pcmcia card is dlink DE-660 ( Pcmcia Ethernet card devn-ne2000 ).
and my computer is Thinkpad A21m (i heard thinkpad has some trouble with
Qnx,is that right?)what’s wrong with it!
Regards…
Johnson.
“Miguel Simon” <> simon@ou.edu> > ???:> 3C9CAEF3.D7807C54@ou.edu> …
Hi…Your card should be listed here:
http://qdn.qnx.com/support/hardware/platform/pcmcia.html
If it is, then do a search for io-net and such here:
http://qdn.qnx.com/support/bok/index.html
You can always ask for more help after you have done your homework,
ofcourse. >Regards…
Miguel.
zjs wrote:
hi,
i have a dlink de660+ pcmcia network card in my Thinkpad.I can’t
config
it
,who can help me?jszhou
–
my opinions are mine, only mine, solely mine, and they are not related
in any possible way to the institution(s) in which I study and work.Miguel Simon
Research Engineer
School of Aerospace and Mechanical Engineering
University of Oklahoma
http://www.amerobotics.ou.edu/
http://www.saic.com
IRQ 5 is normally used by audio. Can you change the IRQ by slaying
devp-pccard and re-starting is as “devp-pccard -l7” which will assign
IRQ 7 to the card and then try the driver.
Previously, zjs wrote in qdn.public.qnxrtp.newuser:
thank you,Miguel! but
I found the card.But I can’t use it.
i use pin then it shows “sock=2 func=0 type=networkflags=c—i-±–X----
pid=73741 base=0x200 size=32 irq=5”.
then,
“io-net -d ne2000 ioport=0x200,irq=5 -p ttcpip if=en0:192.168.0.9”
after that
ping 192.168.0.6 (my server)
but it shows
PING 192.168.0.6(192.168.0.6):56 DATA BYTES
PING:SENTO:HOST IS DOWN
PING WROTE 192.168.0.6 64 CHARS ,RET=-1
…
I use nicinfo
it shows
…
total bytes txd=300 (after several pings the would be 600 but it
didn’t increase!);
total bytes rxd=0 (never change!)
…
My pcmcia card is dlink DE-660 ( Pcmcia Ethernet card devn-ne2000 ).
and my computer is Thinkpad A21m (i heard thinkpad has some trouble with
Qnx,is that right?)what’s wrong with it!
Regards…
Johnson.
“Miguel Simon” <> simon@ou.edu> > ???:> 3C9CAEF3.D7807C54@ou.edu> …
Hi…Your card should be listed here:
http://qdn.qnx.com/support/hardware/platform/pcmcia.html
If it is, then do a search for io-net and such here:
http://qdn.qnx.com/support/bok/index.html
You can always ask for more help after you have done your homework,
ofcourse. >Regards…
Miguel.
zjs wrote:
hi,
i have a dlink de660+ pcmcia network card in my Thinkpad.I can’t config
it
,who can help me?jszhou
–
my opinions are mine, only mine, solely mine, and they are not related
in any possible way to the institution(s) in which I study and work.Miguel Simon
Research Engineer
School of Aerospace and Mechanical Engineering
University of Oklahoma
http://www.amerobotics.ou.edu/
http://www.saic.com
Thank all of you,
now all things are ok!
“Hugh Brown” <hsbrown@qnx.com> дÈëÏûÏ¢ÐÂÎÅ
:Voyager.020327084317.7574B@node90.ott.qnx.com…
IRQ 5 is normally used by audio. Can you change the IRQ by slaying
devp-pccard and re-starting is as “devp-pccard -l7” which will assign
IRQ 7 to the card and then try the driver.Previously, zjs wrote in qdn.public.qnxrtp.newuser:
thank you,Miguel! butI found the card.But I can’t use it.
i use pin then it shows “sock=2 func=0 type=networkflags=c—i-±–X----
pid=73741 base=0x200 size=32 irq=5”.
then,
“io-net -d ne2000 ioport=0x200,irq=5 -p ttcpip if=en0:192.168.0.9”
after that
ping 192.168.0.6 (my server)
but it shows
PING 192.168.0.6(192.168.0.6):56 DATA BYTES
PING:SENTO:HOST IS DOWN
PING WROTE 192.168.0.6 64 CHARS ,RET=-1
…
I use nicinfo
it shows
…
total bytes txd=300 (after several pings the would be 600
but it
didn’t increase!);
total bytes rxd=0 (never change!)
…
My pcmcia card is dlink DE-660 ( Pcmcia Ethernet card devn-ne2000 ).
and my computer is Thinkpad A21m (i heard thinkpad has some trouble
with
Qnx,is that right?)what’s wrong with it!
Regards…
Johnson.
“Miguel Simon” <> simon@ou.edu> > ???:> 3C9CAEF3.D7807C54@ou.edu> …
Hi…Your card should be listed here:
http://qdn.qnx.com/support/hardware/platform/pcmcia.html
If it is, then do a search for io-net and such here:
http://qdn.qnx.com/support/bok/index.html
You can always ask for more help after you have done your homework,
ofcourse. >Regards…
Miguel.
zjs wrote:
hi,
i have a dlink de660+ pcmcia network card in my Thinkpad.I can’t
config
it
,who can help me?jszhou
–
my opinions are mine, only mine, solely mine, and they are not related
in any possible way to the institution(s) in which I study and work.Miguel Simon
Research Engineer
School of Aerospace and Mechanical Engineering
University of Oklahoma
http://www.amerobotics.ou.edu/
http://www.saic.com
\
hi,
I want to config my pcmica network card when system boot. how to do?
“Hugh Brown” <hsbrown@qnx.com> дÈëÏûÏ¢ÐÂÎÅ
:Voyager.020327084317.7574B@node90.ott.qnx.com…
IRQ 5 is normally used by audio. Can you change the IRQ by slaying
devp-pccard and re-starting is as “devp-pccard -l7” which will assign
IRQ 7 to the card and then try the driver.Previously, zjs wrote in qdn.public.qnxrtp.newuser:
thank you,Miguel! butI found the card.But I can’t use it.
i use pin then it shows “sock=2 func=0 type=networkflags=c—i-±–X----
pid=73741 base=0x200 size=32 irq=5”.
then,
“io-net -d ne2000 ioport=0x200,irq=5 -p ttcpip if=en0:192.168.0.9”
after that
ping 192.168.0.6 (my server)
but it shows
PING 192.168.0.6(192.168.0.6):56 DATA BYTES
PING:SENTO:HOST IS DOWN
PING WROTE 192.168.0.6 64 CHARS ,RET=-1
…
I use nicinfo
it shows
…
total bytes txd=300 (after several pings the would be 600
but it
didn’t increase!);
total bytes rxd=0 (never change!)
…
My pcmcia card is dlink DE-660 ( Pcmcia Ethernet card devn-ne2000 ).
and my computer is Thinkpad A21m (i heard thinkpad has some trouble
with
Qnx,is that right?)what’s wrong with it!
Regards…
Johnson.
“Miguel Simon” <> simon@ou.edu> > ???:> 3C9CAEF3.D7807C54@ou.edu> …
Hi…Your card should be listed here:
http://qdn.qnx.com/support/hardware/platform/pcmcia.html
If it is, then do a search for io-net and such here:
http://qdn.qnx.com/support/bok/index.html
You can always ask for more help after you have done your homework,
ofcourse. >Regards…
Miguel.
zjs wrote:
hi,
i have a dlink de660+ pcmcia network card in my Thinkpad.I can’t
config
it
,who can help me?jszhou
–
my opinions are mine, only mine, solely mine, and they are not related
in any possible way to the institution(s) in which I study and work.Miguel Simon
Research Engineer
School of Aerospace and Mechanical Engineering
University of Oklahoma
http://www.amerobotics.ou.edu/
http://www.saic.com
\