I don’t know much about qnx but i must create an embedded system using qnx.
I don’t really know where to begin and where to find documentation about
programming qnx rtp 6.0 on an embedded system. I would like to find a book
that could help me understand how to program a good application on qnx (with
tcp/ip communication and HD filesystem + hardware I/O & interupts, using
phab as the UI builder) and that would provide working examples. I tried to
read information on the qnx website but appart from very easy tutorials on
phab and pretty specific information, i did not find any global inforamtion
that would help me construct an application from head to toes.
I am french as you may have guessed so any documentation in french or
english would do!
I don’t know much about qnx but i must create an embedded system using qnx.
I don’t really know where to begin and where to find documentation about
programming qnx rtp 6.0 on an embedded system. I would like to find a book
that could help me understand how to program a good application on qnx (with
tcp/ip communication and HD filesystem + hardware I/O & interupts, using
phab as the UI builder) and that would provide working examples. I tried to
read information on the qnx website but appart from very easy tutorials on
phab and pretty specific information, i did not find any global inforamtion
that would help me construct an application from head to toes.
I am french as you may have guessed so any documentation in french or
english would do!
It doesn’t cover Photon UI nor TCP/IP, but will give you the basics of
the operating system, threads, interrupts, and device drivers.
The website contains a sample chapter, as well as a table-of-contents.
Plus, there’s a video training course available there as well.
Cheers,
-RK
–
Robert Krten, PARSE Software Devices +1 613 599 8316.
Realtime Systems Architecture, Books, Video-based and Instructor-led
Training and Consulting at www.parse.com.
Email my initials at parse dot com.
: I don’t know much about qnx but i must create an embedded system using qnx.
: I don’t really know where to begin and where to find documentation about
: programming qnx rtp 6.0 on an embedded system. I would like to find a book
: that could help me understand how to program a good application on qnx (with
: tcp/ip communication and HD filesystem + hardware I/O & interupts, using
: phab as the UI builder) and that would provide working examples. I tried to
: read information on the qnx website but appart from very easy tutorials on
: phab and pretty specific information, i did not find any global inforamtion
: that would help me construct an application from head to toes.
: I am french as you may have guessed so any documentation in french or
: english would do!
Have you seen the Building Embedded Systems guide? It might not have been
shipped with QNX 6.0, but there’s a copy on the QDN website:
: I don’t know much about qnx but i must create an embedded system using
qnx.
: I don’t really know where to begin and where to find documentation about
: programming qnx rtp 6.0 on an embedded system. I would like to find a
book
: that could help me understand how to program a good application on qnx
(with
: tcp/ip communication and HD filesystem + hardware I/O & interupts, using
: phab as the UI builder) and that would provide working examples. I tried
to
: read information on the qnx website but appart from very easy tutorials
on
: phab and pretty specific information, i did not find any global
inforamtion
: that would help me construct an application from head to toes.
: I am french as you may have guessed so any documentation in french or
: english would do!
Have you seen the Building Embedded Systems guide? It might not have been
shipped with QNX 6.0, but there’s a copy on the QDN website:
Isn’t that a little misleading that in the NC edition docs you’ve included
description of technics and utilities that are available in SE and PE editions
only (eg. mkifs)? As far as I understand I cannot make an OS Image with NC (or
am I missing something?).
Regards,
Grzegorz Wrobel
wrobel@zdania.com.pl Experimental Department of Scientific
phone: (+48 12) 617-2883 Equipment and Automation
fax: (+48 12) 634-2205 30-059 Krakow, al.Mickiewicza 30, Poland
Grzegorz Wrobel <wrobel@kaniup.agh.edu.pl> wrote:
: Steve Reid wrote:
:>
:> PMC <pmccutcheon@arpeco.com> wrote:
:> : Is the link you gave still good?
:>
:> No, the web site has been rearranged. Here’s the new URL:
:>
:> http://www.qnx.com/developer/docs/momentics_nc_docs/neutrino/building/about.html
: ^^^^^^^^
: Isn’t that a little misleading that in the NC edition docs you’ve included
: description of technics and utilities that are available in SE and PE editions
: only (eg. mkifs)? As far as I understand I cannot make an OS Image with NC (or
: am I missing something?).
The docs are the same for all the editions, although SE and PE have docs that
NC doesn’t. We plan to add a note to the utilities etc. that are in the docs
but aren’t provided in all editions.
Steve Reid stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems