Sound Blaster Live in QNX

QNX Newsgroups (Archives) qdn.public.qnxrtp.newuser
1

Hi there,

When I boot into QNX I have to disable the audio drivers or it simply
hangs during boot. I have a Sound Blaster Live Digital. I am very new
to QNX and have been looking around and found the following lines to
mount my sound card (as I believe),

io-audio -dsb ioport=220,irq=5,dma=0,dma1=5 &

mount -Tio-audio -oioport=220,irq=5,dma=0,dma1=5 …
/lib/dll/deva-ctrl-sblive.so &

As I know very very little about QNX I wrote these two lines into a
terminal. The response was that my PC hung just like it does on boot.
Does this mean that my sound card isnt compatible or does this mean that
I am simply typing the wrong information?

I would also like to know how I go about modifying the default boot
options, as I would like to either to get the system to disable the
audio drivers automatically on boot or startup the correct driver. Is
there a file located somewhere that contains a similar line as above
that is causing the system to hang? Again, I know very little about QNX
and file system is very different to me so It’s a bit dangerous for me
to rummage excessively. Thanks in advance.

Nick.

2

Hi Nick,

With regards to mounting your audio driver, we should try and find out why its
hanging the system to start off. If you could post the output from the
following while logged in as root:

pci -vvv
sloginfo

Docs on those two utils can be found here, which explain what they do:
http://www.qnx.com/developer/docs/momentics_nc_docs/neutrino/utilities/p/pci.html
http://www.qnx.com/developer/docs/momentics_nc_docs/neutrino/utilities/s/sloginfo.html

Also it looks like you are starting the driver twice. Typing the following
command should get it going for you:

io-audio -d sblive &

The docs mention a mount command. That is an alternative way of mounting
drivers into the io-* manager. It is implied that io-audio is already running.
See the docs on mount for more details on that:

http://www.qnx.com/developer/docs/momentics_nc_docs/neutrino/utilities/m/mount.html



FYI, to disable the automatic mounting of the sound card, the system boots
up and calls a series of scripts, those scripts then call more scripts etc…

Take a look at the following:

/etc/system/sysinit

look in there for something called “# Enumerate the devices…”

This calls a script /etc/rc.d/rc.devices

What this does is it will enumerate all the different cards/chipsets in
your system and attempt to start drivers for them.

In the rc.devices script, it figures some stuff out (look at the script
for more details) and then calls a utility called enum-devices.

It uses the files located here:

/etc/system/enum/devices

In that directory there is a file called “audio”. Look in this file
for something that calls “deva-ctrl-sblive”. Once you find this, you can
either comment out (use #) all the way back to the “device(pci, ven=$…”
line.

Doing this will stop the system from automatically starting the driver for
you.

Take a look at the following docs for some good details on this stuff:

http://www.qnx.com/developer/docs/momentics_nc_docs/neutrino/utilities/e/enum-devices.html

Best regards,

Erick


Nick <a@a.com> wrote:

Hi there,

When I boot into QNX I have to disable the audio drivers or it simply
hangs during boot. I have a Sound Blaster Live Digital. I am very new
to QNX and have been looking around and found the following lines to
mount my sound card (as I believe),

io-audio -dsb ioport=220,irq=5,dma=0,dma1=5 &

mount -Tio-audio -oioport=220,irq=5,dma=0,dma1=5 …
/lib/dll/deva-ctrl-sblive.so &

As I know very very little about QNX I wrote these two lines into a
terminal. The response was that my PC hung just like it does on boot.
Does this mean that my sound card isnt compatible or does this mean that
I am simply typing the wrong information?

I would also like to know how I go about modifying the default boot
options, as I would like to either to get the system to disable the
audio drivers automatically on boot or startup the correct driver. Is
there a file located somewhere that contains a similar line as above
that is causing the system to hang? Again, I know very little about QNX
and file system is very different to me so It’s a bit dangerous for me
to rummage excessively. Thanks in advance.

Nick.

3

Hi there,

I couldnt actually work out how to get all of the information displayed
with the -v option as there was so much. Without the -v option I got 1
page of information, this is…

PCI version = 2.10

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cbh, Unknown Unknown
PCI index = 0h
PCI IO Address = f800h enabled
PCI IO Address = fa00h enabled
PCI IO Address = f900h enabled
PCI IO Address = fb00h enabled
PCI IO Address = ffa0h enabled
PCI Mem Address = ffeffc00h enabled
PCI Int Pin = INT A
Interrupt line = 7

Class = Display (VGA)
Vendor ID = 10deh, Nvidia Corporation
Device ID = 250h, Unknown Unknown
PCI index = 0h
PCI Mem Address = fd000000h enabled
PCI Mem Address = e8000000h enabled
PCI Mem Address = f4680000h enabled
PCI Expansion ROM = fe9e0000h disabled
PCI Int Pin = INT A
Interrupt line = 11

Class = Multimedia (Audio)
Vendor ID = 1102h, Creative Labs
Device ID = 2h, EMU10000 Sound Blaster Live!
PCI index = 0h
PCI IO Address = d800h enabled
PCI Int Pin = INT A
Interrupt line = 9

Class = Network (Ethernet)
Vendor ID = 10ech, Realtek Semiconductor
Device ID = 8139h, RT8139A/B/C Fast Ethernet Adapter
PCI index = 0h
PCI IO Address = d000h enabled
PCI Mem Address = feaffc00h enabled
PCI Expansion ROM = feae0000h disabled
PCI Int Pin = INT A
Interrupt line = 3

I have an on board sound card which is disabled via the BIOS, could this
be the issue? I could not get the information from sloginfo either as
there was too much again, being able to save all output from the
terminal would be handy but im too much of a newbie to know how. I have
managed to stop my system from hanging on boot byt remming out the sound
blaster live driver from

/etc/system/enum/devices/audio

I have tried to type in the line you suggested

io-audio -d sblive &

But it hangs my system just the same. I hope the information I have
give helps a little, if not let me know how and I will supply more
information. Thanks for your time.

Nick.

4

Nick wrote:

I couldnt actually work out how to get all of the information
displayed with the -v option as there was so much. Without the -v
option I got 1 page of information, this is…

You might want to invest in a book on basic UNIX that will teach you
concepts such as output redirection. For example:

“pci -vvv” by itself prints out more information than will display on
one page. “pci -vvv | more” prints it out one page at a time. This is
called piping. Another option is to redirect the output of pci -vvv to a
file: “pci -vvv > /tmp/pci.txt” Now all the output from pci -vvv is
captured in a file which you can open and edit.

5

Hi Erick,

Here is the output from pci and sloginfo as you requested. I hope that
it is all okay.

Nick.

6

Hi Nick,

Can you try running the following commands after startup:

slay io-audio
io-audio -d sblive pci=0 &

Let me know how that works out. Also can you post the output from:

uname -a

Thanks,

Erick



Nick <a@a.com> wrote:

This is a multi-part message in MIME format.
--------------070709020200050100070100
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Hi Erick,

Here is the output from pci and sloginfo as you requested. I hope that
it is all okay.

Nick.

--------------070709020200050100070100
Content-Type: text/plain;
name=“slog.txt”
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename=“slog.txt”

Time Sev Major Minor Args
Feb 20 19:54:20 3 17 0 Range check failed (IO) - Dev 24cb - Vend 8086 - Class 1018a - Addr 0 - Size 8
Feb 20 19:54:20 3 17 0 Range check failed (IO) - Dev 24cb - Vend 8086 - Class 1018a - Addr 0 - Size 4
Feb 20 19:54:20 3 17 0 Range check failed (IO) - Dev 24cb - Vend 8086 - Class 1018a - Addr 0 - Size 8
Feb 20 19:54:20 3 17 0 Range check failed (IO) - Dev 24cb - Vend 8086 - Class 1018a - Addr 0 - Size 4
Feb 20 19:54:20 3 17 0 Range check failed (IO) - Dev 24cb - Vend 8086 - Class 1018a - Addr ffa0 - Size 10
Feb 20 19:54:20 3 17 0 Range check failed (MEM) - Dev 24cb - Vend 8086 - Class 1018a - Addr 0 - Size 400
Feb 20 19:54:20 2 19 0 eide_identify_devices: Generic IDE vid 8086, did 24cb, class 1018a rev 1, busno 0, dfunc f9
Feb 20 19:54:20 2 19 0 eide_identify_devices: cmd_addr 1f0, cntl_addr 3f4, irq e, chnl 0, udma -1, mdma -1, sdma -1, pio 0
Feb 20 19:54:20 2 19 0 eide_identify_devices: probing dev 0 50
Feb 20 19:54:20 2 19 0 eide_identify_devices: probing dev 1 50
Feb 20 19:54:20 2 19 0 eide_display_devices: Maxtor 4D040H2 tid 0, cable 80, max udma 5, cur udma 5, max mdma 2, cur mdma 0, max sdma -1, cur sdma -1, pio 4, mblk 16
Feb 20 19:54:20 2 19 0 eide_display_devices: FUJITSU MPE3204A tid 1, cable 40, max udma 4, cur udma 4, max mdma 2, cur mdma 0, max sdma -1, cur sdma -1, pio 4, mblk 16
Feb 20 19:54:20 2 19 0 eide_identify_devices: Generic IDE vid 8086, did 24cb, class 1018a rev 1, busno 0, dfunc f9
Feb 20 19:54:20 2 19 0 eide_identify_devices: cmd_addr 170, cntl_addr 374, irq f, chnl 1, udma -1, mdma -1, sdma -1, pio 0
Feb 20 19:54:20 2 19 0 eide_identify_devices: probing dev 0 50
Feb 20 19:54:20 2 19 0 eide_identify_devices: probing dev 1 0
Feb 20 19:54:20 2 19 0 eide_display_devices: SAMSUNG CDRW/DVD tid 0, cable 40, max udma -1, cur udma -1, max mdma 2, cur mdma 2, max sdma 2, cur sdma 0, pio 4, mblk 0
Feb 20 19:54:20 2 19 0 eide_init_devices: Maxtor 4D040H2 path 0, tid 0, udma -1, mdma -1, sdma -1, pio 4, mblk 16
Feb 20 19:54:20 2 19 0 eide_init_devices: FUJITSU MPE3204A path 0, tid 1, udma -1, mdma -1, sdma -1, pio 4, mblk 16
Feb 20 19:54:20 2 19 0 eide_init_devices: SAMSUNG CDRW/DVD path 1, tid 0, udma -1, mdma -1, sdma -1, pio 4, mblk 0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: path=0, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: error=70, sense=5, asc=24, ascq=0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: SK_ILLEGAL command 1a in databyte
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: path=0, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: error=70, sense=5, asc=24, ascq=0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: SK_ILLEGAL command 5a in databyte
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: path=0, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: error=70, sense=5, asc=24, ascq=0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: SK_ILLEGAL command 5a in databyte
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: path=0, target=1, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: error=70, sense=5, asc=24, ascq=0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: SK_ILLEGAL command 1a in databyte
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: path=0, target=1, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: error=70, sense=5, asc=24, ascq=0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: SK_ILLEGAL command 5a in databyte
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: path=0, target=1, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: error=70, sense=5, asc=24, ascq=0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: SK_ILLEGAL command 5a in databyte
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: error=70, sense=6, asc=29, ascq=0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: ASC_BUS_RESET
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: error=70, sense=5, asc=20, ascq=0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: SK_ILLEGAL command 1a in databyte
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:20 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:22 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:22 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:22 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:22 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:22 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:22 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:22 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:22 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:22 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:54:23 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:54:24 5 3 400 [8] fs-pkg built: May 2 2002 22:52:20
Feb 20 19:54:26 5 3 400 Package config file [/etc/system/package/packages]
Feb 20 19:54:26 5 6 200 Installing /dev/par port 378
Feb 20 19:54:26 3 14 0 Using pseudo random generator. See “random” option
Feb 20 19:54:28 5 10 0 rtl: Status 2020
Feb 20 19:54:30 2 8 0 unable to get path to config file
Feb 20 19:54:31 1 8 0 phfont_init
Feb 20 19:54:31 1 8 0 phfontXX started OK - EOK
Feb 20 19:54:31 1 8 0 posted
Feb 20 19:54:31 1 8 0 MainLoop
Feb 20 19:54:31 5 8 0 Plugin gri-photon.so opened successfully
Feb 20 19:54:31 5 8 0 Opened photon connection:
Feb 20 19:54:31 6 8 0 VGA primary : bus 0x1 dev/func 0x0
Feb 20 19:54:31 6 8 0 Found 1 PCI/AGP display devices
Feb 20 19:54:31 6 8 0 pci_init: found PCI device 10de:250
Feb 20 19:54:31 6 8 0 SetDisplayOffset pos: 0 0
Feb 20 19:54:31 6 8 0 SetDisplayOffset pos: 0 0
Feb 20 19:54:33 5 9 0 Start: /usr/photon/bin/devi-hirun kbd fd -d/dev/kbd ps2 mousedev

Feb 20 19:54:38 2 5 0 scsi_interpret_sense: path=0, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:38 2 5 0 scsi_interpret_sense: error=70, sense=5, asc=24, ascq=0
Feb 20 19:54:38 2 5 0 scsi_interpret_sense: SK_ILLEGAL command 1a in databyte
Feb 20 19:54:40 2 5 0 scsi_interpret_sense: path=0, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:40 2 5 0 scsi_interpret_sense: error=70, sense=6, asc=28, ascq=ff
Feb 20 19:54:40 2 5 0 scsi_interpret_sense: ASC_MEDIUM_CHANGED
Feb 20 19:54:41 2 5 0 scsi_interpret_sense: path=0, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:54:41 2 5 0 scsi_interpret_sense: error=70, sense=5, asc=24, ascq=0
Feb 20 19:54:41 2 5 0 scsi_interpret_sense: SK_ILLEGAL command 35 in databyte
Feb 20 19:58:05 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:58:05 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:58:05 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:58:05 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:58:05 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:58:05 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT
Feb 20 19:58:05 2 5 0 scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
Feb 20 19:58:05 2 5 0 scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
Feb 20 19:58:05 2 5 0 scsi_interpret_sense: ASC_MEDIA_NOT_PRESENT

--------------070709020200050100070100
Content-Type: text/plain;
name=“pci.txt”
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename=“pci.txt”



PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1a30h, 82845 Host-Hub Interface Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 11h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents enabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 8086h
Subsystem ID = 1a30h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = e4h
Capability ID = 9h
Capabilities = a104h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000217h
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 35 00 00
0x60: 00 00 04 08 08 08 08 08 00 00 00 00 00 00 00 00
0x70: 00 33 00 00 00 00 00 00 00 02 00 23 71 01 02 20
0x80: d1 00 82 15 00 00 00 00 00 80 01 00 00 00 00 00
0x90: 30 11 11 00 00 33 33 00 41 19 00 00 00 0a 38 00
0xA0: 02 00 20 00 17 02 00 1f 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 30 00 00 00 00 00 00 00 20 10 00 00
0xC0: 44 40 50 11 00 10 05 18 00 00 00 00 00 00 00 00
0xD0: 02 28 00 0e 0b 00 00 33 af 01 31 b5 00 00 09 00
0xE0: 00 00 00 00 09 a0 04 a1 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 74 f8 20 98 38 0f 00 00 04 00 00 00



Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1a31h, 82845 AGP Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 11h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a0h
Command Reg = 107h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents enabled
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 22a0h
Memory Base = fc90h
Memory Limit = fe90h
Prefetchable Memory Base = e450h
Prefetchable Memory Limit= f460h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 10ns
PCI Int Pin = NC
Interrupt line = 0
Device Dependent Registers:
0x40: 00 00 0a 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 08 00 00 00 00 00
0x60: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00



Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c2h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 29
Function num = 0
Status Reg = 280h
Command Reg = 5h
I/O space access enabled
Memory space access disabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = e800h length 32 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 132h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 11
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 30 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 60 0f 00 00 00 00 00 00



Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c4h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 29
Function num = 1
Status Reg = 280h
Command Reg = 5h
I/O space access enabled
Memory space access disabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = e880h length 32 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 132h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 5
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 30 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 60 0f 00 00 00 00 00 00



Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c7h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 29
Function num = 2
Status Reg = 280h
Command Reg = 5h
I/O space access enabled
Memory space access disabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = ec00h length 32 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 132h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 9
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 30 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 60 0f 00 00 00 00 00 00



Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cdh, Unknown Unknown
PCI index = 0h
Class Codes = 0c0320h
Revision ID = 1h
Bus number = 0
Device number = 29
Function num = 7
Status Reg = 290h
Command Reg = 106h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents enabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = febffc00h 32bit length 1024 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 132h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h
Capability ID = ah
Capabilities = 2080h - 0h
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 01 58 c2 c9 00 00 00 00 0a 00 80 20 00 00 00 00
0x60: 20 20 7f 00 00 00 00 00 01 00 00 00 00 00 00 c0
0x70: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 10 00 15 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 78 bf 1f 00 88 83 00 00 60 0f 00 00 06 00 00 00



Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 81h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 8080h
Command Reg = 107h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents enabled
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 20h
I/O Base = d0h
I/O Limit = d0h
Secondary Status = 2280h
Memory Base = fea0h
Memory Limit = fea0h
Prefetchable Memory Base = f470h
Prefetchable Memory Limit= f470h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 6ns
PCI Int Pin = NC
Interrupt line = 0
Device Dependent Registers:
0x40: 00 00 06 00 02 28 20 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 06 74 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 88 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 10 00 08 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 01 00 02 00 03 00 c0 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 60 0f 00 00



Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c0h, Unknown Unknown
PCI index = 0h
Class Codes = 060100h
Revision ID = 1h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = 10fh
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations monitor
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents enabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Device Dependent Registers:
0x40: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 02 00
0x50: 00 00 00 00 00 00 00 00 81 04 00 00 10 00 00 00
0x60: 0b 03 07 05 d0 00 00 00 80 80 0b 0a 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 30 02 00 00 01 00 00 00 0d 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 86 21 00 00 02 0f 00 00 04 00 00 00 00 00 00 00
0xE0: 10 00 00 80 81 06 0f 14 33 22 11 00 00 00 67 45
0xF0: 00 00 60 00 00 00 00 00 60 0f 02 00 00 02 81 02



Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cbh, Unknown Unknown
PCI index = 0h
Class Codes = 01018ah
Revision ID = 1h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = f800h length 8 enabled
PCI IO Address = fa00h length 4 enabled
PCI IO Address = f900h length 8 enabled
PCI IO Address = fb00h length 4 enabled
PCI IO Address = ffa0h length 16 enabled
PCI Mem Address = ffeffc00h 32bit length 1024 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 132h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 7
Device Dependent Registers:
0x40: 77 e3 03 a3 0b 00 00 00 03 00 21 00 00 00 00 00
0x50: 00 00 00 00 33 14 00 00 00 00 00 00 00 00 00 00
0x60: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 60 0f 00 00 00 00 00 00



Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c3h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 1h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
I/O space access enabled
Memory space access disabled
Bus Master disabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = e480h length 32 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 132h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 3
Device Dependent Registers:
0x40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 60 0f 00 00 00 00 00 00



Class = Display (VGA)
Vendor ID = 10deh, Nvidia Corporation
Device ID = 250h, Unknown Unknown
PCI index = 0h
Class Codes = 030000h
Revision ID = a3h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI Mem Address = fd000000h 32bit length 16777216 enabled
PCI Mem Address = e8000000h prefetchable 32bit length 134217728 enabled
PCI Mem Address = f4680000h prefetchable 32bit length 524288 enabled
Subsystem Vendor ID = 10deh
Subsystem ID = 130h
PCI Expansion ROM = fe9e0000h length 131072 disabled
Max Lat = 1ns
Min Gnt = 5ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 60h
Capability ID = 1h
Capabilities = 2h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000217h
Device Dependent Registers:
0x40: de 10 30 01 02 00 20 00 17 02 00 1f 00 00 00 00
0x50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
0x60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00



Class = Communication (Unknown)
Vendor ID = 11c1h, Agere Systems
Device ID = 452h, LT Winmodem
PCI index = 0h
Class Codes = 078000h
Revision ID = 2h
Bus number = 2
Device number = 1
Function num = 0
Status Reg = 290h
Command Reg = 107h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents enabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI Mem Address = feaff800h 32bit length 256 enabled
PCI IO Address = d880h length 8 enabled
PCI IO Address = d400h length 256 enabled
CardBus CIS Pointer = 40h
Subsystem Vendor ID = 144fh
Subsystem ID = 1513h
Max Lat = 14ns
Min Gnt = 252ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = f8h
Capability ID = 1h
Capabilities = e4e2h - 0h
Device Dependent Registers:
0x40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0xA0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0xB0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0xC0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0xD0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0xE0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0xF0: ff ff ff ff 00 00 00 00 01 00 e2 e4 00 00 00 00



Class = Multimedia (Audio)
Vendor ID = 1102h, Creative Labs
Device ID = 2h, EMU10000 Sound Blaster Live!
PCI index = 0h
Class Codes = 040100h
Revision ID = 7h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 290h
Command Reg = 105h
I/O space access enabled
Memory space access disabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents enabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = d800h length 32 enabled
Subsystem Vendor ID = 1102h
Subsystem ID = 8064h
Max Lat = 20ns
Min Gnt = 2ns
PCI Int Pin = INT A
Interrupt line = 9
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 601h - 0h
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 06
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00



Class = Input (Unknown)
Vendor ID = 1102h, Creative Labs
Device ID = 7002h, EMU10000 Game Port
PCI index = 0h
Class Codes = 098000h
Revision ID = 7h
Bus number = 2
Device number = 2
Function num = 1
Status Reg = 290h
Command Reg = 105h
I/O space access enabled
Memory space access disabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents enabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = dc00h length 8 enabled
Subsystem Vendor ID = 1102h
Subsystem ID = 20h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 601h - 0h
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 06
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00



Class = Network (Ethernet)
Vendor ID = 10ech, Realtek Semiconductor
Device ID = 8139h, RT8139A/B/C Fast Ethernet Adapter
PCI index = 0h
Class Codes = 020000h
Revision ID = 10h
Bus number = 2
Device number = 12
Function num = 0
Status Reg = 280h
Command Reg = 107h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents enabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = d000h length 256 enabled
PCI Mem Address = feaffc00h 32bit length 256 enabled
Subsystem Vendor ID = 10ech
Subsystem ID = 8139h
PCI Expansion ROM = feae0000h length 65536 disabled
Max Lat = 64ns
Min Gnt = 32ns
PCI Int Pin = INT A
Interrupt line = 3
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

--------------070709020200050100070100–

7

Hi Erick,

After typing the line ‘slay io-audio’ I recieved the message “slay:
unable to find process ‘io-audio’”. And then after typing the line
‘io-audio -d sblive pci=0 &’ I recieved the message “[1] 536606” then
the system hung.

I will write the output from ‘uname -a’ as there is only 1 line, which is,

QNX 1 6.2.0 2002/05/21-12:17:24edt x86pc x86

I hppe this information helps, seems like its going to be a confusing
one, which is pretty typical for myself. Thanks for your help again.

Nick.

8

Its nice when correspondance comes to a stand still, hence I have lost faith
in QNX many a time.

Nick.

–

I disclaim anything that was previously
stated in this post, it wasnt me I didnt do it…

http://members.lycos.co.uk/nickpatemanpwp/

“Nick” <a@a.com> wrote in message news:3E5A758C.2080905@a.com…

Hi Erick,

After typing the line ‘slay io-audio’ I recieved the message “slay:
unable to find process ‘io-audio’”. And then after typing the line
‘io-audio -d sblive pci=0 &’ I recieved the message “[1] 536606” then
the system hung.

I will write the output from ‘uname -a’ as there is only 1 line, which is,

QNX 1 6.2.0 2002/05/21-12:17:24edt x86pc x86

I hppe this information helps, seems like its going to be a confusing
one, which is pretty typical for myself. Thanks for your help again.

Nick.

9

So have I. If it isn’t the audio, it is the network drivers. Without being
able to communicate properly over a TCP/IP connection, any projects I want
to do get sent to Linux. I really, really want to use QNX, but setting up
hardware is such a pain, and most of the time I will look for information or
post a question and all of a sudden, my problem with QNX goes forever by the
wayside.


“Nick” <a@a.com> wrote in message news:b4n1f4$fiv$1@inn.qnx.com…

Its nice when correspondance comes to a stand still, hence I have lost
faith
in QNX many a time.

Nick.

–

I disclaim anything that was previously
stated in this post, it wasnt me I didnt do it…

http://members.lycos.co.uk/nickpatemanpwp/

“Nick” <> a@a.com> > wrote in message news:> 3E5A758C.2080905@a.com> …
Hi Erick,

After typing the line ‘slay io-audio’ I recieved the message “slay:
unable to find process ‘io-audio’”. And then after typing the line
‘io-audio -d sblive pci=0 &’ I recieved the message “[1] 536606” then
the system hung.

I will write the output from ‘uname -a’ as there is only 1 line, which
is,

QNX 1 6.2.0 2002/05/21-12:17:24edt x86pc x86

I hppe this information helps, seems like its going to be a confusing
one, which is pretty typical for myself. Thanks for your help again.

Nick.

10

As I know very very little about QNX I wrote these two lines into a
terminal. The response was that my PC hung just like it does on boot.
Does this mean that my sound card isnt compatible or does this mean that
I am simply typing the wrong information?

This seems like it is likly a compatibility issue. Perhaps the card is
locking up the PCI bus due to the driver. Have you tried this with 6.2.1
yet?

You can disable the audio driver by simply deleting it from /lib/dll or
by editing the file in /etc/enum/devices/audio and removing your device
from the list of PCI ids.

chris

–
Chris McKillop <cdm@qnx.com> “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/