hello,
i am very new to qnx. when i boot my laptop into qnx and open the network
configuration app, no devices tab appears, but if i run pin and pin con at
the terminal it sees my linksys ec2t card.
what do i need to do to get this card to work?
hello,
i am very new to qnx. when i boot my laptop into qnx and open the network
configuration app, no devices tab appears, but if i run pin and pin con at
the terminal it sees my linksys ec2t card.
what do i need to do to get this card to work?
Previously, Michelangelo Capraro wrote in qdn.public.qnxrtp.installation:
hello,
i am very new to qnx. when i boot my laptop into qnx and open the network
configuration app, no devices tab appears, but if i run pin and pin con at
the terminal it sees my linksys ec2t card.what do i need to do to get this card to work?
From ‘root’ do the following:
Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
thanks! it worked!
Hugh Brown wrote:
Previously, Michelangelo Capraro wrote in
qdn.public.qnxrtp.installation:
hello,
i am very new to qnx. when i boot my laptop into qnx and open the
network
configuration app, no devices tab appears, but if i run pin and pin
con at
the terminal it sees my linksys ec2t card.what do i need to do to get this card to work?
From ‘root’ do the following:
- slay io-net
- do a ‘pin’ and note the I/O port and IRQ for your card
- io-net -dne2000 ioport=0xaaa,irq=bb -pttcpip if=en0:xx.xx.xx.xx
where aaa id the I/O port from pin and bb is the irq and xx.xx is
your IP
address.- nicinfo should show you the MAC address of your ethernet adapter
and
also show you whether it is receiving and transmitting packets.
–Hugh Brown (613) 591-0931 ext. 209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: > hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8