Hi,
I realize that this card isn’t specifically supported, but when I put
it in my NEC laptop and boot the Jan 18th version of RTP, the
machine comes to a screeching halt! So much in fact, that the
mouse pointer can hardly be moved.
Specs: TRENDnet TE-210CT PCMCIA 10Mbps ethernet card
It is supposed to be NE2000 compatible, and I haven’t had any
problems using it under other OSs…
Is there something I can do to help make it RTP friendly?
Thanks!
Kevin
I forgot to mention that when RTP boots, it spits out the following message
repeatedly:
ne2000_outs: Unable to set write address
Kevin
Hi Kevin,
Could you do the following:
Thanks!
Erick.
Kevin Radke <kradke@dsi-inc.net> wrote:
Hi,
I realize that this card isn’t specifically supported, but when I put
it in my NEC laptop and boot the Jan 18th version of RTP, the
machine comes to a screeching halt! So much in fact, that the
mouse pointer can hardly be moved.Specs: TRENDnet TE-210CT PCMCIA 10Mbps ethernet card
It is supposed to be NE2000 compatible, and I haven’t had any
problems using it under other OSs…Is there something I can do to help make it RTP friendly?
Thanks!
Kevin
Hi Kevin,
Sorry I should have specified to insert the card once you got
devp-pccard running 
Anyway there has been a fix with devp-pccard that applies to PCI
to PCMCIA bridge chips, this will be included with QNX 6.0.0b
(patch B) which should be out very shortly.
If you could try the new patch once it comes out and let us know
if that helps.
Thanks again
Erick.
Hardware Support Account <hw@qnx.com> wrote:
Hi Kevin,
Could you do the following:
- Boot the machine without the ethernet card
- Login as root and slay devp-pccard
- ‘devp-pccard’
- ‘pin > file’
- ‘pin cis >> file’
- ‘pci -v >> file’
- Send me ‘file’ to > emuis@qnx.com
Thanks!
Erick.
Kevin Radke <> kradke@dsi-inc.net> > wrote:Hi,
I realize that this card isn’t specifically supported, but when I put
it in my NEC laptop and boot the Jan 18th version of RTP, the
machine comes to a screeching halt! So much in fact, that the
mouse pointer can hardly be moved.Specs: TRENDnet TE-210CT PCMCIA 10Mbps ethernet card
It is supposed to be NE2000 compatible, and I haven’t had any
problems using it under other OSs…Is there something I can do to help make it RTP friendly?
Thanks!
Kevin
I thought it was funny you wanted the info without the card in. Just as
an FYI, here it is WITH the card inserted still using patch A…
Sock Func Type Flags PID Base Size IRQ
1 0 Network C—I-±-------- None 0x230 32 3
1 Empty ----MF---------- None
2 0 Serial C—I-±-------- None 0x2f8 8 7
2 Empty ----MF---------- None
Socket : 1 - Function : 0
Device : Function Specific 16k
Device : Flash 60k
Attribute Device : Flash 4k
Manufacturer ID : 0x149 0xc1ab
Card tuple version : 4.01
Manufacturer : Ethernet
Name of Product : Adapter
Add’nl info (lot #) : 2.0
Configuration base/st : 0xfd0 0-subtuples
Configuration Index : 0x0 Default
Interface : MWait Req’d, I/O
Feature : 0x18
IO Space : Bus16 0x0-0x1F(5 lines)
IRQ Description : Level 2 3 4 5 6 7 9 10 11 12 13 15
Configuration Index : 0x1
Feature : 0x8
IO Space : Bus16 0x300-0x31F
Configuration Index : 0x2
Feature : 0x8
IO Space : Bus16 0x320-0x33F
Configuration Index : 0x3
Feature : 0x8
IO Space : Bus16 0x340-0x35F
Configuration Index : 0x4
Feature : 0x8
IO Space : Bus16 0x380-0x39F
Configuration Index : 0x5
Feature : 0x8
IO Space : Bus16 0x200-0x21F
PC Card function : Network LAN Adapter
POST : 0x0
Socket : 2 - Function : 0
Device : Null 0k
Card tuple version : 5.00
Manufacturer : Megahertz
Name of Product : XJ1288/CC1288
Add’nl info (lot #) : Megahertz V.34 Modem
Manufacturer ID : 0x102 0x2b
Configuration base/st : 0x300 0-subtuples
Configuration Index : 0x20 Default
Interface : RdyBsy Active, I/O
Feature : 0x99
IO Space : Bus8 0x3F8-0x3FF
IRQ Description : Level 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Misc :
Configuration Index : 0x21
Feature : 0x8
IO Space : Bus8 0x2F8-0x2FF
Configuration Index : 0x22
Feature : 0x8
IO Space : Bus8 0x3E8-0x3EF
Configuration Index : 0x23 Last
Feature : 0x8
IO Space : Bus8 0x2E8-0x2EF
PC Card function : Serial Port
POST : 0x1
Tuple 0x22 link=4 : 00 02 0f 7c
Tuple 0x22 link=9 : 01 1f 0d 00 03 00 00 03
: 00
Tuple 0x22 link=12 : 02 06 00 3f 1c 03 03 0f
: 07 00 02 b5
Tuple 0x22 link=8 : 13 06 00 0f 00 02 00 b5
Tuple 0x22 link=8 : 23 06 00 0f 00 02 00 b5
Tuple 0x80 link=10 : 02 01 2b 00 01 00 00 00
: 00 ff
PCI version = 2.10
Class = Bridge (Host/PCI)
Vendor ID = 1045h, OPTi Inc.
Device ID = c557h, 82C557 CPU Bridge (Viper)
PCI index = 0h
Class Codes = 060000h
Revision ID = 14h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Bridge (PCI/ISA)
Vendor ID = 1045h, OPTi Inc.
Device ID = c558h, 82C558 ISA Bridge w/PnP
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 8280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Display (VGA)
Vendor ID = 102ch, Chips And Technologies
Device ID = e0h, 65550 LCD/CRT controller
PCI index = 0h
Class Codes = 030000h
Revision ID = c6h
Bus number = 0
Device number = 2
Function num = 0
Status Reg = 280h
Command Reg = 1c3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Mem Address = c1000000h 32bit length 16777216 enabled
Expansion ROM = c000000h length 262144 disabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Bridge (PCI/PCMCIA)
Vendor ID = 1217h, O2Micro Inc
Device ID = 673ah, OZ6730 PCI to PCMCIA Bridge
PCI index = 0h
Class Codes = 060500h
Revision ID = 2h
Bus number = 0
Device number = 3
Function num = 0
Status Reg = 200h
Command Reg = 3h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 11
Class = Mass Storage (IDE)
Vendor ID = 1045h, OPTi Inc.
Device ID = c621h, 82C621 PCI IDE Controller (PIC)
PCI index = 0h
Class Codes = 010180h
Revision ID = 12h
Bus number = 0
Device number = 20
Function num = 0
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
IO Address = 1000h length 16 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Anyway there has been a fix with devp-pccard that applies to PCI
to PCMCIA bridge chips, this will be included with QNX 6.0.0b
(patch B) which should be out very shortly.If you could try the new patch once it comes out and let us know
if that helps.
I swapped the hard drive to another machine so I could install patch B/C.
This didn’t help the network problem any, and now photon doesn’t
ever recognize the input device unless I boot into safe mode and
start it manually.
Kevin